1. Introduction
The Paradox IP150 Internet Module is a sophisticated device designed to integrate Paradox security systems with internet connectivity. This module enables remote monitoring, control, and reporting capabilities for compatible alarm panels such as Magellan, Spectra, and Digiplex EVO series. By connecting your alarm system to the internet, the IP150 facilitates enhanced security management and accessibility.
2. Setup and Installation
Proper installation of the IP150 module is crucial for its optimal performance. It is recommended that installation be performed by a qualified security professional.
2.1. Component Identification
Figure 1: Paradox IP150 Internet Module Overview
This image displays the Paradox IP150 Internet Module. On the left, a LAN port is visible for network connection. The center features LED indicators labeled 'USER', 'INTERNET', and 'LINK' (with 10-Yellow and 100-Green speed indications), along with 'RX/TX' for data transmission. On the right, connections for the alarm panel are marked 'PANEL' with I/O 1, C, and I/O 2 terminals, and a 'SERIAL OUT' port.
2.2. Connection Steps
- Connect to Alarm Panel: Connect the IP150 module to the designated communication port on your compatible Paradox alarm panel (e.g., Magellan, Spectra, Digiplex EVO) using the provided cable. Ensure the connection to the "PANEL" and "SERIAL OUT" terminals is secure.
- Network Connection: Plug a standard Ethernet cable into the "LAN" port on the IP150 module and connect the other end to your network router or switch.
- Power Up: Ensure the alarm panel is powered on. The IP150 module draws power directly from the panel.
- Initial Configuration: Access the module's configuration interface via a web browser or Paradox's dedicated software (e.g., BabyWare, IP Explorer) to set up network parameters, port forwarding (if required), and connect to Paradox's Swan server for remote access. Refer to the specific software manual for detailed configuration steps.
3. Operating the IP150 Module
Once installed and configured, the IP150 module operates largely autonomously, providing a bridge between your alarm system and the internet. Its primary function is to facilitate communication for remote monitoring and control.
3.1. LED Indicators
The IP150 module features several LED indicators that provide visual feedback on its operational status:
- USER LED: Indicates user activity or specific module status. Consult your alarm panel's manual for specific interpretations.
- INTERNET LED: Illuminates when the module has successfully established a connection to the internet.
- LINK LED: Indicates network link status. A yellow light typically signifies a 10 Mbps connection, while a green light indicates a 100 Mbps connection.
- RX/TX LED: Flashes to indicate data transmission (TX) and reception (RX) activity over the network.
3.2. Remote Access and Monitoring
The IP150 allows for remote access to your alarm system via Paradox's Insite GOLD mobile application or PC-based software. This enables you to:
- Arm or disarm your security system.
- Receive event notifications and alarms.
- View system status and zone activity.
- Control PGM outputs (if configured).
Ensure your internet connection is stable for reliable remote operation.
4. Maintenance
The Paradox IP150 Internet Module is designed for low maintenance. Regular checks should focus on ensuring stable network connectivity and proper operation of the alarm system it is connected to.
- Environmental Conditions: Ensure the module is kept in a dry environment, free from excessive dust, moisture, and extreme temperatures.
- Cable Integrity: Periodically inspect all connected cables (Ethernet and panel connection) for any signs of damage or loose connections.
- Firmware Updates: Check the Paradox website or consult your installer for information on available firmware updates for the IP150 module. Updates can improve performance and add new features.
- Network Stability: Ensure your home or business network is stable and provides consistent internet access for the module to function correctly.
5. Troubleshooting
If you encounter issues with your IP150 module, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| INTERNET LED is off or flashing irregularly. | No internet connection, network issue, or incorrect configuration. |
|
| LINK LED is off. | No physical network link. |
|
| Cannot access module remotely. | Internet connection issue, port forwarding not configured, or Swan server issue. |
|
| Module not recognized by alarm panel. | Incorrect wiring or panel compatibility issue. |
|
If problems persist, contact Paradox technical support or your authorized installer.
6. Specifications
- Manufacturer: PARADOX
- Part Number: 8388765517486
- Item Weight: 0.704 ounces
- Package Dimensions: 4.41 x 2.05 x 1.18 inches
- Connectivity: Ethernet (LAN)
- Compatibility: Paradox Magellan, Spectra, and Digiplex EVO series alarm panels.
- Power Source: Powered by the alarm panel.
- Date First Available: April 15, 2014
7. Warranty Information
For detailed warranty information regarding the Paradox IP150 Internet Module, please refer to the warranty card included with your product packaging or visit the official Paradox Security Systems website. Warranty terms and conditions may vary by region and retailer.
8. Technical Support
If you require technical assistance or have questions not covered in this manual, please contact your authorized Paradox dealer or installer. You can also visit the official Paradox Security Systems website for support resources, FAQs, and contact information.
Paradox Official Website: www.paradox.com
