1. Introduction
This manual provides essential information for the safe and efficient operation of your Sangean WR-11SE AM/FM Table Top Radio. Please read these instructions thoroughly before using the unit and retain them for future reference.
The Sangean WR-11SE is a 40th Anniversary Edition Hi-Fi Tabletop Radio featuring vintage styling, an analog AM/FM tuner, and a high-quality 7W speaker with a 3-inch full-range driver.
2. Safety Information
- Power Source: Operate the radio only from the power source indicated on the marking label.
- Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
- Water and Moisture: Do not expose the unit to rain or moisture. Do not use near water.
- Heat: Keep the unit away from heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Cleaning: Unplug the unit from the wall outlet before cleaning. Use a dry cloth for cleaning.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
3. Package Contents
Verify that all items listed below are included in your package:
- Sangean WR-11SE AM/FM Table Top Radio
- Owner's Manual
- 6' Power Cord
4. Product Overview
4.1 Front Panel Controls
The front panel features intuitive controls for easy operation.
Image: Front view of the Sangean WR-11SE radio, showcasing the speaker grille, tuning dial, volume knob, and band selector.
- Volume Knob: Rotate to adjust the audio output level.
- OFF/FM/AM Selector: Turn to power the unit On/Off and select between FM and AM radio bands.
- Tune Knob: Rotate to manually tune to desired radio frequencies.
- LED Tuning Indicator: Illuminates to indicate optimal tuning for a selected station.
4.2 Rear Panel Connections
The rear panel provides various input and output options.
Image: Rear view of the Sangean WR-11SE radio, highlighting the various ports and connections including antenna terminals, auxiliary input, record out, and power input.
- FM-EXT. (75Ω) Terminal: For connecting an external FM antenna.
- AM-EXT. Terminal: For connecting an external AM antenna.
- Internal/External FM Antenna Switch: Selects between the internal FM antenna and an external FM antenna connected to the FM-EXT. terminal.
- AUX IN (3.5mm): Connect external audio devices (e.g., MP3 player, smartphone) for playback through the radio's speaker.
- REC OUT (3.5mm): Provides an audio output for recording the radio's sound.
- Headphone Jack (3.5mm): For private listening with headphones.
- DC 12V/1A Input: For connecting an optional 12V DC power adapter.
- AC IN (120V~60Hz) Socket: For connecting the provided AC power cord.
- Bass Port: Located on the rear, this port enhances bass response. For optimal sound, ensure the radio is not placed directly against a wall.
5. Setup
5.1 Power Connection
Connect the supplied AC power cord to the AC IN socket on the rear panel of the radio and then plug it into a standard 120V~60Hz wall outlet. Alternatively, for DC power, connect an optional 12V/1A DC adapter to the DC 12V/1A input.
5.2 Antenna Connection
The WR-11SE has built-in internal antennas for both AM and FM reception. For improved reception, especially in areas with weak signals, external antennas can be connected.
- FM Antenna: For external FM reception, connect a 75Ω FM antenna to the FM-EXT. terminal. Ensure the Internal/External FM Antenna Switch is set to 'External'.
- AM Antenna: For external AM reception, connect an external AM antenna to the AM-EXT. terminals.
6. Operating Instructions
6.1 Basic Operation
- Power On/Off: Rotate the OFF/FM/AM selector knob to either 'FM' or 'AM' to turn the radio on. Rotate it to 'OFF' to power off the unit.
- Band Selection: Use the OFF/FM/AM selector knob to choose between FM and AM bands.
- Tuning: Rotate the 'Tune' knob to scan for radio stations. The LED Tuning Indicator will illuminate when a strong signal is received.
- Volume Adjustment: Rotate the 'Volume' knob to increase or decrease the sound level.
6.2 Auxiliary Input
To play audio from an external device:
- Connect your external audio device to the 'AUX IN' jack on the rear panel using a 3.5mm audio cable.
- The radio will automatically switch to AUX input mode.
- Adjust the volume using the radio's 'Volume' knob and/or your external device's volume control.
6.3 Record Out
To record audio from the radio:
- Connect a recording device to the 'REC OUT' jack on the rear panel using a 3.5mm audio cable.
- Start playback on the radio and recording on your external device.
6.4 Headphone Output
For private listening, plug headphones into the 'Headphone Jack' on the rear panel. The radio's speaker will automatically mute.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's cabinet. Do not use abrasive cleaners or solvents.
- Wood Cabinet Care: The wooden cabinet can be gently wiped with a slightly damp cloth. Avoid excessive moisture.
- Storage: If storing the radio for an extended period, unplug it from the power source and store it in a cool, dry place.
7.1 Wood Cabinet Manufacturing Process
The wooden cabinet of your Sangean WR-11SE is crafted with precision. The following video illustrates the manufacturing steps involved in creating the radio's wooden enclosure, from cutting and sanding to finishing.
Video: A detailed look at the manufacturing process of the Sangean radio's wooden cabinet, showing various stages of woodworking and finishing.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cord not connected; Power outlet not active. | Ensure power cord is securely connected; Test outlet with another device. |
| Poor FM Reception | Weak signal; Internal antenna not optimally positioned; External antenna not connected or switch incorrect. | Reposition the radio; Connect an external FM antenna and set the switch to 'External'. |
| Poor AM Reception | Weak signal; Interference from electronic devices. | Reposition the radio; Move away from other electronic devices; Connect an external AM antenna. |
| No Sound | Volume too low; Headphones connected. | Increase volume; Disconnect headphones. |
9. Specifications
Image: The Sangean WR-11SE radio with its dimensions (length, width, height) clearly indicated.
- Model: WR-11SE
- Brand: Sangean
- Product Dimensions (L x W x H): 11.5 x 10.5 x 6.5 inches
- Item Weight: 6.75 pounds
- Frequency Range:
- FM: 87.5 - 108 MHz
- AM: 520 - 1710 KHz
- Power Source: Corded Electric
- AC Power: 120V~60Hz
- DC Power: 12V/1A (optional adapter)
- Tuner Technology: AM/FM
- Special Feature: Built-In AM Antenna
- Connectivity Technology: Auxiliary
- Manufacturer: Sangean America, Inc.
10. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your product or contact Sangean America, Inc. directly. Keep your purchase receipt as proof of purchase for warranty claims.
