Wireless Motion Sensor LED Ceiling Light
Light Sensor Removal Instructions
MB980
Important:
Before you begin, these instructions are for customers who find there is ambient light in the desired location that prevents their light from activating. Once the sensor is removed, your light will activate, regardless of surrounding lights. Battery life will decrease once the sensor is removed, because light will activate more often. Please note that once the sensor is removed, your warranty is void. We appreciate your interest in our products and are more than happy to help you customize your light for your specific need. Please call or email any questions to our customer service.
Phone: 1 (877) 298-9082 Email: info@mrbeams.com
Instructions:
-
Remove mounting bracket from back of light. Remove back plate by removing thumb screw.
[Diagram: Shows detaching the mounting bracket and removing a thumb screw from the back plate.]
-
Pull out battery compartment by squeezing the clips with finger (or pliers) to pull it out of the cover.
[Diagram: Illustrates pulling out the battery compartment by squeezing clips.]
-
The light sensor is a round component with a bent red line on the top. The light sensor can be removed with needle nose pliers, gently twisting until it detaches from unit.
[Diagram: Shows removing the light sensor using needle-nose pliers with a gentle twisting motion.]
-
Replace battery compartment until it clicks securely into clips. See your user manual for installation instructions.
[Diagram: Depicts reinserting the battery compartment until it clicks into place.]
MR BEAMS™
Surprisingly Bright Light Anywhere
www.mrbeams.com
[CE Certification Mark]
32333 Aurora Rd. Suite 100 Solon, OH 44139
877.298.9082
