ECR4Kids Hardwood Table and Chairs Set (Model ELR-7119-HY) Instruction Manual

Introduction

This manual provides essential information for the safe and proper use, assembly, and maintenance of your ECR4Kids Hardwood Table and Chairs Set. This set is designed for toddlers and preschoolers, offering a dedicated space for activities in both home and classroom environments. Please read all instructions carefully before assembly and use.

The ECR4Kids Hardwood Table and Chairs Set is constructed from durable rubberwood, featuring a honey stain finish. It includes one rectangular table and two chairs, suitable for children's activities.

Setup and Assembly

The ECR4Kids Hardwood Table and Chairs Set arrives ready-to-assemble. Adult assembly and supervision are required. Please ensure all components are present before beginning assembly.

Components Checklist:

• 1 x Rectangular Tabletop
• 4 x Table Legs
• 2 x Chair Seats
• 2 x Chair Backrests
• 4 x Chair Front Legs
• 4 x Chair Rear Legs
• Necessary hardware (screws, bolts, Allen wrench)

Assembly Instructions:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratching.
2. Assemble Table:
   • Attach each table leg to the designated corner of the tabletop using the provided hardware. Ensure all connections are secure but do not overtighten until all legs are in place.
   • Once all legs are attached, gently tighten all hardware to ensure stability.
3. Assemble Chairs: (Repeat for both chairs)
   • Attach the chair backrest to the chair seat.
   • Attach the front and rear legs to the chair seat and backrest assembly.
   • Ensure all connections are secure. Nylon glides are pre-installed on the chair legs to protect floors.
4. Final Check: Verify that all screws and bolts are securely tightened on both the table and chairs. Ensure the furniture is stable and level before use.

Image: Table Dimensions. The table measures 36 inches (91.4 cm) in width, 24 inches (60.9 cm) in depth, and 20.8 inches (52.8 cm) in height.

Image: Chair Dimensions. Each chair measures 12.25 inches (31.1 cm) in width, 12 inches (30.5 cm) in depth, and 22.25 inches (56.5 cm) in height, with a seat height of 10 inches (25.4 cm).

Operating and Usage

This ECR4Kids Hardwood Table and Chairs Set is designed to provide a comfortable and dedicated workspace for toddlers and preschoolers. It is ideal for various activities such as drawing, puzzles, reading, and snacking.

Key Usage Guidelines:

• Dedicated Workspace: Utilize the set to create a distraction-free area for children's activities.
• Space Saving: The chairs are designed to invert and stack or nest under the table, saving valuable floor space when not in use.
• Safety Features: The chairs feature smooth, rounded edges for safety, a vented back for air circulation and good posture, and angled rear legs for stability. Nylon glides are included to protect floors.
• Supervision: Always ensure children are supervised while using the furniture.

Image: Dedicated Space. Children engaging in an activity at the table, demonstrating its use as a dedicated learning or play area.

Image: Functional Features. This image illustrates the safety and design elements of the chair, including smooth edges, a vented back for comfort, angled rear legs for stability, and nylon glides to protect flooring.

Image: Designed with Kids in Mind. A chart detailing seat height recommendations based on age, along with weight capacity, functional load, and proof load for children's chairs, ensuring safety and ergonomic design.

Maintenance and Care

Proper maintenance will extend the life and appearance of your ECR4Kids Hardwood Table and Chairs Set.

Cleaning Instructions:

• General Cleaning: Wipe the surfaces of the table and chairs with a dry cloth. For tougher spots, a slightly damp cloth can be used, followed immediately by a dry cloth to remove any moisture.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the wood finish.

General Care:

• Regular Inspection: Periodically check all hardware connections to ensure they remain tight. Retighten if necessary.
• Protect from Elements: Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can cause wood to warp or fade.
• Floor Protection: The chairs are equipped with nylon glides to protect your floors. Ensure these glides are intact and clean.

Image: Cleaning the Table. A hand demonstrates wiping the table surface with a dry cloth, illustrating the recommended cleaning method.

Troubleshooting

This section addresses common issues you might encounter with your ECR4Kids Hardwood Table and Chairs Set.

Common Issues and Solutions:

• Wobbly Table/Chair:
  • Ensure all assembly hardware (screws, bolts) are fully tightened.
  • Check that the furniture is placed on a level surface.
  • If a leg is slightly shorter, a small felt pad can be applied to the bottom of the shorter leg to stabilize.
• Scratches on Wood Surface:
  • Minor scratches can sometimes be minimized with wood repair markers or furniture polish designed for hardwood.
  • To prevent future scratches, use placemats or protective coverings during activities.
• Nylon Glides Damaged/Missing:
  • Contact ECR4Kids customer support for replacement glides.
  • Temporary felt pads can be used until replacements are acquired.

Product Specifications

Image: Product Certifications. This image displays the various safety and quality certifications achieved by the product, including GREENGUARD GOLD, CPSIA, and BIFMA standards for educational seating and tables.

Image: Sustainable Rubberwood. Details on the material's properties, such as its long-lasting finish, heirloom quality, and UV inhibitor for durability and resistance to yellowing.

Warranty Information

Specific warranty details for the ECR4Kids Hardwood Table and Chairs Set are typically provided at the time of purchase or included with the product packaging. Please refer to the documentation accompanying your purchase for comprehensive warranty terms and conditions. For further inquiries regarding warranty coverage, please contact ECR4Kids customer support directly.

Customer Support

For assistance with assembly, missing parts, product inquiries, or any other support needs, please contact ECR4Kids customer service. Contact information can typically be found on the product packaging, the ECR4Kids official website, or through your retailer.

When contacting support, please have your product model number (ELR-7119-HY) and proof of purchase readily available to expedite the service process.