1. Product Overview
The Moen 179101 Diverter Tub Spout is a high-quality replacement or new installation component designed for bathtubs. Featuring a durable chrome finish and traditional style, this spout includes an integrated diverter mechanism to easily switch water flow between the tub spout and a showerhead. It is engineered for reliable performance and seamless integration into your bathroom's plumbing system.
Figure 1.1: Front view of the Moen 179101 Diverter Tub Spout in Chrome finish.
2. Safety Information
Please read all instructions carefully before beginning installation. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before attempting any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves.
- If you are unsure about any step, consult a qualified plumber.
- Ensure all connections are secure and leak-free before restoring water supply.
3. Package Contents
Verify that all components are present before beginning installation:
- Moen 179101 Diverter Tub Spout (1 piece)
- Installation Hardware (may vary based on connection type)
Figure 3.1: Side view of the Moen 179101 Diverter Tub Spout, showing the diverter knob.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | 179101 |
| Brand | Moen |
| Finish Type | Chrome |
| Material | Zinc |
| Mounting Type | Deck Mount (for tub) |
| Installation Type | Single Hole |
| Product Dimensions | Approximately 6 x 3 x 3 inches |
| Item Weight | 1 Pound |
| UPC | 026508229798 |
Figure 4.1: Dimensional drawing of the Moen 179101 Diverter Tub Spout.
5. Installation Guide
This section provides general instructions for installing a diverter tub spout. Specific steps may vary based on your existing plumbing configuration (threaded or slip-on connection).
Tools Required:
- Adjustable Wrench or Pipe Wrench
- Screwdriver (Phillips or Flathead, depending on set screw type)
- Plumber's Tape (PTFE tape)
- Rag or Towel
Preparation:
- Turn off the main water supply to your home.
- Drain any remaining water from the pipes by opening a faucet.
- Place a rag or towel in the tub to protect the finish and catch any small parts.
Removing the Old Tub Spout:
- For Threaded Spouts: Unscrew the old spout counter-clockwise from the pipe extending from the wall. You may need a pipe wrench for stubborn spouts.
- For Slip-On Spouts: Locate the set screw on the underside of the spout, near the wall. Loosen or remove this screw with a screwdriver. Pull the spout straight off the pipe.
- Clean any old caulk or debris from the wall around the pipe.
Installing the New Moen 179101 Spout:
- For Threaded Connections:
- Apply plumber's tape clockwise around the threads of the pipe extending from the wall.
- Thread the new Moen 179101 spout onto the pipe by turning it clockwise. Hand-tighten first, then use an adjustable wrench to tighten until snug and facing downwards. Do not overtighten.
- For Slip-On Connections:
- Slide the new Moen 179101 spout onto the pipe, ensuring it is fully seated against the wall.
- Tighten the set screw on the underside of the spout until it is secure. Do not overtighten.
- Apply a bead of silicone caulk around the base of the spout where it meets the wall to prevent water from seeping behind the wall.
Post-Installation:
- Slowly turn the main water supply back on.
- Check for any leaks around the spout connection. If leaks are present, tighten connections or reapply plumber's tape as needed.
- Test the diverter function.
6. Operation
The Moen 179101 Diverter Tub Spout features a simple pull-up diverter knob to control water flow.
- To fill the tub: Ensure the diverter knob is in the down position. Water will flow directly from the tub spout.
- To use the shower: Pull the diverter knob upwards. This will redirect water flow from the tub spout to your showerhead.
- To return to tub flow: Push the diverter knob back down. The diverter may automatically disengage when water pressure is reduced or turned off.
7. Maintenance & Care
To maintain the beautiful chrome finish and ensure the longevity of your Moen tub spout, follow these care instructions:
- Clean regularly with a soft, damp cloth.
- For stubborn spots, use a mild soap and water solution. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Do NOT use abrasive cleaners, harsh chemicals, ammonia-based cleaners, or scouring pads, as these can damage the finish.
- Avoid leaving cleaning products on the surface for extended periods.
8. Troubleshooting
If you encounter issues with your Moen 179101 Diverter Tub Spout, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leaks from the base of the spout. | Improperly sealed connection or loose fit. | Ensure the spout is fully seated and the set screw (for slip-on) or threads (for threaded) are tight. Reapply plumber's tape if necessary for threaded connections. Re-caulk the base. |
| Diverter knob is stiff or difficult to pull. | Mineral buildup or internal wear. | Clean the diverter mechanism if accessible. If problem persists, replacement may be needed. |
| Water continues to flow from the tub spout when diverter is engaged. | Diverter mechanism is faulty or obstructed. | Check for debris in the diverter. If the diverter is worn, the spout may need to be replaced. |
| Low water flow from the spout. | Obstruction in the pipe or spout. | Check for debris in the spout's opening. Ensure main water supply is fully open. |
If these solutions do not resolve the issue, please contact Moen Customer Support.
9. Warranty Information
Moen products are manufactured under the highest standards of quality and workmanship. The Moen 179101 Diverter Tub Spout is backed by Moen's Limited Lifetime Warranty against leaks, drips, and finish defects to the original consumer purchaser.
For complete warranty details and terms, please refer to the official Moen warranty documentation or visit the Moen website.
10. Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Moen Customer Service:
- Website: Visit the official Moen website for FAQs, product registration, and contact information. www.moen.com
- Phone: Refer to the Moen website for regional customer service phone numbers.
When contacting support, please have your product model number (179101) and purchase date available.
