BLACK+DECKER BL1130SG FusionBlade Blender User Manual

Introduction

This manual provides important information for the safe and efficient operation of your BLACK+DECKER BL1130SG FusionBlade Blender. Please read all instructions thoroughly before using the appliance and retain this manual for future reference.

The BLACK+DECKER FusionBlade Blender is designed for various blending tasks, from mixing and chopping to blending and pureeing, utilizing advanced blade technology and innovative jar geometry.

Figure 1: Front view of the BLACK+DECKER BL1130SG FusionBlade Blender.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury, including the following:

• Read all instructions.
• To protect against electrical shock, do not immerse cord, plugs, or appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter.
• Do not let cord contact hot surface, including the stove.
• Keep hands and utensils out of container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
• Always operate blender with lid in place.
• Do not blend hot liquids.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

Parts and Features

Familiarize yourself with the components of your blender before operation.

1. Lid
2. Lid insert/Measuring cup
3. 6-Cup Glass Jar
4. FusionBlade™ Assembly (Blade)
5. Jar Base
6. Blender Base (Motor Unit)
7. Control Panel with 12 Speeds and Pulse Function

Figure 2: The 6-cup glass jar and lid components.

Figure 3: Side view of the blender, showing the overall assembly.

Setup and Assembly

Before first use, wash all parts as instructed in the "Care and Cleaning" section. Ensure the blender is unplugged before assembly.

1. Place the glass jar upside down on a flat surface.
2. Place the FusionBlade™ assembly into the opening at the bottom of the jar, ensuring the blades are facing inside the jar.
3. Screw the jar base onto the jar by turning it clockwise until it is tight and secure.
4. Turn the assembled jar right side up.
5. Place the assembled jar onto the blender base, aligning the tabs on the jar base with the slots on the blender base. Rotate the jar clockwise until it locks into place.
6. Place the lid onto the glass jar and press down firmly. Insert the lid insert/measuring cup into the lid opening.

Operating Instructions

The BLACK+DECKER BL1130SG blender features 12 speeds and a pulse function for versatile blending. Always ensure the lid is securely in place before operating.

Figure 4: Close-up of the control panel with various speed and function buttons.

General Blending

1. Ensure the blender is assembled correctly and plugged into a standard electrical outlet.
2. Add ingredients to the glass jar. Do not fill past the maximum fill line (48 fluid ounces / 6 cups).
3. Securely place the lid and lid insert on the jar.
4. Select the desired speed setting by pressing the corresponding button on the control panel. The 12 speeds allow for precise control over blending consistency.
5. For short bursts of power, press and hold the "Pulse" button. Release to stop.
6. Once blending is complete, press the "Off" button and unplug the blender before removing the jar.

Recommended Uses for Speed Settings:

• Stir: For light mixing, combining ingredients.
• Mix: For batters, sauces, and light blending.
• Crumb: For making breadcrumbs or crushing dry ingredients.
• Chop: For chopping vegetables, nuts, or fruits.
• Whip: For whipping cream or aerating liquids.
• Clean: For easy cleaning (see Maintenance section).
• Ice Crush: Specifically designed for crushing ice cubes.
• Liquify: For making smooth purees, soups, and sauces.
• Blend: General blending for smoothies and shakes.
• Puree: For achieving very smooth consistencies.
• Grind: For grinding coffee beans or spices.
• Smoothie: Optimized setting for creating smooth beverages.

Caution: Do not blend hot liquids. Allow hot ingredients to cool before blending.

Maintenance and Cleaning

Proper cleaning and maintenance will ensure the longevity and optimal performance of your blender. Always unplug the appliance before cleaning.

Easy Cleaning (Quick Clean)

1. After use, empty the jar.
2. Fill the jar with 2 cups of warm water and a drop of dish soap.
3. Place the lid on the jar.
4. Place the jar on the blender base.
5. Press the "Clean" button and run for 30 seconds.
6. Empty the jar and rinse thoroughly with clean water.

Detailed Cleaning

• Blender Base: Wipe the blender base with a damp cloth and dry thoroughly. Do not immerse the blender base in water or any other liquid.
• Glass Jar, Lid, and Blade Assembly: All removable parts (glass jar, lid, lid insert, FusionBlade™ assembly, and jar base) are dishwasher-safe. For hand washing, wash in warm, soapy water, then rinse and dry thoroughly. Handle the blades with extreme care as they are sharp.

Warning: Blades are sharp. Exercise extreme caution when handling the blade assembly.

Troubleshooting

If your blender is not operating correctly, refer to the following common issues and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

• Model: BL1130SG
• Brand: BLACK+DECKER
• Capacity: 48 Fluid Ounces (6-Cup Glass Jar)
• Power Source: Corded Electric
• Motor Wattage: 550W
• Number of Speeds: 12 + Pulse
• Voltage: 240 Volts
• Controls Type: Push Button
• Blade Material: Stainless Steel
• Material Type Free: PFOA Free, Lead Free, BPA Free, PVC Free, PTFE Free, Phthalate Free
• Product Dimensions: 9 x 9.5 x 8 inches
• Item Weight: 7 pounds

Warranty and Customer Support

This BLACK+DECKER BL1130SG FusionBlade Blender comes with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the duration and coverage of the warranty.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BLACK+DECKER customer support. Contact information can typically be found on the product packaging or the official BLACK+DECKER website.

Online Support: Visit the official BLACK+DECKER website for FAQs, product registration, and additional support resources.