1. Introduction
This manual provides comprehensive instructions for the Scalextric Micro Hyper-Cars Race Slot Car Set, Model G1108T. This 1:64 scale electric slot car set is designed for racing enthusiasts, featuring two high-performance cars and over 11 feet of track. Please read this manual thoroughly before assembly and operation to ensure safe and optimal performance.
Image 1.1: The Scalextric Micro Hyper-Cars Race Slot Car Set, including the track, two cars, and two controllers.
2. Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Recommended Age: This product is suitable for ages 8 years and older. Adult supervision is recommended for younger users.
- Choking Hazard: Contains small parts and small magnets. Not suitable for children under 3 years due to choking hazards.
- Electrical Safety: Use only the provided power adapter. Do not attempt to modify the electrical components. Keep the track and power unit away from water or damp conditions.
- Track Assembly: Ensure all track pieces are securely connected to prevent power interruptions or cars derailing unexpectedly.
- Car Maintenance: Do not touch moving parts of the cars while the power is connected.
3. Package Contents
Verify that all components are present in the box:
- 1:64th Scale Slot Car Race Track Set
- 2 x Slot Cars (Bugatti Veyron models)
- 2 x Hand Controllers with adjustable speed
- Power Supply Unit
- Track Supports/Risers (if applicable for bridge sections)
- Spare Contact Brushes for cars
- Instruction Manual
Image 3.1: The product packaging, indicating the contents and scale.
4. Setup Instructions
Follow these steps to assemble your race track:
- Choose a Location: Select a flat, stable surface for your track. Ensure there is enough space for the desired track layout. The assembled track can be approximately 139cm long.
- Assemble the Track: Connect the track pieces by aligning the connectors and pressing them firmly together. Ensure a tight fit for consistent electrical contact. Refer to the included layout diagrams for various track configurations.
Image 4.1: Examples of 9 unique track configurations that can be built with the set.
- Connect Power Base: Integrate the power base track piece into your layout.
- Connect Controllers: Plug the hand controllers into the designated ports on the power base.
- Connect Power Supply: Plug the power supply unit into the power base, then into a suitable electrical outlet.
- Prepare Cars: Place the slot cars onto the track, ensuring the guide flag on the underside of each car is correctly seated in the track slot and the contact brushes are making good contact with the metal rails.
Image 4.2: An example track layout with a human figure for scale, illustrating the approximate size of the assembled track.
5. Operating Instructions
Once the track is assembled and powered, you are ready to race:
- Start Racing: Gently press the trigger on your hand controller to accelerate your car.
- Adjust Speed: The hand controllers feature a power selector to adjust the speed of the cars. This is useful for beginners or for more challenging races. Start with a lower speed setting if you are new to slot car racing.
- Cornering: Reduce speed when approaching corners to prevent cars from derailing. The cars are fitted with strong magnets to help them stay on the track, but excessive speed will still cause them to come off.
- Stopping: Release the trigger to slow down or stop your car.
Image 5.1: Two Micro Hyper-Cars racing on the track, demonstrating typical operation.
6. Maintenance
Regular maintenance ensures the longevity and performance of your slot car set:
- Track Cleaning: Keep the track rails clean and free from dust and debris. Use a clean, dry cloth to wipe the metal rails periodically.
- Car Brushes: The cars use small contact brushes to draw power from the track. If a car is running inconsistently, check these brushes. They may need to be cleaned or replaced with the spare brushes provided. Ensure they are positioned correctly to make good contact with the track rails.
- Storage: When not in use, store the track and cars in a dry, dust-free environment. Disassemble the track carefully to avoid damaging the connectors.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Car not moving or moving intermittently | Loose track connection, dirty track rails, worn/misaligned car brushes, power supply issue. | Check all track connections. Clean track rails. Inspect and adjust/replace car brushes. Ensure power supply is securely plugged in. |
| Car frequently derails on corners | Excessive speed, track not flat, guide flag not properly seated. | Reduce speed when entering corners. Ensure track is on a flat surface. Check that the car's guide flag is fully inserted into the track slot. |
| One car is slower than the other | Worn car brushes, motor issue, debris in car mechanism. | Check and replace brushes on the slower car. Ensure no hair or debris is caught in the car's axles or gears. |
| Controllers not responding | Loose controller connection, power supply issue. | Ensure controllers are firmly plugged into the power base. Verify power supply is working. |
8. Specifications
- Model Number: G1108T
- Scale: 1:64 (HO Scale)
- Track Length: Over 11 feet
- Power Source: Corded Electric
- Number of Players: 2
- Assembly Time: Approximately 10 minutes
- Material: Plastic
- Item Dimensions: 24 x 4 x 16 inches (packaging)
- Item Weight: 3.9 Pounds
- Special Features: Adjustable speed controllers, super resistant vehicles with strong magnets.
Image 8.1: A 1:64 scale slot car, demonstrating its compact size (approximately 70mm in length).
9. Warranty and Support
This Scalextric product comes with a 1 Year Warranty Against Manufacturer Defects. For warranty claims, technical support, or to purchase replacement parts, please contact Scalextric customer service or visit their official website. Keep your proof of purchase for warranty validation.