Introduction
This manual provides essential information for the safe and effective use of your Marcy Eclipse HG7000 Home Gym with Leg Press. Please read all instructions carefully before assembly and operation to ensure proper function and to prevent injury. Keep this manual for future reference.
The HG7000 is a versatile home gym system designed to provide a comprehensive full-body workout, featuring a unique integrated leg press system without requiring additional space.
Figure 1: Marcy Eclipse HG7000 Home Gym with Leg Press. This image shows the complete assembled home gym unit, highlighting its compact design and various stations.
Setup and Assembly
The Marcy Eclipse HG7000 Home Gym requires assembly. It is recommended that two people undertake the assembly process. The approximate self-assembly time is 6-8 hours. An assembly guide with illustrations and all necessary tools are included with your purchase.
Unpacking and Inspection:
- Carefully remove all components from the packaging.
- Verify all parts against the included parts list in the assembly guide.
- Report any missing or damaged parts immediately to customer support.
Packaging Details:
- Box 1: Length: 194cm x Width: 58cm x Height: 23cm (60.5kg / 133lbs)
- Box 2: Length: 194cm x Width: 58cm x Height: 23cm (60.5kg / 133lbs)
- Box 3: Length: 194cm x Width: 58cm x Height: 23cm (60.5kg / 133lbs)
- Box 4: Length: 194cm x Width: 58cm x Height: 23cm (60.5kg / 133lbs)
Safety Certification:
This gym has been manufactured to comply with the EN-957 global safety standards. The design has been tested for weight loading, pinch points, shear hazards, pull-in and trapping hazards, and similar hazards which can arise during use of fitness equipment.
Polite Notice: For safety reasons, no additional weight can be added on top of the provided weights as the gym has not been tested and rated to withstand above the provided amount.
Operating Instructions
The HG7000 Home Gym offers a wide range of exercises targeting all major muscle groups. Familiarize yourself with the various components and their adjustments before beginning your workout.
Key Product Features:
- Weight Stack: Includes a 72kg (158lb) solid vinyl weight stack with a selector pin. The stack consists of 10 weight plates, each weighing approximately 7.2kg (15.9lbs), allowing for small incremental weight increases. The pulley system generates up to 180kg (400lbs) of resistance.
- Leg Press System: Features 4 adjustable foot plate positions. The removable preacher curl arm pad can be flipped over to provide back support for the leg press.
- High Pulley System: Designed to accommodate interchangeable gym attachments, includes a lat bar holder.
- Low Pulley System: Also takes interchangeable gym attachments for a variety of exercises.
- Chest Press System: Equipped with multi-grip foam handles for both wide and neutral grip chest presses.
- Free Motion Pec Dec Arms: The chest press handles double as bio-mechanically friendly pec dec arms for flyes.
- Removable Preacher Curl Arm Pad: Offers 3 height adjustments.
- Leg Extension: Pivot point follows natural bio-mechanics to alleviate knee pressure. Features high-density foam roller pads with synthetic leather wrapping for comfort.
- Safety Weight Shroud: Protects the weight stack and secludes it.
- Clip on Chains: Used to adjust the length of gym attachments with quick release clips.
- Seat Pad: Fixed one position.
- Back Pad: Adjustable to 3 horizontal positions.
- Adjustable Cable Tension: Prevents slack on the cables for instant resistance.
Figure 2: Adjustable Backpad and Leg Press. This image illustrates the adjustability of the backpad to three horizontal positions and the leg press to four different lengths, enhancing user comfort and exercise versatility.
Figure 3: Leg Press in Use. A user demonstrates the leg press function, showcasing the ergonomic design and proper form for this exercise.
Figure 4: Weight Resistance Chart and Selector Pin. This image provides a visual guide to the weight resistance chart for various exercises and highlights the location of the weight selector pin for easy adjustment.
Figure 5: Lat Pulldown Exercise. A user demonstrates the lat pulldown exercise, illustrating the use of the high pulley system and the included lat pulldown bar.
Figure 6: Leg Extension/Curl Pads. A close-up view of the padded rollers used for leg extension and curl exercises, designed for comfort and proper biomechanics.
