1. Introduction and Overview
This manual provides essential information for the installation, operation, and maintenance of the Theben theMova S360-100 DE WH Passive Infrared (PIR) Motion Detector. This device is designed for ceiling mounting and offers a 360-degree detection area, suitable for various indoor applications, including damp areas (IP 54 when integrated).
The theMova S360-100 DE WH features one light channel and mixed light measurement. It includes a practical daylight sensor mode for brightness-dependent lighting control, which can be switched via an application. Operating time, detection sensitivity, and brightness switching values are individually configurable for precise control.
For immediate use, the detector comes with a factory preset brightness switching value of 300 lux and an operating time of 10 minutes.
2. Setup and Installation
2.1 Mounting Location
The Theben theMova S360-100 DE WH is designed for ceiling installation. It can be used in indoor environments, including damp areas, provided it is integrated correctly to maintain its IP 54 protection rating.
The recommended installation height is between 2 and 4 meters to achieve optimal detection coverage.
2.2 Dimensions
Refer to the diagram below for precise dimensions and cutout requirements for installation.
2.3 Electrical Connection
The device uses an electric cable for power and features spring terminals for connection. Ensure all electrical work is performed by a qualified professional and complies with local electrical codes.
2.4 Initial Configuration
The motion detector is factory preset with a brightness switching value of 300 lux and an operating time of 10 minutes, making it ready for immediate use upon installation.
3. Operating Instructions
3.1 Detection Area
The detector provides a 360-degree circular detection area, covering up to 50 m² (equivalent to a diameter of 8 meters) when mounted at a height of 3 meters.
3.2 Adjustable Parameters
The following parameters can be individually configured:
- Operating Time: Adjustable from 10 seconds to 60 minutes.
- Detection Sensitivity: Configurable to suit specific environmental needs.
- Brightness Switching Value: Precisely adjustable within a range of 30 to 3000 lux.
- Daylight Sensor Mode: Enables brightness-dependent lighting control, switchable via an application.
3.3 Parameter Adjustment
Changing values and parameters is only possible via a separately sold remote control. Compatible remote controls include:
- theSenda B universal remote control (Reference: 9070985)
- theSenda P service remote control (Reference: 9070910)
- theSenda S remote control (Reference: 9070911) - available for users.
4. Maintenance
The Theben theMova S360-100 DE WH motion detector requires minimal maintenance. Regularly inspect the sensor lens for dust or obstructions and clean gently with a soft, dry cloth if necessary. Do not use abrasive cleaners or solvents.
Ensure the mounting remains secure and that no external factors impede the detection area.
5. Troubleshooting
5.1 Detector Not Responding
- Check Power Supply: Ensure the device is receiving continuous power (230 V AC, 50 Hz).
- Verify Wiring: Confirm that all electrical connections are secure and correctly wired according to installation instructions.
- Obstructions: Check if any objects are blocking the sensor's field of view.
5.2 Lights Not Switching On/Off
- Brightness Setting: The ambient light level might be above the set brightness switching value. Adjust the lux setting using a compatible remote control.
- Operating Time: The set operating time might be too short or too long. Adjust as needed.
- Detection Sensitivity: If the detector is not sensing movement, increase the sensitivity.
- Lamp Compatibility: Ensure the connected lamps are compatible and within the specified load limits (see Specifications).
5.3 Inconsistent Operation
- Environmental Factors: Rapid temperature changes or strong air currents can sometimes affect PIR sensors. Ensure the installation environment is stable.
- Interference: Check for potential sources of electrical interference nearby.
If issues persist after attempting these troubleshooting steps, contact customer support.
6. Specifications
| Manufacturer | Theben |
| Model Number | 1030560 |
| Product Dimensions (L x W x H) | 8.5 x 8.5 x 9.7 cm |
| Weight | 90 grams |
| Color | White |
| Power Source | Electric Cable |
| Operating Voltage | 230 V AC |
| Frequency | 50 Hz |
| Installation Height | 2 - 4 m |
| Installation Type | Ceiling installation, Indoor |
| Switching Output | Light |
| Power Consumption | ~0.5 W |
| Light Measurement | Mixed light measurement |
| Brightness Setting Range | 30 - 3000 lx |
| Light Switch-off Delay | 10 s - 60 min |
| Type of Contact Light | Relay 230 V/10 A µ-contact |
| Lamp Types Supported | Incandescent/halogen lamps, fluorescent lamps, energy-saving lamps, LEDs |
| Incandescent/Halogen Lamp Load | 2300 W |
| Compact and Fluorescent Lamp Load | 1150 VA (cos φ = 0.5) |
| Inrush Current | max. 400 A / 200 µs |
| LED Lamp Load (< 2 W) | 25 W |
| LED Lamp Load (2-8 W) | 250 W |
| LED Lamp Load (> 8 W) | 250 W |
| Type of Connection | Spring terminals |
| Detection Range | 50 m² (ø 8 m) |
| Detection Angle | 360° |
| Ambient Temperature | -15°C ... 50°C |
| Type of Protection | IP 54 (when fitted) |
| Compatible Devices | Lighting controls, security systems, Smart Home hubs |
| Recommended Uses | Security (home monitoring, burglar alarm system), automation (automatic light control), energy management (energy saving) |
7. Warranty and Support
7.1 Warranty Information
Specific warranty details for the Theben theMova S360-100 DE WH are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Theben customer support. Refer to the official Theben website or product packaging for the most current contact information.
