EZ-FLO Two-Handle Wall Mount Faucet User Manual
Model: 10153
Product Overview
The EZ-FLO Two-Handle Wall-Mount Faucet, Model 10153, is designed for bathroom use, offering a modern aesthetic with its chrome finish. Constructed from durable solid brass, it features a 6-inch spout and two handles for precise water control. Its adjustable centers facilitate straightforward installation.
Image: EZ-FLO Two-Handle Wall Mount Faucet, showcasing its chrome finish and wall-mount design.
Installation Instructions
Before You Begin
- Ensure water supply is turned off at the main shut-off valve.
- Clear the installation area of any obstructions.
- Gather necessary tools: adjustable wrench, pipe sealant/Teflon tape, screwdriver.
Mounting the Faucet
- Position the faucet body against the wall, aligning with the pre-drilled holes. The faucet is adjustable with centers from 6-1/2 inches to 9-1/2 inches to accommodate various installations.
- Secure the faucet to the wall using appropriate mounting hardware.
- Apply pipe sealant or Teflon tape to the threaded connections of the water supply lines.
- Connect the hot and cold water supply lines to the corresponding inlets on the faucet body. Tighten connections securely with an adjustable wrench, being careful not to overtighten.
- Ensure all connections are tight to prevent leaks.
Operating Instructions
The EZ-FLO Two-Handle Wall Mount Faucet features separate handles for hot and cold water control.
- To turn on the cold water, rotate the cold water handle (typically on the right) counter-clockwise.
- To turn on the hot water, rotate the hot water handle (typically on the left) counter-clockwise.
- Adjust the water temperature by blending the hot and cold water flow using both handles.
- To turn off the water, rotate the handles clockwise until the water flow stops completely.
Maintenance and Care
Regular maintenance will help preserve the finish and functionality of your EZ-FLO faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
- Leak Prevention: The faucet is equipped with replaceable brass seats and stems designed to prevent leaks. If a leak occurs, these components may need inspection or replacement. Consult a qualified plumber if you are unsure.
- Aerator Maintenance: Periodically unscrew the aerator from the spout and clean any mineral deposits or debris that may have accumulated. Rinse thoroughly and reattach.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or partially closed shut-off valve. | Clean the aerator. Ensure water supply valves are fully open. |
| Faucet Leaks | Worn out brass seats or stems, loose connections. | Tighten connections. Inspect and replace brass seats/stems if necessary. |
| Water Temperature Issues | Incorrect hot/cold supply connections or issues with water heater. | Verify hot and cold lines are connected correctly. Check water heater settings. |
Specifications
- Model: 10153
- Brand: EZ-FLO
- Mounting Type: Wall Mount
- Finish: Chrome
- Material: Brass
- Number of Handles: 2
- Spout Height: 6 Inches
- Spout Reach: 6 Inches
- Adjustable Centers: 6-1/2 inch to 9-1/2 inch
- Product Dimensions: 2.3"D x 3.7"W x 10.5"H
- Item Weight: 2.3 pounds
- Special Feature: Leak Resistant (due to replaceable brass seats and stems)
Warranty Information
The EZ-FLO Two-Handle Wall Mount Faucet includes a limited 1-year warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use. For warranty claims or further details, please refer to the official EZ-FLO warranty policy or contact customer support.
Customer Support
For technical assistance, replacement parts, or any inquiries regarding your EZ-FLO faucet, please visit the official EZ-FLO store or contact their customer service department. You can find more information and support resources by visiting the EZ-FLO Store on Amazon.
