Introduction
This manual provides essential information for the installation, operation, and maintenance of your Thrustmaster T3PA Add-On pedal set. Designed for an immersive racing experience, these pedals offer robust construction and customizable settings to enhance your simulation setup.
The Thrustmaster T3PA Add-On is compatible with PS5, PS4, XBOX Series X/S, One, and PC, integrating seamlessly into the Thrustmaster TX Racing Wheel Ecosystem.
What's in the Box
- Instructions manual
- Racing pedals (Thrustmaster T3PA Add-On)
Setup
1. Connecting the Pedal Set
The T3PA Add-On pedal set connects directly to your compatible Thrustmaster racing wheel base via the dedicated RJ25 connector. Ensure the connection is secure before use.
Image: The Thrustmaster T3PA Add-On pedal set, showing the three pedals (accelerator, brake, clutch) and the base unit. This is the primary product image.
2. Adjusting Pedal Spacing and Angle
The three pedals offer adjustable spacing (3 positions) and angle settings (2 positions) to suit your driving style. Refer to the detailed diagrams in the full user manual for specific adjustment procedures.
3. Accelerator Pedal Height Adjustment
The accelerator pedal features two height settings for optimal comfort and control. Adjust as needed for your preferred foot position.
4. Conical Rubber Brake Mod Installation
An optional Conical Rubber Brake Mod is included to provide realistic resistance at the end of the brake pedal's travel. This mod is made from industrial-grade high-density rubber and is fitted directly beneath the brake pedal. Its resistance is adjustable to your preference, ranging from approximately 33-55 lbs.
Image: The Thrustmaster T3PA Add-On pedal set shown alongside its product packaging, highlighting the complete retail package.
5. Mounting Options
The pedal set features a wide, textured footrest and a weighted base for stability. Built-in threaded holes are provided for secure mounting in cockpit setups.
Operating the T3PA Add-On Pedals
The T3PA Add-On pedal set is designed to provide precise and realistic control for racing simulations. Each pedal has individual pressure settings:
- Accelerator Pedal: Approximately 5.5 lbs.
- Brake Pedal: Approximately 22 lbs. without the Conical Rubber Brake Mod. With the mod, resistance is adjustable from 33-55 lbs.
- Clutch Pedal: Approximately 11 lbs.
Ensure your racing wheel's drivers are up to date for optimal performance and calibration of the pedal set.
Maintenance
To ensure the longevity and optimal performance of your Thrustmaster T3PA Add-On pedal set, follow these general maintenance guidelines:
- Keep the pedal set clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the unit to extreme temperatures or humidity.
- Regularly check all connections to ensure they are secure.
- Do not attempt to disassemble the unit beyond the specified adjustment points, as this may void your warranty.
Troubleshooting
If you encounter issues with your T3PA Add-On pedal set, consider the following:
- No Pedal Response: Ensure the pedal set is securely connected to your racing wheel base. Verify that the racing wheel base itself is properly connected to your console or PC and powered on.
- Incorrect Pedal Calibration: Refer to your racing wheel's user manual or Thrustmaster's official support website for instructions on calibrating the pedal set. Driver updates may also resolve calibration issues.
- Unusual Resistance/Feel: Check the Conical Rubber Brake Mod for proper installation if you are experiencing unexpected resistance on the brake pedal. Ensure no foreign objects are obstructing pedal movement.
- Compatibility Issues: Confirm that your racing wheel base is compatible with the T3PA Add-On pedal set. This pedal set is part of the TX Racing Wheel Ecosystem and is also compatible with the Ferrari 458 Spider Racing Wheel.
For further assistance, please visit the official Thrustmaster support website or consult the full user manual.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 4060056 |
| Product Dimensions | 13.62 x 21.42 x 15.83 inches |
| Item Weight | 2.2 pounds |
| Material | 100% metal pedals and internal structure |
| Pedal Adjustments | Adjustable spacing (3 positions), angle (2 positions), accelerator height (2 positions) |
| Brake Mod | Includes optional Conical Rubber Brake Mod |
| Compatibility | TX Racing Wheel Ecosystem, Ferrari 458 Spider Racing Wheel (PS5, PS4, XBOX Series X/S, One, PC) |
Warranty Information
For detailed warranty terms and conditions, please refer to the official warranty document provided by Thrustmaster. A copy of the warranty information can typically be found on the manufacturer's website or within the product packaging.
You can access the Warranty PDF here.
Support
For comprehensive support, including detailed setup guides, driver downloads, and frequently asked questions, please visit the official Thrustmaster support website.
You can download the full User Manual (PDF) here.
Visit the Thrustmaster Store for more products and accessories.
