Cornat TEC302699 Hood Knob Instruction Manual

1. Product Overview

The Cornat TEC302699 Hood Knob is a replacement handle designed for various fixtures, typically faucets. It features a durable plastic construction with a polished finish, ensuring longevity and resistance to rust. The knob is designed without an inner shell and includes a notched bushing for secure attachment. It also comes with distinct blue and red colored markings to indicate hot and cold water, respectively.

Image 1.1: The Cornat TEC302699 Hood Knob, showcasing its polished surface and the included blue and red temperature indicators.

2. Components Included

The package for the Cornat TEC302699 Hood Knob typically includes the following:

• One (1) TEC302699 Hood Knob (Plastic, Polished finish)
• One (1) Notched bushing (pre-installed or separate, for secure attachment)
• One (1) Blue colored marking (for cold water indication)
• One (1) Red colored marking (for hot water indication)
• Necessary installation hardware (e.g., screws, washers, if applicable for specific models)

3. Installation and Setup

This section provides general instructions for installing the Cornat TEC302699 Hood Knob. Specific installation may vary slightly depending on the fixture type. It is recommended to consult a professional if you are unsure about any steps.

3.1. Preparation

• Ensure the water supply to the fixture is turned off before beginning installation.
• Gather necessary tools, which may include a screwdriver (flathead or Phillips, depending on existing hardware) and a small wrench if removing old components.

3.2. Knob Installation

1. If replacing an old knob, carefully remove the existing handle. This usually involves unscrewing a set screw located on the side or under the handle, then pulling the handle off the valve stem.
2. Align the notched bushing of the new Cornat TEC302699 Hood Knob with the valve stem of your fixture. The notched design ensures a secure and proper fit.
3. Gently push the knob onto the valve stem until it is fully seated. Ensure it is flush and stable.
4. Secure the knob using the provided installation hardware (e.g., set screw). Tighten the screw firmly but do not overtighten, as this can damage the plastic.
5. Insert the blue and red colored markings into their designated slots on the knob. Typically, blue indicates cold water and red indicates hot water.
6. Once the knob is securely installed, slowly turn the water supply back on and check for proper operation and any leaks.

Image 3.1: Illustrative diagram demonstrating the process of attaching the knob to a faucet's valve stem.

4. Operation

The Cornat TEC302699 Hood Knob functions as a control for your fixture. To operate, simply turn the knob in the desired direction to control water flow and temperature. The blue and red markings serve as visual indicators for cold and hot water, respectively, aiding in intuitive use.

5. Maintenance

To ensure the longevity and appearance of your Cornat TEC302699 Hood Knob, follow these simple maintenance guidelines:

• Cleaning: Clean the knob regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the polished plastic finish.
• Rustproof Feature: The knob is designed to be rustproof, ensuring it maintains its appearance and functionality even in humid environments.
• Inspection: Periodically check the knob for any looseness. If it feels wobbly, gently tighten the set screw to secure it.

6. Troubleshooting

This section addresses common issues you might encounter with your Cornat TEC302699 Hood Knob.

7. Specifications

8. Warranty and Support

Information regarding specific warranty terms for the Cornat TEC302699 Hood Knob is not provided in this manual. Please refer to the product packaging or the official Cornat website for detailed warranty information.

For technical support, replacement parts, or further inquiries, please contact Cornat customer service through their official channels. Always provide your product model number (TEC302699) when seeking support.

CORNAT accessories are designed to meet applicable DIN standards and ensure safe and dependable function when professionally installed.