Introduction
The Philips Avent SCF355/00 Bottle and Baby Food Warmer provides a safe and convenient method for preparing your baby's meals. Designed for ease of use, it gently heats bottles and baby food, ensuring even warming without creating hot spots. Its compact design allows for easy placement on kitchen countertops or bedside tables, making nighttime feedings simpler. This warmer is compatible with all Philips Avent bottles, toddler cups, and most food jars.
The Philips Avent Baby Bottle Warmer, a compact and efficient device for warming baby bottles and food.
Important Safety Information
Please read all instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the appliance is placed on a stable, level, and heat-resistant surface.
- Do not immerse the cord, plug, or the appliance itself in water or other liquids.
- Unplug the appliance from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Always test the temperature of the warmed milk or food before feeding your baby to prevent scalding. The warmer heats evenly, but a quick check is always recommended.
- Keep out of reach of children. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Features
- Gentle and Even Heating: Circulates milk during warming to prevent hot spots.
- Versatile Compatibility: Works with all Philips Avent bottles, toddler cups, and most food jars.
- Fast Warming: Heats 4 ounces of milk in approximately 3 minutes.
- Convenient Defrost Setting: Safely defrosts breast milk and baby food.
- Compact Design: Easily fits on a counter or nightstand.
- Power Consumption: 300 Watts.
Diagram illustrating the gentle and even heating circulation within the warmer.
The warmer's wide opening accommodates various bottle brands and baby food jars.
Setup
- Place the bottle warmer on a stable, flat surface.
- Plug the power cord into a suitable electrical outlet.
- Ensure the unit is clean before first use (refer to Maintenance section).
The Philips Avent Bottle Warmer in use, demonstrating its compact size and ease of access.
Operating Instructions
The Philips Avent Bottle Warmer is designed for simple operation. Follow these steps for optimal warming:
- Place the bottle or food jar into the warmer.
- Fill the warmer with water up to the level of the milk or food in the bottle/jar. Do not overfill.
- Turn the dial to the desired setting:
- Defrost Setting: For gently thawing frozen milk or food.
- Warming Settings: Select based on the volume of milk/food (e.g., half bottle, full bottle).
- A neon light will illuminate, indicating the unit is on and working.
- Refer to the "Warming Reference Table" below for recommended heating times.
- Once the contents are warmed, a light may blink to indicate readiness. Remove the bottle/jar immediately.
- Important: Always shake the bottle gently and test the temperature of the milk or food on the inside of your wrist before feeding your baby.
Warming Reference Table
This table provides approximate warming times. Actual times may vary based on initial temperature, volume, and bottle material. Always test temperature before feeding.
| Milk content | 20°C | 5°C | Frozen |
|---|---|---|---|
| 60-90ml/2-3oz | 3 min | 4.5 min | 1-1.5 hrs |
| 90-110ml/3-4oz | 3 min | 5.5 min | - |
| 125-150ml/4-5oz | 3 min | 3.5 min | - |
| 180-210ml/6-7oz | 4 min | 5.5 min | 1.5-2.5 hrs |
| 240-260ml/8-9oz | 4.5 min | 7 min | - |
| 290-330ml/10-11oz | 5 min | 7.5 min | - |
Reference table for recommended warming times based on milk volume and initial temperature.
Maintenance and Cleaning
Proper maintenance ensures the longevity and hygiene of your bottle warmer.
- Before Cleaning: Always unplug the appliance and allow it to cool down completely.
- Cleaning the Exterior: Wipe the exterior with a damp cloth. Do not use abrasive cleaning agents or harsh chemicals.
- Cleaning the Interior: The interior of the warming chamber can be cleaned with a soft, damp cloth. For stubborn residue, a mild dish soap solution can be used, followed by thorough rinsing with a clean damp cloth.
- Descaling: Over time, mineral deposits (limescale) may build up in the warming chamber, especially in areas with hard water. To descale, mix 50ml of white vinegar with 100ml of cold water. Pour the solution into the warmer and let it stand for 30 minutes. Do not turn on the warmer. Empty the warmer and rinse thoroughly with clean water. Repeat if necessary.
- Do NOT Dishwash: This appliance is not dishwasher safe.
Troubleshooting
If you encounter issues with your Philips Avent Bottle Warmer, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Warmer does not turn on. | Not plugged in; power outlet issue; unit malfunction. | Ensure the power cord is securely plugged into a working outlet. Check the on/off switch. If problem persists, contact customer support. |
| Milk/food is not warm enough. | Insufficient warming time; too little water in chamber; incorrect setting. | Increase warming time according to the reference table. Ensure water level reaches the milk level. Select the appropriate setting for the volume. |
| Milk/food is too hot. | Excessive warming time; too much water in chamber; incorrect setting. | Reduce warming time. Ensure water level is appropriate. Select the correct setting. Always test temperature before feeding. |
| White residue (limescale) inside. | Mineral buildup from water. | Descale the unit as described in the "Maintenance and Cleaning" section. |
Specifications
- Model Number: SCF355/06
- Product Dimensions: 5.85 x 6.31 x 5.5 inches
- Item Weight: 1.55 pounds
- Material Type: BPA Free, Latex Free, Lead Free, Phthalate Free
- Power Consumption: 300 Watts
- Target Gender: Unisex
- Dishwasher Safe: No
- Portable: No
Visual representation of the product dimensions.
Warranty and Support
For detailed warranty information and customer support, please refer to the official Philips Avent website or the user manual provided with your product. You can also find the user manual online:
For further assistance, please contact Philips Avent customer service.
