1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.
Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.
2. Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other injuries.
- Always disconnect power before installation or servicing.
- Do not install near heat sources or in wet locations. This product is designed for indoor use only.
- Ensure the mounting surface can support the weight of the fixture.
- Do not look directly into the LED light source when illuminated.
- Use only with 120V AC power supply.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
3. Package Contents
Verify that all components are present before beginning installation:
- Feit Electric LED Utility Shop Light Fixture (Model 917972)
- Two (2) 6-inch (15 cm) Hanging Cables
- Two (2) Mounting Screws for flush mount installation
4. Setup and Installation
The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.
4.1. Hanging Installation
- Identify the desired location for the shop light. Ensure it is near a power outlet.
- Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
- Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
- Plug the power cord into a standard 120V AC grounded outlet.
4.2. Flush Mount Installation
- Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
- Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
- Align the fixture's mounting holes with the pilot holes.
- Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
- Plug the power cord into a standard 120V AC grounded outlet.
5. Operating Instructions
The Feit Electric LED Utility Shop Light is designed for simple operation.
- Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
- To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
- The LED technology provides instant full brightness with no humming.
6. Maintenance
The Feit Electric LED Utility Shop Light requires minimal maintenance.
- Cleaning: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LEDs: The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
- Inspection: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Troubleshooting
If you experience issues with your shop light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the outlet; fixture not properly plugged in; faulty outlet or wall switch. | Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check the circuit breaker. Verify the wall switch is ON. |
| Light flickers or dims. | Loose connection; incompatible dimmer switch (this fixture is not dimmable); voltage fluctuations. | Ensure the plug is secure. Do not use with a dimmer switch. If flickering persists, consult an electrician. |
| Humming noise. | Not applicable for this LED fixture. | This LED fixture is designed for no humming. If humming occurs, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Feit Electric |
| Model Number | 917972 |
| Light Source Type | LED |
| Color Temperature | 4100 Kelvin (Cool White) |
| Wattage | 38 Watts |
| Light Output | 3700 Lumens |
| Life Hours | 50,000 Hours |
| Voltage | 120 Volts (AC) |
| Material | Copper, Metal (Fixture) |
| Product Dimensions | 47 x 6 x 3 inches |
| Item Weight | 2.1 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Installation Type | Flush Mount, Hanging |
9. Warranty and Support
Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.
Feit Electric Customer Service:
- Website: www.feit.com
- Phone: Refer to the official Feit Electric website for current contact numbers.
Please retain your purchase receipt as proof of purchase for warranty purposes.
