Conair Custom Cut Model HC118RW 17 Piece Home Haircutting Kit User Manual

Introduction

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Conair Custom Cut Model HC118RW 17 Piece Home Haircutting Kit. Please read all instructions carefully before using the appliance.

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

• DANGER – To reduce the risk of electric shock:
• Always unplug this appliance from the electrical outlet immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• WARNING – To reduce the risk of burns, electric shock, fire, or injury to persons:
• An appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended household use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
• Keep the cord away from heated surfaces. Do not pull, twist, or wrap cord around the appliance.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use this appliance with a damaged or broken comb or blade, as injury may occur.
• Before connecting or disconnecting, ensure the switch is in the OFF position.

Package Contents

Your Conair Custom Cut Model HC118RW 17 Piece Home Haircutting Kit includes the following items:

• Hair Clipper (Corded Electric)
• Blade Guard
• Multiple Guide Combs (various sizes for different hair lengths)
• Barber Comb
• Barber Scissors
• Cleaning Brush
• Lubricating Oil
• Storage Case
• Instruction Manual

Image: Conair Custom Cut Model HC118RW 17 Piece Home Haircutting Kit. This image displays the main clipper unit along with its accessories, including several guide combs, barber scissors, a barber comb, cleaning brush, and lubricating oil, all neatly arranged.

Setup

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport if desired.
2. Inspect: Check the clipper and all accessories for any signs of damage. Do not use if any part is damaged.
3. Initial Oiling: Before first use, apply a few drops of the provided lubricating oil to the blades. Turn the clipper on for a few seconds to distribute the oil. Wipe off any excess oil.
4. Attach Guide Comb: Select the desired guide comb for your preferred hair length. Align the comb with the clipper blade and press firmly until it clicks securely into place. Ensure it is properly seated before use.

Operating Instructions

General Haircutting Tips:

• Ensure hair is clean and dry before cutting.
• Always start with a longer guide comb than you think you need. You can always cut more hair off, but you cannot put it back on.
• Cut against the direction of hair growth for an even cut.
• Use smooth, overlapping strokes.
• Regularly tap or brush hair clippings from the blades during use to maintain cutting efficiency.

Using the Clipper:

1. Prepare: Drape a cape or towel around the person's neck to catch hair clippings.
2. Select Comb: Attach the appropriate guide comb for the desired hair length.
3. Power On: Plug the clipper into a suitable electrical outlet. Turn the clipper ON using the power switch.
4. Cut Hair: Hold the clipper with the blades pointing upwards and the guide comb flat against the head. Move the clipper slowly through the hair, working from the bottom upwards.
5. Detailing: For outlining and detailing around the ears and neckline, remove the guide comb and use the bare blades carefully.
6. Power Off: Once finished, turn the clipper OFF and unplug it from the outlet.

Maintenance

Cleaning After Each Use:

1. Unplug: Always ensure the clipper is turned OFF and unplugged before cleaning.
2. Remove Comb: Detach any guide comb from the clipper.
3. Brush Blades: Use the provided cleaning brush to remove loose hairs from the blades and the clipper housing.
4. Oil Blades: Apply 1-2 drops of lubricating oil to the blades. Turn the clipper on for a few seconds to allow the oil to spread. Wipe off any excess oil with a soft cloth. This helps maintain blade sharpness and prevents rust.

Storage:

Store the clipper and all accessories in the provided storage case in a cool, dry place, out of reach of children.

Troubleshooting

• Clipper does not turn on:
  • Ensure the clipper is securely plugged into a working electrical outlet.
  • Check the power switch is in the 'ON' position.
• Clipper pulls hair or does not cut effectively:
  • The blades may be dull or dirty. Clean the blades thoroughly with the brush and apply lubricating oil.
  • Ensure you are cutting against the direction of hair growth.
  • Hair may be too thick or wet. Ensure hair is dry and comb through to remove tangles before cutting.
  • The guide comb might be clogged with hair. Remove and clean it.
  • The clipper may require professional servicing if the issue persists after cleaning and oiling.
• Excessive noise or vibration:
  • Ensure the blades are properly aligned and secured.
  • Apply lubricating oil to the blades.
  • If the noise persists, the internal mechanism may require inspection by a qualified service technician.

Specifications

Warranty and Support

For warranty information or customer support regarding your Conair Custom Cut Model HC118RW Haircutting Kit, please refer to the warranty card included in your package or visit the official Conair website. Do not attempt to repair the appliance yourself, as this may void the warranty.

For service inquiries, please contact Conair Customer Service directly.