1. Important Safety Information
Please read all instructions carefully before using your Ozeri ZB19 Rev Digital Bathroom Scale. Failure to follow these instructions may result in injury or damage to the scale.
- Always place the scale on a hard, flat, and stable surface. Using it on carpet or uneven surfaces may affect accuracy.
- Do not use the scale on wet or slippery floors. Ensure your feet and the scale surface are dry to prevent slipping.
- The maximum weight capacity for this scale is 180 kg (400 lbs). Do not exceed this limit.
- This scale is intended for personal use only and is not for medical diagnosis or treatment.
- Keep the scale away from extreme temperatures, direct sunlight, and high humidity.
- Do not disassemble or attempt to repair the scale yourself. This will void the warranty.
- Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
2. Package Contents
- 1 x Ozeri ZB19 Rev Digital Bathroom Scale
- 3 x AAA Batteries (pre-installed or included)
- 1 x User Manual (this document)
3. Setup
-
3.1 Unpacking and Battery Activation
Carefully remove the scale from its packaging. Locate the battery compartment on the underside of the scale. If there is a plastic insulation strip, gently pull it out to activate the pre-installed batteries. If batteries are not pre-installed, insert 3 AAA batteries, ensuring correct polarity (+/-).
Figure 1: Top view of the Ozeri ZB19 Rev Digital Bathroom Scale.
-
3.2 Placement
Place the scale on a hard, flat, and stable surface, such as tile or hardwood flooring. Avoid placing it on carpets, rugs, or uneven surfaces, as this can lead to inaccurate readings.
Figure 2: Side profile of the scale, illustrating its slim design.
-
3.3 Unit Selection (KG/LB)
On the underside of the scale, locate the unit conversion button (usually labeled "UNIT" or "KG/LB"). Press this button to toggle between kilograms (KG) and pounds (LB) according to your preference. Ensure the desired unit is selected before weighing.
4. Operating Instructions
-
4.1 Initializing the Scale
Before first use or after moving the scale, it is recommended to initialize it. Gently step onto the scale, then immediately step off. The display will show "0.0" or a similar reading and then turn off. This calibrates the scale for accurate measurement.
-
4.2 Taking a Measurement
Step onto the scale with bare feet, standing still and centered on the platform. The scale will automatically turn on and display your weight on both the electro-mechanical dial and the backlit digital LCD. Remain still until the weight reading stabilizes.
Figure 3: Close-up view of the dual display, showing both the analog dial and digital weight reading.
-
4.3 Auto-Off Function
To conserve battery life, the scale will automatically turn off after approximately 10-15 seconds of inactivity.
-
4.4 Daily Reminder Alarm (Optional)
Some models may include a daily reminder alarm function. Locate the alarm button on the underside of the scale. Press it to activate or deactivate the daily reminder. Refer to the specific markings on your scale for detailed instructions on setting the alarm time, if applicable.
5. Maintenance and Care
-
5.1 Cleaning
Wipe the scale surface with a slightly damp cloth and mild detergent if necessary. Do not use abrasive cleaners or immerse the scale in water. Dry thoroughly after cleaning.
-
5.2 Storage
Store the scale in a cool, dry place. Avoid storing it vertically or with heavy objects on top, as this may affect its accuracy over time.
-
5.3 Battery Replacement
If the display shows "Lo" or becomes dim, it's time to replace the batteries. Open the battery compartment on the underside of the scale and replace the 3 AAA batteries with new ones, observing correct polarity. Dispose of old batteries responsibly.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Lo" displayed | Low battery power. | Replace the 3 AAA batteries. |
| "Err" displayed | Overload or unstable reading. | The maximum weight capacity (180 kg / 400 lbs) has been exceeded. Step off the scale. Ensure the scale is on a flat, stable surface. |
| Inaccurate readings | Scale not initialized, on an uneven surface, or moved recently. | Ensure the scale is on a hard, flat surface. Step on and off the scale quickly to re-initialize it before taking a measurement. Ensure the unit (KG/LB) is correctly selected. |
| No display | Batteries are dead or not inserted correctly. | Check battery polarity. Replace batteries if necessary. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | ZB19 |
| Weight Capacity | 180 kg / 400 lbs |
| Weight Increments | 0.1 kg / 0.2 lb |
| Power Source | 3 x AAA Batteries (included) |
| Display | Electro-mechanical dial and Backlit LCD |
| Product Dimensions (LxWxH) | 34.29 x 35.56 x 2.54 cm (13.5 x 14 x 1 inches) |
| Item Weight | 1.68 kg (3.7 lbs) |
Figure 4: Product dimensions of the Ozeri ZB19 Rev scale.
8. Warranty and Support
Ozeri products are manufactured to the highest quality standards. For information regarding warranty coverage, product support, or to register your product, please visit the official Ozeri website or contact their customer service department. Keep your purchase receipt as proof of purchase.
For the most up-to-date support information, please visit: www.ozeri.com
