Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your American Standard 7262S Marquette Shower Faucet. Please read these instructions thoroughly before beginning installation or use to ensure safe and efficient operation.
The American Standard 7262S Marquette Shower Faucet features a cast brass body and a washerless ceramic disc valve cartridge. It is designed to maintain a constant output temperature in response to changes in hot and cold supply pressure, enhancing user comfort and safety.
Setup and Installation
Installation of this shower faucet should ideally be performed by a qualified professional plumber to ensure compliance with local codes and proper functionality.
- Rough-in Plaster Guard: The unit includes a rough-in plaster guard, which is designed for use as a thin-wall mounting adapter.
- Connections: The faucet utilizes 1/2 inch female IPS inlets and outlets for water supply connections.
- Pressure Balancing: The integrated pressure balancing valve maintains a consistent output temperature, responding to fluctuations in hot and cold water supply pressure.
- Hot Limit Safety Stop: An adjustable hot limit safety stop is included to reduce the risk of accidental scalding. This feature should be set during installation according to user preference and safety guidelines.
- Construction: The durable solid brass construction is designed for prolonged contact with water, ensuring longevity.
- Mounting: This is a wall-mount installation, typically as part of a shower trim kit.
Figure 1: American Standard 7262S Marquette Shower Faucet. This image shows the American Standard 7262S Marquette Shower Faucet, featuring a single handle design and a showerhead. The finish appears to be white or a light neutral color.
Operating Instructions
The Marquette shower faucet is designed for simple and intuitive operation.
- Turning On/Off: Rotate the single handle to turn the water flow on or off.
- Temperature Control: The handle cycles from off to hot through cold. Rotate the handle to adjust the water temperature to your desired setting. The ceramic disc valve cartridge ensures smooth operation.
- Flow Rate: The showerhead is equipped with an easy-clean design and a 2.5 gallons per minute (gpm) flow restrictor to conserve water while providing adequate pressure.
Maintenance
Regular cleaning and maintenance will help preserve the appearance and functionality of your faucet.
- Cleaning the Finish: Use a soft, damp cloth and mild soap to clean the faucet's exterior. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Showerhead Cleaning: The showerhead features an easy-clean design. Periodically wipe the spray nozzles to remove mineral deposits and maintain optimal spray performance.
- Valve Cartridge: The washerless ceramic disc valve cartridge is designed for long-term, drip-free performance. If issues arise with water flow or temperature control, the cartridge may need inspection or replacement by a qualified professional.
Troubleshooting
If you encounter issues with your American Standard 7262S Marquette Shower Faucet, consider the following common solutions:
- No Water Flow or Low Pressure:
- Check if the main water supply to the shower is fully open.
- Inspect the showerhead for clogs or mineral buildup. Clean as described in the Maintenance section.
- Ensure no other water fixtures are running simultaneously, which could reduce pressure.
- Inconsistent Water Temperature:
- Verify that the hot and cold water supplies are fully open.
- The pressure balancing cartridge is designed to prevent sudden temperature changes. If this feature is not working, the cartridge may be faulty or require professional inspection.
- Check the setting of the hot limit safety stop; it might be set too low.
- Leaking Faucet:
- A persistent drip usually indicates an issue with the valve cartridge. Replacement of the ceramic disc valve cartridge may be necessary.
- Ensure all connections are tight, but do not overtighten.
For issues not resolved by these steps, or if you suspect a problem with internal components like the valve cartridge or pressure balancing unit, it is recommended to contact a qualified plumber or American Standard customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | American Standard |
| Model Number | 7262S |
| Material | Brass |
| Finish Type | Painted |
| Color | White |
| Number of Handles | 1 (Single-handle temperature control) |
| Mounting Type | Wall Mount |
| Included Components | Showerhead Valve |
| UPC | 012611502446 |
| Item Weight | 4.79 pounds |
| Product Dimensions | 6.75 x 6.75 x 10.7 inches |
| Installation Method | Shower Trim Kit |
| Flow Rate | 2.5 gpm (gallons per minute) |
Warranty Information
American Standard products are backed by a warranty. For specific details regarding the warranty coverage for your 7262S Marquette Shower Faucet, please refer to the warranty documentation included with your purchase or visit the official American Standard website. Keep your proof of purchase for warranty claims.
Customer Support
If you require further assistance, have questions about installation, operation, or need to troubleshoot an issue not covered in this manual, please contact American Standard customer support. You can typically find contact information on the product packaging or on the official American Standard website.
Online Resources: Visit the American Standard Store on Amazon for additional product information and support.
