Moen 6190BN

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Moen Align One-Handle Bathroom Faucet Instruction Manual

Model: 6190BN

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Align One-Handle Modern Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.

The Moen Align Low-Profile Bathroom Faucet features a modern design with simple lines and a contemporary look. It includes a one-handle lever for effortless control of water temperature and volume, and provides a clear laminar stream. This faucet is designed for one-hole mount installations and comes with an optional deckplate for three-hole setups. The LifeShine brushed nickel finish is engineered to resist flaking and corroding. It is also WaterSense certified and ADA compliant.

Product Features

  • Temperature Control: Single-handle lever for easy adjustment of water temperature and volume.
  • Finish: Brushed Nickel finish provides a warm-gray metallic look, designed to resist flaking and corroding.
  • Flexible Design: Suitable for 1-hole or 3-hole installations with the included optional deck plate (escutcheon).
  • WaterSense Certified: Meets EPA WaterSense criteria for water conservation without compromising performance.
  • ADA Compliant: Designed to comply with Americans with Disabilities Act (ADA) specifications for ease of use.
  • Coordinating Collection: Part of the Moen Align Collection, allowing for a cohesive bathroom design.

Included Components

Verify that all components are present before beginning installation.

Diagram showing included faucet components: faucet assembly with supply lines, optional deckplate, aerator cache tool, mounting hardware, lift rod drain assembly, and installation instructions.

Figure 1: Included Components. This diagram illustrates the faucet assembly with attached supply lines, the optional deckplate, an aerator cache tool, mounting hardware, the lift rod drain assembly, and the installation instructions.

  • Bathroom Faucet with attached Supply Lines
  • Optional Deck Plate (Escutcheon)
  • Drain Assembly
  • Installation Hardware
  • Instruction Manual (this document)
  • Aerator Cache Tool

Specifications

AttributeDetail
BrandMoen
Model NameAlign
Model Number6190BN
ColorBrushed Nickel
MaterialMetal (Brass Handle)
Finish TypeBrushed
Mounting TypeDeck Mount
Number of Handles1
Hole Count1 (Optional 3-hole with deckplate)
Spout Height6.35 Inches
Spout Reach5.06 Inches
Maximum Flow Rate1.2 Gallons Per Minute
CertificationWaterSense, ADA Compliant
Item Weight0.32 ounces (approx. 9.07g)
Product Dimensions5 x 2 x 6.38 inches
Diagram showing faucet dimensions: Spout Reach 4.19 inches, Height 6.38 inches. Also notes Maximum Deck Thickness 2.50 inches, Drain Included, Supply Lines Included, Connection Size 3/8 inch, and 1 or 3 Hole Installation.

Figure 2: Faucet Dimensions and Installation Details. This image provides key measurements such as spout reach and overall height, along with information on deck thickness, included components, and connection size.

Diagram showing two sink types, one with a single faucet hole and one with three faucet holes, with text asking 'Will this faucet fit my sink?' and stating 'This faucet fits a one or three hole configuration.'

Figure 3: Sink Compatibility. The Moen Align faucet is designed to fit both single-hole and three-hole sink configurations, with the optional deckplate accommodating the latter.

Setup and Installation

Professional installation is recommended. Before starting, ensure water supply is turned off at the main shut-off valve. Clear the area under the sink and have all necessary tools ready.

Tools Required (Not Included):

  • Adjustable Wrench
  • Phillips Head Screwdriver
  • Plumber's Putty or Silicone Sealant
  • Safety Glasses
  • Flashlight

Installation Steps:

  1. Prepare the Sink: If replacing an existing faucet, remove the old faucet and clean the mounting surface thoroughly. For 3-hole sinks, place the optional deckplate over the holes.
  2. Install Faucet: Insert the faucet body through the mounting hole(s) on the sink or countertop. Ensure the faucet is properly oriented.
  3. Secure Faucet: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank. Tighten the mounting nut securely with an adjustable wrench.
  4. Connect Water Supply Lines: Connect the hot and cold supply lines from the faucet to your home's water supply valves. Use thread sealant tape on the threads for a watertight seal. Ensure connections are tight but do not overtighten.
  5. Install Drain Assembly: Follow the separate instructions provided for installing the lift rod drain assembly into the sink drain hole. Ensure a watertight seal using plumber's putty or silicone sealant. Connect the lift rod to the faucet's lift rod mechanism.
  6. Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks occur, tighten connections as needed.

Operating Instructions

The Moen Align faucet features a single lever handle for easy operation of water flow and temperature.

Close-up of the Moen Align Brushed Nickel Faucet, showing the single lever handle and the spout. Red and blue dots indicate hot and cold water.

Figure 4: Moen Align Faucet in Brushed Nickel. This image highlights the sleek design and the single lever handle for water control.

  • Turning Water On/Off: Lift the lever handle upwards to turn on the water. Push the lever handle downwards to turn off the water.
  • Adjusting Water Volume: The further the lever is lifted, the greater the water flow.
  • Adjusting Water Temperature: Move the lever handle to the left for hot water and to the right for cold water. The central position provides mixed water.
  • Operating the Drain: The faucet includes a lift rod drain assembly. Pull the small rod located at the back of the faucet body upwards to close the drain stopper. Push it downwards to open the drain stopper.

Maintenance and Care

Proper care and maintenance will ensure the long-lasting beauty and performance of your Moen faucet.

  • Cleaning: Clean the faucet regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishes as they can damage the finish. Mild soap and water are generally sufficient.
  • Aerator Maintenance: If water flow becomes restricted, the aerator may be clogged. Use the provided aerator cache tool to remove the aerator. Rinse any debris from the screen and reattach.
  • Finish Protection: The LifeShine finish is designed for durability. To maintain its appearance, wipe the faucet dry after each use to prevent water spots and mineral buildup.

Troubleshooting

ProblemPossible CauseSolution
Low Water FlowClogged aerator; partially closed supply stop; kinked supply line.Clean aerator; fully open supply stop; straighten supply line.
Leaking from SpoutWorn cartridge; debris in cartridge.Replace cartridge; clean cartridge.
Leaking from Base of FaucetLoose mounting nut; improper sealant application.Tighten mounting nut; reapply sealant.
Difficulty Adjusting TemperatureCartridge issue; hot/cold supply lines reversed.Inspect/replace cartridge; verify supply line connections.

Warranty and Support

Moen stands behind its products with a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For detailed warranty information, please refer to the official Moen website or the full user manual PDF.

For technical assistance, replacement parts, or warranty claims, please contact Moen Customer Service. You can also refer to the comprehensive User Manual (PDF) for more in-depth information.

Consider purchasing an extended protection plan for additional coverage beyond the manufacturer's warranty. Options may include 3-Year Protection Plan or 4-Year Protection Plan.

© 2024 Moen Incorporated. All rights reserved.

Moen is a registered trademark of Moen Incorporated.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.