Lil' Rider 80-1299GR

Lil' Rider Wiggle Car Instruction Manual

Model: 80-1299GR

Introduction

Thank you for choosing the Lil' Rider Wiggle Car. This ride-on toy is designed to provide an engaging and active experience for children aged 3 years and up. It operates without batteries, gears, or pedals, utilizing natural forces for movement. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

Safety Information

  • WARNING: CHOKING HAZARD - Small Parts. Not for children under 3 years.
  • Intended to be used under direct supervision of an adult.
  • Maximum weight capacity: 110 lbs (50 kg).
  • Do not use on wood floors as it may cause damage.
  • Ensure all parts are securely assembled before each use.
  • Always use on smooth, flat surfaces. Avoid uneven terrain, stairs, or inclines.
  • Keep hands and feet clear of moving wheels.

Parts List

The Lil' Rider Wiggle Car (Model 80-1299GR) includes the following components:

  • Wiggle Car Body (Green)
  • Steering Wheel Assembly
  • Front Wheels (pre-attached to steering assembly)
  • Rear Wheels (2)
  • Hardware (nuts, bolts, washers, socket tool)

Please inspect all parts for damage before assembly. If any parts are missing or damaged, contact customer support.

Setup and Assembly

Assembly requires adult supervision. A socket wrench (not included) is recommended for easier assembly, though a basic socket tool is provided.

  1. Attach Rear Wheels: Securely attach the two rear wheels to the designated axles on the underside of the car body using the provided hardware. Ensure they are firmly tightened to prevent wobbling.
  2. Install Steering Wheel: Insert the steering column of the steering wheel assembly into the opening on the front of the car body. Ensure the steering wheel is oriented correctly, with the handles facing forward.
  3. Secure Steering Wheel: From the underside of the car, attach the retaining nut and washer to the bottom of the steering column. Tighten firmly using the provided socket tool or a socket wrench until the steering wheel is securely locked into place and does not pull off easily.
  4. Final Check: Verify that all wheels spin freely and the steering wheel is securely attached and turns smoothly.
Diagram showing the Lil' Rider Wiggle Car with labels for non-slip steering, smooth swivel wheels, and safe curved design.
Figure 1: Key features of the Wiggle Car, including non-slip steering, smooth swivel wheels, and a safe curved design.

Operating Instructions

The Lil' Rider Wiggle Car is powered by natural forces and rider input. No batteries or pedals are required.

  1. Seating Position: The rider should sit comfortably on the seat with both feet placed on the footrests.
  2. Initiating Movement: To move forward, the rider should grasp the steering wheel and turn it left and right in a continuous, wiggling motion. This motion, combined with gravity and centrifugal force, propels the car forward.
  3. Steering: To steer, simply turn the steering wheel in the desired direction. The front swivel wheels respond to the steering input.
  4. Stopping: To stop, cease the wiggling motion and place feet on the ground. The car will gradually slow down.
A young child riding the Lil' Rider Wiggle Car on a paved surface outdoors, demonstrating the 'Twist, Wiggle and Go' motion.
Figure 2: A child demonstrating the 'Twist, Wiggle and Go' motion to operate the Wiggle Car.

Recommended Surfaces

The Wiggle Car performs best on smooth, flat surfaces. Suitable surfaces include:

  • Concrete
  • Asphalt
  • Linoleum
  • Tile

Note: Do not use on wood floors, as this may cause scratches or damage. Avoid rough surfaces, grass, or sand, which can impede movement and damage wheels.

An image illustrating various suitable surfaces for the Wiggle Car, including concrete, linoleum, tile, and asphalt, highlighting its indoor and outdoor use.
Figure 3: Examples of suitable indoor and outdoor surfaces for Wiggle Car operation.

Maintenance

  • Cleaning: Wipe the car with a damp cloth and mild soap as needed. Avoid harsh chemicals or abrasive cleaners.
  • Wheel Inspection: Periodically check the wheels for wear, damage, or debris. Remove any hair, string, or other obstructions that may hinder wheel movement.
  • Fastener Check: Regularly inspect all nuts and bolts to ensure they are tight. Re-tighten as necessary to maintain structural integrity.
  • Storage: Store the Wiggle Car in a cool, dry place away from direct sunlight when not in use to prolong its lifespan.

Troubleshooting

ProblemPossible CauseSolution
Car does not move or moves slowly.Incorrect operating technique; uneven or rough surface; wheels obstructed.Ensure continuous left-right wiggling motion. Move to a smooth, flat surface. Check wheels for debris and clear if necessary.
Steering wheel is loose or comes off.Steering column not securely fastened.Re-tighten the retaining nut on the underside of the car body until the steering wheel is firm.
Squeaking noise from wheels.Wheels need lubrication or cleaning.Clean wheels and axles. Apply a small amount of silicone-based lubricant if noise persists.

Specifications

  • Model Number: 80-1299GR
  • Material: High-quality Plastic, Metal Frame
  • Color: Green and Black
  • Dimensions (L x W x H): 30" x 13.5" x 16" (76.2 cm x 34.3 cm x 40.6 cm)
  • Item Weight: Approximately 4.15 lbs (1.88 kg)
  • Weight Capacity: 110 lbs (50 kg)
  • Recommended Age: 36 months to 8 years
  • Power Source: Kid-powered (no batteries, gears, or pedals)
A diagram showing the dimensions of the Lil' Rider Wiggle Car: 30 inches long, 13.5 inches wide, and 16 inches high. It also states a weight capacity of 110 lbs and is for children 3 years and up.
Figure 4: Product dimensions and weight capacity of the Wiggle Car.

Warranty and Support

The Lil' Rider Wiggle Car comes with a 30-day warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims, missing parts, or technical support, please contact the manufacturer, Trademark GLB, directly. Refer to your purchase documentation for specific contact information or visit the Lil' Rider official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.