Banshee Deep Cycle Fast Charger User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation of your Banshee Deep Cycle Fast Charger, Model TE4-0232. This charger is designed for 12V lead-acid batteries, including GEL, AGM, and STD types, offering versatile charging and engine starting capabilities. Please read this manual thoroughly before operating the charger to ensure proper use and to prevent damage to the unit or battery.

2. Important Safety Information

WARNING: Read all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This charger is designed for use on LEAD ACID BATTERIES ONLY. It is not for use with lithium batteries. Using it with incompatible battery types can cause damage or injury.
• Ensure the charging area is well-ventilated.
• Avoid sparks, flames, and smoking near the battery or charger.
• Wear appropriate eye protection and protective clothing when working with batteries.
• The charger features reverse hook-up protection to help prevent damage if clamps are connected incorrectly. However, always double-check connections.
• Keep out of reach of children.

Important safety notice: This charger is exclusively for lead-acid batteries.

3. Product Features and Components

The Banshee Deep Cycle Fast Charger is equipped with features for efficient and safe battery charging:

• Multiple Charging Modes: 2 Amp (Trickle Charge), 10 Amp (Fast Charge), and 50 Amp (Engine Start).
• Reverse Hook-up Protection: Prevents damage from incorrect battery terminal connections.
• LED Indicators: For 'Power ON' and 'Fully Charged' status.
• Ammeter: Displays the current being drawn by the battery.
• Durable Design: Robust casing with a convenient carrying handle.

Component Overview

Figure 3.1: Front view of the charger showing the control panel and indicators.

Figure 3.2: Top view highlighting the integrated carrying handle for portability.

Figure 3.3: Side view showing the power cord and battery clamp cables.

Figure 3.4: Overhead view displaying the charger, power cord, and battery clamps.

Figure 3.5: Rear view of the charger unit.

Figure 3.6: Close-up of the AC power plug and the red (positive) and black (negative) battery clamps.

Control Panel Details

Figure 3.7: The control panel features a Battery Type Switch (SLI/Deep Cycle) and a Charge Rate Selector Switch (2A, 10A, 50A).

Figure 3.8: The Ammeter indicates the amount of current (amps) being drawn by the battery, showing charging and fully charged states.

4. Setup

1. Prepare the Battery: Ensure the battery terminals are clean and free of corrosion.
2. Connect Battery Clamps:
   • Connect the RED (positive, +) clamp to the positive battery terminal.
   • Connect the BLACK (negative, -) clamp to the negative battery terminal.
   • Ensure a secure connection.
3. Connect to Power: Plug the charger's AC power cord into a standard 120V AC electrical outlet. The 'Power ON' LED indicator should illuminate.

5. Operating Instructions

Selecting Charge Mode

The Banshee charger offers three charging modes:

Figure 5.1: Overview of the three charging modes and their applications.

• 2 Amp (Slow Charge): Intended for charging small batteries such as those commonly used in garden tractors, snowmobiles, and motorcycles.
• 10 Amp (Fast Charge): Use for charging automotive, marine, and deep-cycle batteries. Not intended for industrial applications.
• 50 Amp (Engine Start): Provides additional amps for cranking an engine with a weak or run-down battery. Always use in combination with a battery.

Use the Charge Rate Selector Switch on the control panel to choose the desired amperage.

Battery Type Selection

Use the Battery Type Switch on the control panel to select between SLI (Starting, Lighting, Ignition) and Deep Cycle battery types for optimized charging.

Monitoring Charging Progress

• The Ammeter will show the current flowing into the battery. As the battery charges, the amperage will gradually decrease.
• The 'Full Charge' LED indicator will illuminate when the battery has reached a full charge. The charger will then automatically switch to a maintenance (float) mode to prevent overcharging.

Operational Demonstration Video

6. Maintenance

• Cleaning: Disconnect the charger from power and the battery before cleaning. Wipe the casing with a dry cloth. Do not use harsh chemicals or abrasives.
• Storage: Store the charger in a cool, dry place when not in use. Ensure cables are neatly coiled and not kinked.
• Cable Inspection: Periodically inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Do not use the charger if cables are damaged.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the product packaging or contact Banshee customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.