Safe-T Mate Wheelchair Rear Anti-Tippers Instruction Manual

1. Introduction

The Wright Stuff Safe-T Mate Wheelchair Rear Anti-Tippers are designed to enhance the safety of wheelchair users by preventing backward tipping. This accessory provides stability, particularly when the user exerts rearward force, such as when sitting into, standing from, or seated in the wheelchair. These anti-tippers feature a universal fit and height adjustability, making them compatible with a wide range of wheelchair models. Their innovative design allows for precise positioning to meet individual user needs and contribute to fall prevention.

2. Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage. These anti-tippers are intended to reduce the risk of backward tipping but do not eliminate all risks associated with wheelchair use. Always exercise caution and ensure the anti-tippers are properly installed and adjusted before each use.

• Regularly inspect the anti-tippers for any signs of wear, damage, or loose components.
• Ensure all mounting hardware is securely tightened.
• Do not use if any part is damaged or missing.
• Consult a healthcare professional or qualified technician if you have any doubts about proper installation or use.

3. Product Components

Each package of Safe-T Mate Wheelchair Rear Anti-Tippers includes:

• One (1) pair of rear anti-tippers (left and right).
• All necessary mounting hardware for attachment to wheelchair tubing.

The mounting brackets are constructed from chrome-plated 11 gauge steel, and the legs are made from heavy-duty chrome-plated rectangular steel bar stock, ensuring durability and strength. The anti-tippers feature 2-inch diameter easy-gliding wheels.

Image: The Safe-T Mate Wheelchair Rear Anti-Tippers installed on a wheelchair, showing the extension arms and small wheels designed to prevent backward tipping.

4. Setup and Installation

The Safe-T Mate Anti-Tippers are designed for easy installation and universal fit on most wheelchairs with tubing sizes of 3/4 inch, 7/8 inch, or 1 inch. Follow these steps for proper installation and adjustment:

1. Identify Mounting Points: Locate the vertical or horizontal tubing on the rear frame of your wheelchair where the anti-tippers will be attached. Ensure the chosen location does not interfere with the wheelchair's folding mechanism or other components.
2. Attach Mounting Brackets: Loosely attach the anti-tipper mounting brackets to the wheelchair frame tubing using the provided hardware. The unique sliding adjustment allows for flexibility in positioning.
3. Adjust Height: The anti-tippers offer 10 full inches of height adjustment. With the user seated in the wheelchair (if possible, or simulate weight), adjust the height of the anti-tipper wheels so they are approximately 1 to 2 inches off the ground. This allows for normal wheelchair movement while providing support if the chair begins to tip backward. The innovative mounting style allows users to position the anti-tippers at any height needed along the wheelchair frame.
4. Secure Fasteners: Once the desired height and position are achieved, securely tighten all bolts and fasteners on the mounting brackets. Ensure the anti-tippers are firmly attached and do not wobble.
5. Test Stability: Carefully test the wheelchair's stability by gently attempting to tip it backward. The anti-tipper wheels should make contact with the ground, preventing further tipping. Adjust if necessary.

It is recommended to have assistance during the initial installation and adjustment process to ensure optimal safety and performance.

5. Operating Instructions

Once properly installed and adjusted, the Safe-T Mate Wheelchair Rear Anti-Tippers operate automatically to enhance safety. They are designed to engage when the wheelchair's center of gravity shifts too far backward, preventing the chair from tipping over. The 2-inch diameter wheels allow for smooth gliding over surfaces if they make contact during a tipping event, helping to maintain control.

No specific user action is required for the anti-tippers to function during normal operation. However, users should always be aware of their surroundings and avoid sudden movements that could compromise stability.

6. Maintenance

To ensure the longevity and continued effectiveness of your Safe-T Mate Wheelchair Rear Anti-Tippers, regular maintenance is recommended:

• Cleaning: Wipe down the anti-tippers with a damp cloth to remove dirt and debris. Avoid abrasive cleaners that could damage the chrome finish.
• Inspection: Periodically inspect the anti-tippers for any signs of wear, bending, cracks, or corrosion, especially on the steel components and wheels.
• Fastener Check: Regularly check all bolts and fasteners to ensure they remain tight. Re-tighten if any looseness is detected.
• Wheel Condition: Ensure the 2-inch wheels spin freely and are not obstructed by debris.

If any significant damage or wear is observed, discontinue use and contact the manufacturer or a qualified technician for assistance.

7. Troubleshooting

If you encounter issues with your Safe-T Mate Wheelchair Rear Anti-Tippers, consider the following:

If the problem persists after attempting these solutions, please contact The Wright Stuff customer support.

8. Specifications

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact The Wright Stuff directly. Their customer service team can provide assistance with any questions or concerns you may have about your Safe-T Mate Wheelchair Rear Anti-Tippers.

You can typically find contact information on the manufacturer's official website or through the retailer where the product was purchased.