Bed Head A Wave We Go Tourmaline Ceramic Adjustable Hair Waver Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your Bed Head A Wave We Go Tourmaline Ceramic Adjustable Hair Waver. This versatile styling tool is designed to create a variety of wave styles, from subtle crimps to deep, defined waves, with its unique adjustable barrel mechanism.

Image 1: Bed Head A Wave We Go Hair Waver

2. Important Safety Information

Please read all instructions before using this appliance. Keep away from water. As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

• Always unplug the appliance immediately after using.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• If an appliance falls into water, unplug it immediately. Do not reach into the water.

To reduce the risk of burns, electrocution, fire, or injury to persons:

• This appliance should never be left unattended when plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use an extension cord with this appliance.
• This appliance is hot when in use. Do not let eyes or bare skin touch heated surfaces.
• Do not place the heated appliance directly on any surface while it is operating or cooling.
• The appliance has an automatic shut-off feature for safety.
• This appliance has dual voltage for worldwide use.

3. Product Features

• Custom Styling: Adjustable waver barrel plates allow for different levels of waves, from tousled to defined.
• Tourmaline Ceramic Technology: Helps to boost shine and reduce frizz and damage from over-styling.
• Customizable Wave Depth: An adjustable dial allows you to select the exact level of wave desired:
  • Lower settings for a crimp-style wave.
  • Mid-height adjustment for more defined waves.
  • Highest barrel setting for an ultra-waved outlook.
• Multiple Heat Settings: Digital control with heat settings up to 400°F (204°C) suitable for all hair types.
• Instant Heat Recovery: Ensures consistent results throughout the styling process.
• Travel Ready: Features universal dual voltage for worldwide use.
• Safety Features: Includes auto shut-off for peace of mind and a 6 ft tangle-free swivel cord for ease of use.

Image 2: Angled view of the waver

Image 3: Top view showing the barrels

4. Setup

1. Ensure your hair is clean, dry, and free of tangles.
2. Plug the appliance into an appropriate electrical outlet. The dual voltage feature allows for use in various regions.
3. Turn on the waver and select your desired heat setting using the digital controls. Allow the tool to heat up completely. The instant heat recovery feature ensures consistent temperature.
4. For optimal results and hair protection, apply a heat protectant spray to your hair before styling.

Image 4: Temperature settings guide

5. Operating Instructions

Follow these steps to achieve your desired wave style:

1. Divide your hair into small, manageable sections.
2. Starting at the roots, lightly clamp a small section of hair between the waver's barrels.
3. Hold for a few seconds. The exact duration may vary based on your hair type and desired wave intensity.
4. For continuous waves, release the clamp and reposition the waver. Match the outermost wave created by the previous clamp with the waver's barrel and work it down your hair section.
5. To adjust the wave depth, rotate the adjustable dial located at the tip of the waver. You can adjust this while the tool is hot to create unique textures:
   • Just a Hint: Use lower settings for a subtle, crimp-style wave.
   • Mix Up the Vibe: Adjust to mid-height for more defined bends.
   • Let's Get Deep: Adjust to the highest barrel for an ultra-waved outlook.
6. Repeat the process for all sections of your hair.
7. Once all sections are waved, allow your hair to cool completely before touching or brushing to set the waves.

Image 5: Adjustable dial for wave customization

Image 6: Examples of wave styles

6. Maintenance

• Always unplug the appliance and allow it to cool completely before cleaning.
• Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents.
• Ensure no water or moisture enters the internal components.
• Store the waver in a cool, dry place, out of reach of children. Do not wrap the cord around the appliance.

7. Troubleshooting

8. Specifications

• Model Number: BH336
• Product Dimensions: 12.25 x 2.25 x 2.25 inches
• Weight: 1.3 Pounds
• Material: Ceramic Tourmaline
• Color: Purple
• Heat Settings: Up to 400°F (204°C)
• Cord: 6 ft Tangle-Free Swivel Cord
• Voltage: Dual Voltage (Worldwide Use)
• Safety: Auto Shut-Off

Image 7: Product dimensions

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product at the time of purchase. You may also visit the official Bed Head website for further assistance and contact details.