Exercise Capabilities:
- Chest: Flat Press, Pec Dec, Single-Arm Crossover
- Back: Lat Pulldown, Bent Over Row, Seated Row, Reverse Grip Row
- Shoulders: Lateral Raise, Front Raise, Rear Flyes, Shrugs, Upright Rows
- Biceps: Straight Arm Curls, High Cable Curls, Close Grip Reverse Pulldowns
- Triceps: Tricep Pushdowns, Single Handle Pulldowns, Tricep Extensions
- Legs: Leg Press, Leg Curls, Leg Extensions, Abductor Extensions, Adductor Extensions
- Abs: High pulley ab crunches, cable wood chops, oblique side bends
Gym Attachments Included:
- Curved swivelling lat pulldown bar with multi-position anti-slip grips
- Short swivelling angled straight bar with anti-slip grips
- Single d-handle with foam grip
- Ankle strap with Velcro adjustment
Maintenance
Regular maintenance is crucial for the longevity and safe operation of your home gym.
- Lubrication: Lubricate moving parts with WD-40 or light oil periodically to ensure smooth operation.
- Inspection: Inspect and tighten all parts before each use of the equipment. Pay close attention to bolts, nuts, cables, and pulleys.
- Cleaning: The equipment can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents, as they may damage the finish or upholstery.
Troubleshooting
This section addresses common issues you might encounter with your home gym. If you experience problems not listed here, please contact customer support.
- Issue: Cables feel rough or sticky during operation.
Solution: Check cables for fraying or damage. Ensure pulleys are clean and free of debris. Apply a light lubricant to the cables and pulley axles. - Issue: Excessive noise during exercise.
Solution: Inspect all bolts and nuts for tightness. Loose connections can cause rattling. Lubricate moving parts as per maintenance instructions. Check for any rubbing components. - Issue: Weight plates are not moving smoothly.
Solution: Ensure the guide rods are clean and free of dust or rust. Apply a silicone-based lubricant to the guide rods. Check that the weight selector pin is fully inserted and not bent. - Issue: Instability or wobbling of the gym.
Solution: Verify that the gym is placed on a flat, level surface. Adjust any leveling feet if present. Ensure all frame bolts are securely tightened.
Specifications
Dimensions and Weights:
- Maximum User Weight Capacity: 150kg / 330lbs / 23.6 Stone
- Assembled Dimensions: Length: 174cm (68") x Width: 114cm (44") x Height: 216cm (85")
- Assembled Product Weight: 160kg / 352lbs
- Seat Pad to Floor Height: 53cm (21”)
- Back Rest Pad Dimensions: Length: 61cm (24”) x Width: 32cm (12.5”)
- Seat Pad Dimensions: Length: 36cm (14”) x Width: 30cm (12”)
- Preacher Arm Curl Pad Dimensions: Length: 34cm (13”) x Width: 51cm (20”)
- Chest Press Handle to Handle Distances: Widest Grip: 95cm (37”) x Narrowest Grip: 65cm (25.5”)
- Leg Press Foot Plate Dimensions: Length: 25cm (10”) x Width: 12cm (5”)
- Leg Press Foot Plates Distance Apart: 64cm (25”)
Key Product Specifications:
- Framework: 14 gauge 5 x 5cm steel frame
- Upholstery: 2.5” inch thick box stitched padded upholstery for support & comfort
- Paint finish: Power coated chip resistant finish
- Guide rods: Solid steel 1” diameter
- Cables: 2000lb tensile strength aircraft cables for long lasting use
- Pulleys: 4" pulleys with sealed ball bearings for ultra-glide feel
- Compatible Floor Types: concrete, wood, mats, carpet
- Resistance to: Scratch resistant, sweat resistant, mildew resistant, rust resistant, tear resistant, odour resistant
- Material Type: Alloy Steel
- Color: Black / Red
- Manufacturer: Accell Fitness
- Item Model Number: 14MEHG7000
Warranty Information
Your Marcy Eclipse HG7000 Home Gym is covered by the following warranty:
- Lifetime frame warranty
- 3 Year warranty on Parts, Pulleys & Cables
- 1-Year warranty on Upholstery
Please retain your proof of purchase for any warranty claims.
Support
For technical assistance, missing parts, or warranty claims, please contact Marcy customer support. Refer to the contact information provided with your product packaging or visit the official Marcy website for support details.
When contacting support, please have your model number (HG7000 or 14MEHG7000) and proof of purchase readily available.
