Introduction
The Odyssey LSPAR20B is a versatile black aluminum PAR 20 light fixture designed for various lighting applications, including DJ setups, architectural lighting, and accentuating specific areas like tables, backdrops, and hallways. This manual provides essential information for the safe and effective use of your light fixture.
Key features include a durable black aluminum exterior, an E26/E27 medium screw bulb base (lamp not included), an octagonal gel frame with an easy-secure spring clip, and an Edison 3-prong A/C cord with a 3.5-inch hanging yoke.
Safety Information
Please read and understand all safety instructions before installing or operating this fixture. Failure to do so may result in electric shock, fire, or personal injury.
- Electrical Safety: Ensure the power supply voltage matches the fixture's requirements. Always disconnect power before servicing or changing the lamp.
- Lamp Compatibility: Use only PAR 20 lamps with an E26/E27 medium screw base that are rated for the fixture's wattage. Do not exceed the maximum wattage specified for the fixture.
- Heat: Lighting fixtures generate heat. Allow sufficient cooling time before handling. Do not operate near flammable materials.
- Mounting: Securely mount the fixture using the provided hanging yoke. Ensure the mounting surface can support the weight of the fixture.
- Ventilation: Do not obstruct ventilation openings. Ensure adequate airflow around the fixture to prevent overheating.
- Indoor Use Only: This fixture is designed for indoor use. Do not expose to moisture or outdoor elements.
Figure 1: Side view of the Odyssey LSPAR20B PAR 20 Light Fixture, showing the "ATTENTION" warning label regarding electrical safety and lamp specifications.
Package Contents
Verify that all items are present in the package:
- Odyssey PAR 20 Pro PAR Can Black (LSPAR20B)
- Octagonal Gel Frame
- Edison 3-Prong A/C Cord
- 3.5-inch Hanging Yoke
- Note: Lamp (bulb) is not included and must be purchased separately.
Setup
- Install the Lamp:
- Ensure the fixture is unplugged from any power source.
- Carefully screw an E26/E27 medium screw base PAR 20 lamp (not included) into the bulb socket. Do not overtighten.
- Verify the lamp wattage does not exceed the fixture's maximum rating.
- Attach the Gel Frame:
- The octagonal gel frame can be inserted into the front of the fixture.
- Secure it using the easy-secure gel frame spring clip to hold color gels or diffusion filters (not included) in place.
- Mounting the Fixture:
- The 3.5-inch hanging yoke allows for versatile mounting.
- Use appropriate clamps or hardware (not included) to securely attach the yoke to a truss, stand, or other stable structure.
- Adjust the angle of the fixture using the side knobs on the yoke, then tighten to secure the desired position.
Figure 2: Front view of the Odyssey LSPAR20B PAR 20 Light Fixture, illustrating the octagonal gel frame attachment point.
Figure 3: Rear view of the Odyssey LSPAR20B PAR 20 Light Fixture, showing the power cord connection and ventilation holes.
Operating Instructions
- Power Connection:
- Once the lamp is installed and the fixture is securely mounted, plug the Edison 3-prong A/C cord into a compatible power outlet.
- Activation:
- The fixture will illuminate upon receiving power. There is no on/off switch directly on the unit.
- To control power, use an external switch, dimmer, or power strip.
- Adjusting Light Direction:
- Loosen the side knobs on the hanging yoke to adjust the tilt angle of the fixture.
- Once the desired angle is achieved, tighten the knobs firmly to secure the position.
Maintenance
- Cleaning:
- Disconnect power before cleaning.
- Wipe the exterior of the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure ventilation holes are free from dust and debris.
- Lamp Replacement:
- Always disconnect power and allow the fixture to cool completely before attempting to replace the lamp.
- Unscrew the old lamp and carefully screw in a new, compatible PAR 20 lamp with an E26/E27 base.
- Inspection: Periodically inspect the power cord for any signs of damage. If damaged, discontinue use and replace the cord.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. | No power to the outlet. Lamp is burnt out or loose. Faulty power cord. | Check power outlet with another device. Replace lamp or ensure it is screwed in tightly. Inspect power cord for damage; replace if necessary. |
| Light flickers. | Loose lamp connection. Incompatible dimmer (if used). Lamp nearing end of life. | Tighten lamp in socket. Ensure dimmer is compatible with PAR 20 lamps. Replace lamp. |
| Fixture gets excessively hot. | Incorrect lamp wattage. Poor ventilation. | Ensure lamp wattage does not exceed fixture's maximum rating. Clear any obstructions around ventilation holes. |
Specifications
| Model Name | LSPAR20B |
| Brand | Odyssey |
| Color | Black |
| Material | Aluminum (Exterior) |
| Bulb Base | E26/E27 Medium Screw (Standard Household Base) |
| Lamp Included | No |
| Power Cord | Edison 3-Prong A/C Cord |
| Hanging Yoke | 3.5 inches |
| Approx. Dimensions (W x D x H) | 4.5" x 6.75" x 3.5" |
| Approx. Weight | 0.7 lbs (0.32 kg) |
| UPC | 807822080490 |
Warranty Information
This Odyssey LSPAR20B light fixture is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Odyssey customer support.
Support
For technical assistance, replacement parts, or further inquiries, please visit the official Odyssey website or contact their customer support department. You can find more information and products at the Odyssey Store on Amazon.
