Reality Leuchten R40122001 Paper Floor Lamp Instruction Manual

Introduction

Thank you for purchasing the Reality Leuchten R40122001 Paper Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.

Important Safety Instructions

• Indoor Use Only: This lamp is designed exclusively for indoor use. Do not expose it to moisture or outdoor elements.
• Electrical Safety: Ensure the power supply voltage matches the lamp's requirements (230 Volts). Always unplug the lamp from the power outlet before cleaning, changing bulbs, or performing any maintenance.
• Bulb Type and Wattage: Use only E27 base bulbs. Do not exceed the maximum wattage of 60 Watts per bulb. Using higher wattage bulbs can cause overheating and fire hazards.
• Fragile Material: The lamp shade is made of paper. Handle with care to prevent tearing or damage. Keep away from open flames and heat sources.
• Assembly: Follow all assembly instructions carefully. Ensure all connections are secure before plugging in the lamp.
• Placement: Place the lamp on a stable, level surface to prevent tipping. Keep away from children and pets.
• Cleaning: Use a dry, soft cloth for cleaning. Do not use liquid cleaners or abrasive materials.

Package Contents

Please check that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.

• Lamp Frame (Base and vertical supports)
• Paper Lamp Shade
• Lamp Holder with E27 Socket
• Power Cord with Push Button Switch
• Assembly Hardware (screws, nuts, etc., if applicable)
• Note: Light bulbs are not included and must be purchased separately.

Assembly Instructions

Follow these steps to assemble your Reality Leuchten R40122001 Paper Floor Lamp. It is recommended to assemble the lamp on a soft, clean surface to prevent scratches.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out and identify each component.
2. Assemble the Lamp Frame:
   • Attach the vertical support rods to the lamp base using the provided hardware. Ensure they are securely fastened.
   • Connect any upper frame sections if your model requires it, ensuring all parts align correctly.

   

3. Install the Lamp Holder:
   • Carefully feed the power cord through the lamp frame.
   • Secure the E27 lamp holder to the top section of the lamp frame according to the design. Ensure it is firmly attached and the wiring is not pinched.
4. Attach the Paper Lamp Shade:
   • Gently unfold the paper lamp shade. Be careful as the paper material is delicate.
   • Position the shade around the lamp frame, securing it at the top and bottom as designed. This typically involves attaching it to designated clips or rings on the frame.

   

5. Insert Light Bulbs:
   • Screw two E27 light bulbs (not included) into the lamp holders. Ensure they are securely tightened but do not overtighten.
   • Verify that the bulbs do not exceed the maximum wattage of 60 Watts each.
6. Final Placement: Place the assembled lamp in its desired location, ensuring it is stable and the power cord is not a tripping hazard.

Operating Instructions

1. Connect to Power: Plug the lamp's power cord into a standard 230 Volt electrical outlet.
2. Turn On/Off: The lamp is equipped with a push-button switch on the power cord. Press the switch to turn the lamp on or off.

Maintenance

• Cleaning: Always unplug the lamp before cleaning. Use a dry, soft, lint-free cloth to gently wipe the lamp frame and shade. Do not use water, cleaning sprays, or abrasive materials, as these can damage the paper shade and electrical components.
• Bulb Replacement:
  1. Unplug the lamp from the power outlet.
  2. Allow the old bulb to cool completely before touching it.
  3. Carefully unscrew the old E27 bulb from the socket.
  4. Screw in a new E27 bulb, ensuring it does not exceed 60 Watts.
  5. Plug the lamp back in and test its operation.
• Shade Care: The paper shade is delicate. Avoid touching it unnecessarily to prevent marks or tears. Keep it away from direct sunlight to prevent discoloration over time.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. Keep your proof of purchase for any warranty claims.