1. Introduction
This instruction manual provides essential information for the safe installation, operation, and maintenance of your Sonneman 2430.01-ST Tubo Slim LED Linear Vanity Light. This 18-inch fixture features a polished chrome finish and a distinctive spine trim, designed to provide efficient 3000K LED lighting for bathroom or bedroom environments. Please read this manual thoroughly before proceeding with installation or use.
Figure 1: Sonneman Tubo Slim LED Linear Vanity Light (Model 2430.01-ST)
The Tubo Slim LED Linear Vanity Light is engineered for modern aesthetics and energy efficiency, offering versatile placement options to enhance various interior spaces.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.
- All electrical connections must be in accordance with local codes and ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Do not install this fixture in wet locations. It is rated for indoor use only.
- Handle the fixture with care to prevent damage to the glass components.
- Ensure all mounting hardware is securely fastened before restoring power.
- Do not attempt to modify the fixture or its components.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- Sonneman 2430.01-ST Tubo Slim LED Linear Vanity Light Fixture
- Integrated LED Bulb (pre-installed)
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual (this document)
4. Setup and Installation
Professional installation is recommended for this electrical fixture.
4.1 Pre-Installation
- Turn off power: Locate the circuit breaker or fuse box and turn off the power to the electrical box where the fixture will be installed.
- Unpack contents: Carefully remove all components from the packaging and inspect for any damage.
- Prepare tools: Gather necessary tools, which typically include a screwdriver, wire strippers, and electrical tape.
4.2 Mounting the Fixture
- Attach the mounting plate to the electrical box using the provided screws. Ensure it is securely fastened.
- Connect the electrical wires:
- Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the electrical box and the mounting plate using a wire nut or ground screw.
- Carefully tuck all wires into the electrical box.
- Align the fixture with the mounting plate and secure it using the provided screws. Do not overtighten.
Figure 2: Example installation of the Tubo Slim LED Linear Vanity Light in a bathroom setting.
4.3 Post-Installation
- Restore power at the circuit breaker or fuse box.
- Test the fixture to ensure proper operation.
5. Operating Instructions
The Sonneman 2430.01-ST Tubo Slim LED Linear Vanity Light is designed for straightforward operation.
- Standard Operation: The fixture is controlled by a standard wall switch connected to the electrical circuit. Flip the switch to the 'ON' position to illuminate the light and to the 'OFF' position to turn it off.
- Remote/Touch Control: This fixture is compatible with remote control and touch control methods. These functionalities require specific wiring and compatible control accessories, which are typically sold separately. Consult a qualified electrician for integration of advanced control systems.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your light fixture.
- Cleaning: To clean the fixture, ensure the power is off. Use a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or glass.
- LED Light Source: The LED light source in this fixture is integrated and not designed for user replacement. If the LED light source fails, contact Sonneman customer support for assistance.
- Inspection: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, disconnect power and consult a qualified electrician or Sonneman support.
7. Troubleshooting
If you encounter issues with your Sonneman Tubo Slim LED Linear Vanity Light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty wall switch | Check circuit breaker/fuse. Ensure power is restored. Verify all wire connections are secure (with power off). Test the wall switch or consult an electrician. |
| Light flickers | Loose wiring connection Incompatible dimmer switch (if applicable) Power supply issue | Check all wire connections (with power off). Ensure any dimmer switch used is LED-compatible. Consult an electrician to check the power supply. |
| Fixture is hot to the touch | Normal operation (LEDs generate some heat) Improper ventilation Overload on circuit | Some heat is normal. Ensure fixture is not enclosed. Verify fixture is installed in an open area as intended. Consult an electrician to check the circuit load. |
If these steps do not resolve the issue, contact Sonneman customer support or a qualified electrician.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Sonneman |
| Model Name | Tubo Slim |
| Part Number | 2430.01-ST |
| Color | Polished Chrome - Spine Trim |
| Material | Glass |
| Style | Tubo Slim |
| Light Fixture Form | Sconce |
| Room Type | Bathroom |
| Product Dimensions | 3.25"L x 19.5"W x 4.25"H |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Control Method | Remote, Touch (with compatible accessories) |
| Light Source Type | LED |
| Finish Type | Polished |
| Shade Material | Glass |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Included Components | Bulb (integrated LED) |
| Warranty Type | Limited |
| Lighting Method | Up/Down Light |
| Specification Met | ADA |
| Item Weight | 4.9 Pounds |
| Wattage | 13 watts |
| Mounting Type | Ambient Lighting |
| UPC | 872681056474 |
| Date First Available | February 25, 2014 |
9. Warranty and Support
All Sonneman products purchased are covered by a 30-day replacement parts policy to ensure a fully working item. Additionally, all products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped.
The warranty covers all items and conditions identified in the original manufacturer's warranty. Items specifically not covered by the warranty include, but are not limited to, loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
For warranty claims, technical support, or replacement parts, please visit the official Sonneman website or contact their customer service department directly. Keep your proof of purchase for warranty validation.
