Lasko S16201 16-Inch Oscillating Stand Fan Instruction Manual

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this fan.
• Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• To reduce the risk of fire or electric shock, do not expose this fan to water or rain.
• This fan is intended for household use only and not for commercial, industrial, or outdoor use.
• Always unplug the fan when moving it, cleaning it, or whenever it is not in use.
• Do not operate any fan with a damaged cord or plug or after the fan malfunctions or has been dropped or damaged in any manner.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area where it will not be tripped over.
• Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the fan.
• Do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• Always place the fan on a stable, flat, level surface during operation to avoid the chance of the fan overturning.
• This fan is not intended for use in wet or damp locations.
• The Blue Plug™ Patented safety fuse technology.

Setup and Assembly

The Lasko S16201 Oscillating Stand Fan requires minimal assembly. Ensure all components are present before beginning.

Components:

• Fan Head Assembly
• Adjustable Stand Pole
• Base
• Mounting Hardware (if applicable)

Assembly Steps:

1. Attach the Base: Securely attach the stand pole to the circular base using the provided hardware. Ensure it is tightened to prevent wobbling.
2. Mount the Fan Head: Carefully place the fan head assembly onto the top of the stand pole. Align the connection points and secure it firmly.
3. Adjust Height: The fan features an adjustable height mechanism. Loosen the height adjustment collar on the stand pole, extend or retract the pole to your desired height, and then tighten the collar securely.

Image: The Lasko S16201 Oscillating Stand Fan fully assembled, showcasing its white finish and adjustable height.

Operating Instructions

The Lasko S16201 fan is designed for simple and effective operation.

Powering On/Off and Speed Control:

• Power On: Plug the fan into a standard 120V AC electrical outlet.
• Speed Selection: Locate the rotary switch on the fan head. Turn the knob to select one of the three quiet speeds: 1 (Low), 2 (Medium), or 3 (High). To turn the fan off, rotate the knob to the '0' position.

Oscillation Function:

• To activate the oscillation feature, push down the small knob located on top of the fan motor housing. The fan head will begin to sweep from side to side, distributing air across a wider area.
• To stop oscillation and direct airflow in a fixed direction, pull up the oscillation knob.

Tilt Adjustment:

• The fan head can be tilted up or down to direct airflow precisely where needed. Gently push or pull the fan head to adjust its vertical angle.

Image: The Lasko S16201 fan positioned in a living room, demonstrating its ability to blend into home environments while providing cooling.

Maintenance and Cleaning

Regular cleaning helps maintain the fan's performance and extends its lifespan.

• Before Cleaning: Always unplug the fan from the electrical outlet before cleaning.
• Exterior Cleaning: Use a soft cloth dampened with a mild soap solution to wipe the exterior surfaces of the fan. Do not use gasoline, benzene, thinner, harsh cleaners, etc., as they will damage the fan.
• Blade Cleaning: The fan grille can be removed for thorough cleaning of the blades. Refer to the assembly instructions in reverse to carefully detach the front grille. Wipe the blades with a soft, damp cloth. Ensure blades are completely dry before reassembling the grille.
• Storage: When storing the fan, keep it in a cool, dry place. It is recommended to store the fan in its original carton or cover it to protect it from dust.

Troubleshooting Guide

If your Lasko S16201 fan is not operating as expected, consult the following common issues and solutions:

Product Specifications

Warranty and Support

This Lasko S16201 Oscillating Stand Fan comes with a 1-year manufacturer limited warranty.

For technical assistance, product inquiries, or warranty claims, please contact Lasko Customer Service:

• Website: www.lasko.com
• Phone: Refer to Lasko's official website for current contact numbers.

Please have your model number (S16201) and purchase information ready when contacting support.