1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Franke Basis BFG 611-62 Onyx Granit Kitchen Sink. Please read these instructions carefully before beginning installation or use to ensure safe and efficient functionality of your product.
2. Safety Information
Always observe basic safety precautions when installing or maintaining kitchen fixtures. Professional installation is recommended for plumbing and countertop modifications. Ensure all water supply lines are shut off before installation. Wear appropriate personal protective equipment, such as gloves and eye protection, during installation. Do not use abrasive cleaners or harsh chemicals on the sink surface, as this may damage the granite material.
3. Package Contents
The Franke Basis BFG 611-62 Onyx Granit Kitchen Sink package typically includes:
- Franke Basis BFG 611-62 Onyx Granit Kitchen Sink
- Drain assembly components
- Installation clips and seals
Please verify all components are present and undamaged upon unboxing.
4. Setup & Installation
The Franke Basis BFG 611-62 is designed for integrated (top-mount) installation. Accurate measurements and proper countertop cutout are crucial for a secure fit.
4.1 Countertop Preparation
Refer to the technical drawing for precise cutout dimensions. It is recommended to use the provided template (if included) or carefully transfer the dimensions to your countertop material. Ensure the cutout edges are smooth and sealed appropriately to prevent moisture damage.
Detailed technical drawing providing essential dimensions for the installation of the Franke Basis BFG 611-62 kitchen sink. This includes measurements for the sink cutout, bowl dimensions, and overall depth, crucial for proper integration into a countertop.
4.2 Faucet and Accessory Holes
The sink features two pre-marked locations for drilling faucet and eccentric drain control holes. Use appropriate tools for drilling into granite composite material. Exercise caution to avoid chipping or cracking the sink.
4.3 Sink Placement
Apply a bead of silicone sealant around the edge of the countertop cutout. Carefully lower the sink into the opening, ensuring it is properly aligned. Secure the sink using the provided installation clips from underneath the countertop, tightening them evenly to create a watertight seal.
An example of the Franke Basis BFG 611-62 kitchen sink installed in a countertop. Please note that this image shows the sink in Sahara color, not Onyx. It illustrates the general appearance and integration of the sink within a kitchen environment.
5. Operating Instructions
The Franke Basis BFG 611-62 sink is designed for everyday kitchen tasks. Its primary function is to provide a durable and hygienic basin for washing and food preparation.
5.1 Drain Control
The sink is equipped with an eccentric drain control, allowing you to open and close the drain plug without reaching into the water. Rotate the control knob, typically located on the sink's edge, to operate the drain.
This image provides a close-up view of the eccentric drain control knob, which allows for opening and closing the sink's drain remotely. This feature enhances convenience during use.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your Franke granite sink.
6.1 Daily Cleaning
Clean the sink daily with a mild dish soap and a soft cloth or sponge. Rinse thoroughly with clean water and wipe dry to prevent water spots and mineral buildup.
6.2 Stain Removal
For stubborn stains, use a non-abrasive cleaner specifically designed for granite or composite sinks. Avoid using steel wool, abrasive pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products) as these can damage the surface.
6.3 Heat Resistance
While granite composite is highly heat resistant, it is advisable to use a trivet or hot pad for extremely hot pots and pans to prevent potential thermal shock or discoloration over time.
This image displays a detailed view of the Onyx granite material, highlighting its black base color and integrated glimmer particles. This texture is characteristic of the Franke Basis BFG 611-62 sink.
7. Troubleshooting
This section addresses common issues you might encounter with your kitchen sink.
- Water Spots/Mineral Buildup: Regularly wipe the sink dry after use. For existing buildup, use a solution of white vinegar and water, then rinse thoroughly.
- Slow Drainage: Check the drain for food particles or debris. Use a plunger or a non-corrosive drain cleaner if necessary. Avoid harsh chemical drain cleaners.
- Scratches: While granite composite is scratch-resistant, heavy impact or sharp objects can cause marks. Minor surface marks may sometimes be buffed out with specialized granite polish.
- Discoloration: Ensure proper cleaning and avoid leaving highly pigmented foods or liquids in the sink for extended periods.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | FRANKE |
| Model Number | 114.0301.331 |
| Product Dimensions (L x W x H) | 75 x 60 x 30 cm |
| Sink Size | 62 x 50 cm |
| Color | Onyx (Black) |
| Material | Granit (Granite Composite) |
| Installation Method | Integrated (Top-mount) |
| Number of Holes | 2 (for faucet and eccentric control) |
| Weight | 4.99 kg (approx. 11 lbs) |
| Components Included | Franke Basis BFG 611-62 Onyx Granit Kitchen Sink |
9. Warranty & Support
Your Franke Basis BFG 611-62 Onyx Granit Kitchen Sink is covered by the manufacturer's standard warranty. Please refer to the warranty documentation provided with your purchase for specific terms and conditions. For technical assistance, spare parts, or warranty claims, please contact Franke customer support through their official website or the contact information provided in your purchase documentation.
