Rowenta SF6158 Versa Styler Instruction Manual

1. Product Overview

The Rowenta SF6158 Versa Styler is a multi-functional hair styling tool designed to perform the functions of a flat iron, roller set, and curling iron. It incorporates ProCurling technology with curved lateral edges and soft grip silicone strips to facilitate various styling techniques, including curling, waving, and root lift. The styling plates are constructed from tri-material, infused with titanium and coated with tourmaline-boosted ceramic, which emits infrared ionic heat for smoother, shinier results.

An image of the Rowenta SF6158 Versa Styler, showcasing its sleek black design and 1-inch styling plates.

2. Important Safety Instructions

Please read all safety instructions before using this appliance to reduce the risk of burns, electrocution, fire, or injury to persons.

• Burn Hazard: Surfaces become extremely hot during use. Avoid direct contact with skin, especially the face, neck, and hands.
• Electric Shock Risk: Keep the appliance away from water. Do not use it near bathtubs, sinks, showers, or any other water-filled containers. Do not immerse the appliance in water or any other liquid.
• Fire Risk: Unplug the appliance immediately after use and when not in use. Do not leave the appliance unattended when it is plugged in. Keep away from flammable materials.
• Children: Keep this appliance out of the reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Damage: Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been dropped or damaged in any manner.

3. Product Features

• Pro Curling Technology: Features soft-friction curved edges and surrounding soft grip silicone strips to support multi-styling techniques for various hair types.
• Tri-Material Plates: Constructed with ultra-resistant titanium and tourmaline-boosted ceramic coating, designed to emit gentle infrared ionic heat for smooth, shiny results.
• Versatile Styling: Functions as a flat iron for straightening, a roller set for volume, and a curling iron for waves and curls.
• LED Heat Indicator: Provides clear indication of the selected temperature setting.

4. Setup

1. Ensure your hands are dry before handling the appliance.
2. Uncoil the power cord completely.
3. Plug the appliance into a suitable electrical outlet (120V AC for North America).
4. Place the styler on a heat-resistant, flat surface, away from flammable materials, before turning it on.

5. Operating Instructions

General Use

• Ensure hair is clean, completely dry, and detangled before styling.
• Turn on the styler using the power button.
• Select the desired temperature using the temperature control buttons. The LED indicator will display the chosen heat setting.
• Allow the styler to heat up completely before use. This usually takes a few minutes.

Straightening Hair

1. Divide your hair into small, manageable sections (approximately 1-inch wide).
2. Take one section of hair and place it between the styling plates, close to the roots.
3. Gently close the plates and glide the styler slowly and steadily down the hair section from roots to ends. Avoid stopping in one place to prevent heat damage.
4. Repeat the process on all sections of hair until desired straightness is achieved.

Curling or Waving Hair

1. Divide your hair into small, manageable sections.
2. Take one section of hair and clamp it between the styling plates at the desired starting point for the curl (e.g., mid-shaft).
3. Rotate the styler 180 degrees (either towards or away from your face, depending on the desired curl direction).
4. Slowly pull the styler through the hair section, maintaining the 180-degree rotation. The curved edges and silicone strips will assist in forming the curl or wave.
5. Release the hair and allow the curl to cool before touching or styling further.
6. Repeat on all sections of hair.

6. Maintenance and Care

1. Always unplug the appliance from the electrical outlet and allow it to cool completely before cleaning or storing.
2. Wipe the styling plates and the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surfaces.
3. Do not immerse the appliance in water or any other liquid.
4. Ensure the appliance is completely dry before storing.
5. Store the styler in a dry, safe place, away from children, when not in use. Do not wrap the cord around the appliance, as this can cause damage to the cord.

7. Troubleshooting

• Appliance does not heat up:
  • Check if the appliance is properly plugged into a working electrical outlet.
  • Ensure the power button is on and the desired temperature setting is selected.
• Hair is not curling/straightening effectively:
  • Ensure hair is clean, completely dry, and free of tangles.
  • Use smaller sections of hair for better results.
  • Verify that the styler has reached the desired temperature.
  • Adjust your styling technique, ensuring consistent speed and pressure.
• Hair is snagging or pulling:
  • Ensure hair is thoroughly detangled before styling.
  • Check for any residue on the plates and clean if necessary (when cool and unplugged).

8. Specifications

9. Warranty and Support

For detailed warranty information, product registration, and customer support, please refer to the documentation included with your purchase. You may also visit the official Rowenta website for further assistance and contact information.

Visit the Official Rowenta Website