Introduction
The Mr. Beams MB310 Wireless LED Mini Spotlight is a battery-operated lighting solution designed for both indoor and outdoor use. It features an integrated motion sensor and photocell, ensuring automatic activation in low-light conditions when motion is detected. This manual provides instructions for setup, operation, and maintenance of your spotlight.
Image: The Mr. Beams MB310 Wireless LED Mini Spotlight. This compact, brown-colored spotlight features a motion sensor and LED light, designed for versatile placement.
What's Included
Your Mr. Beams MB310 package should contain the following items:
- Mr. Beams MB310 Wireless LED Mini Spotlight
- Mounting Hardware & Anchor
- User Manual (this document)
Specifications
| Luminous Flux | 80 Lumens |
| Light Color Temperature | 4000K |
| Lighting Modes | Motion Activated |
| Motion Angle of Detection | 120° |
| Motion Range | Up to 25 ft. |
| Auto Shut Off | 30 seconds |
| Power Source | 3 C-cell Batteries (Not Included) |
| Operating Conditions | 0 - 131°F |
| Mounting | Wall or Eave |
| Weatherproof Rating | IPX5 |
| Unit Dimensions | 3.15 x 3.35 x 3.15 Inches |
| Unit Weight | 0.49 Pounds |
Setup and Installation
The Mr. Beams MB310 spotlight is designed for simple, wireless installation without the need for an electrician. It can be mounted to any flat surface, such as a wall or eave.
Battery Installation:
- Locate the battery compartment on the back of the spotlight.
- Open the compartment cover.
- Insert 3 C-cell batteries (not included), ensuring correct polarity.
- Securely close the battery compartment cover.
Mounting the Spotlight:
- Choose a desired mounting location on a flat surface (wall or eave).
- Use the provided mounting hardware and anchor to secure the spotlight's base.
- Adjust the spotlight head to point in the desired direction for optimal light coverage.
Image: A Mr. Beams spotlight provides illumination for a family in their backyard at night, demonstrating its outdoor utility.
Operating Instructions
The Mr. Beams MB310 spotlight operates automatically using its integrated motion sensor and photocell.
- Automatic Activation: The built-in photocell ensures the spotlight only activates after dark, conserving battery life during daylight hours.
- Motion Detection: The motion sensor detects movement from up to 30 feet away within a 120° angle.
- Light Duration: Once activated by motion, the LED spotlight will remain on for 30 seconds before automatically turning off if no further motion is detected.
- Coverage: Each mini spotlight provides approximately 350 square feet of light coverage.
Image: A Mr. Beams spotlight illuminates a pathway next to a house, activated by a person walking by at night.
Image: The Mr. Beams spotlight provides light for a person opening a sliding glass door at night, enhancing visibility.
Maintenance
Battery Replacement:
When the light appears dim or begins to activate unnecessarily, it is an indication that the batteries need to be replaced. Follow the battery installation steps in the "Setup and Installation" section to replace the 3 C-cell batteries.
Cleaning:
Wipe the exterior of the spotlight with a soft, damp cloth as needed. Do not use abrasive cleaners or solvents.
Troubleshooting
- Light is dim or flickers: This typically indicates low battery power. Replace the 3 C-cell batteries.
- Light does not turn on:
- Ensure it is dark enough for the photocell to activate.
- Check battery installation and replace if necessary.
- Verify the motion sensor is not obstructed and is within range of detection.
- Light stays on constantly: This could indicate a faulty motion sensor or an issue with the photocell. Ensure there is no continuous motion in the detection area and that the light is not exposed to constant ambient light that might prevent the photocell from registering darkness.
Safety Information
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Always follow basic safety precautions when using electrical products. Do not submerge the unit in water. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Warranty and Support
All Mr. Beams products are guaranteed against defects in workmanship and materials for 1 year from the date of purchase. For detailed terms and conditions, please refer to the official Mr. Beams website or the documentation included with your product.
For additional support and information, visit the Mr. Beams product support page. A link to this page can typically be found on the product packaging or the official Mr. Beams website.
