Feit Electric LEDR56/827 Dimmable LED Retrofit Kit User Manual

1. Product Overview

The Feit Electric LEDR56/827 Dimmable LED Retrofit Kit is an energy-efficient lighting solution designed to replace traditional incandescent bulbs in 5-inch and 6-inch recessed can fixtures. This kit provides 1250 lumens of 2700K soft white light, equivalent to a 120-watt incandescent bulb, while consuming only 20.5 watts. It is fully dimmable and offers instant brightness, with an estimated lifespan of up to 50,000 hours (approximately 45.7 years based on 3 hours/day usage). The kit is Energy Star approved and includes a standard base adapter and a pre-mounted trim for easy installation.

Image 1.1: Packaging for the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, highlighting its 120W equivalent brightness and energy efficiency.

Key Features:

• Energy Efficient: 20.5W power consumption, 120W incandescent equivalent.
• High Brightness: 1250 lumens.
• Color Temperature: 2700K Soft White.
• Dimmable: Fully dimmable for adjustable light levels.
• Long Lifespan: Up to 50,000 hours (45.7 years).
• Compatibility: Fits most 5-inch and 6-inch recessed cans.
• Certifications: Energy Star approved.

2. Safety Information

Before installing or servicing this product, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
• WARNING: Risk of fire. Do not install this product in a luminaire that exceeds the wattage of the bulb.
• This product is for use with 120V, 60Hz circuits.
• Suitable for damp locations.
• Do not use with standard dimmers unless specified as compatible. Use only with dimmers designed for LED products.
• Ensure the recessed can fixture is properly grounded.
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
• Keep away from children.

Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

3. Package Contents

Verify that all components are present before beginning installation.

• 1x LED Retrofit Kit (integrated LED trim)
• 1x Standard Base Adapter (E26 screw-in adapter)

Image 3.1: The LED retrofit kit components, including the main LED light unit and the screw-in adapter.

4. Installation Instructions

This retrofit kit is designed for easy installation into existing 5-inch or 6-inch recessed can housings. No tools are typically required.

1. Turn Off Power: Before starting, ensure the power to the recessed fixture is turned off at the circuit breaker or fuse box to prevent electrical shock.
2. Remove Existing Bulb and Trim: Carefully remove the existing light bulb and any old trim from the recessed can fixture.
3. Screw in Adapter: Screw the provided standard base (E26) adapter into the light socket of the recessed can. Ensure it is securely tightened.
4. Connect Wiring: Locate the orange connector on the LED retrofit kit. Plug this connector into the corresponding connector on the standard base adapter.
5. Insert into Can: Gently push the LED retrofit kit into the recessed can opening. The spring clips on the sides of the LED unit will secure it in place against the ceiling. Ensure the trim is flush with the ceiling.
6. Restore Power: Once the kit is securely installed, restore power at the circuit breaker.
7. Test Light: Turn on the light switch to verify proper operation.

Image 4.1: Detail of the LED retrofit kit, illustrating the spring clips for securing it in the recessed can and the connector for the E26 adapter.

5. Operating Instructions

The Feit Electric LEDR56/827 retrofit kit operates like a standard light fixture but offers dimming capabilities.

Turning On/Off:

Use your existing wall switch to turn the light fixture on or off. The LED will provide instant full brightness.

Dimming Function:

This LED retrofit kit is fully dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired light level. The 2700K Soft White color temperature provides a warm, inviting glow, ideal for living rooms, bedrooms, and dining areas.

Image 5.1: Visual representation of various color temperatures. This product provides 2700K Soft White light.

Image 5.2: A guide to choosing light temperatures, indicating that Soft White (2700K-3000K) is ideal for living rooms and resembles standard incandescent bulbs.

6. Maintenance

The Feit Electric LEDR56/827 LED Retrofit Kit requires minimal maintenance due to its long lifespan and integrated LED design.

• Cleaning: Ensure power is off before cleaning. Wipe the trim and diffuser with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• LED Replacement: The LEDs are integrated and not user-replaceable. The unit is designed for a long operational life. If the LED fails, the entire unit should be replaced.
• Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.

7. Troubleshooting

If you experience issues with your LED retrofit kit, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

According to the product specifications, there is no explicit warranty provided for this item. For technical support or inquiries regarding the Feit Electric LEDR56/827 Dimmable LED Retrofit Kit, please contact Feit Electric customer service.

You can typically find contact information on the manufacturer's official website or on the product packaging.

Feit Electric Website: www.feit.com