Champion Weather-Resistant Storage Cover User Manual

Introduction

This manual provides essential information for the proper use, installation, maintenance, and storage of your Champion Weather-Resistant Storage Cover. Designed for 15-27-ton Champion Log Splitters, this cover offers protection against various environmental elements, ensuring the longevity and readiness of your equipment.

Please read this manual thoroughly before using the product to ensure safe and effective operation.

Safety Information

Adhering to safety guidelines is crucial when handling and using the storage cover. Failure to follow these instructions may result in damage to the cover or the log splitter, or personal injury.

• The log splitter cover is intended for use only when the log splitter is stationary, not in use, and positioned horizontally.
• Before placing the cover, ensure the log splitter's engine is completely off and both the engine and cylinder are cool to the touch. Placing the cover on a warm or hot engine can cause damage to the cover or pose a fire hazard.
• Never place the cover over a log splitter or its engine if they are warm, turned on, or in use.
• Do not attempt to transport or tow a log splitter with the cover installed on the unit. The cover is designed for stationary storage only.

Setup and Installation

Follow these steps to properly install the storage cover on your log splitter:

1. Ensure your log splitter is turned off, cooled down, and in a stationary, horizontal position.
2. Carefully unfold the Champion Weather-Resistant Storage Cover.
3. Drape the cover over the entire log splitter, ensuring it covers the engine, beam, and log catchers (if present). The cover is designed to accommodate log splitters with or without log catchers.
4. Locate the adjustable drawstring along the bottom edge of the cover.
5. Pull the drawstring firmly to tighten the cover around the base of the log splitter, ensuring a snug and secure fit. This helps prevent wind from lifting the cover and keeps debris out.

Image: The Champion Weather-Resistant Storage Cover securely installed on a log splitter, demonstrating its full coverage.

Image: A close-up view of the adjustable drawstring mechanism on the cover, highlighting its secure closure feature.

Operating and Usage

The Champion Weather-Resistant Storage Cover is designed for long-term outdoor storage, protecting your log splitter from various elements:

• Weather Protection: The tough, water-resistant polyester exterior shields your log splitter from rain, snow, and UV damage from the sun.
• Debris Protection: It effectively keeps out dirt, dust, leaves, cobwebs, and other environmental debris.
• Animal Deterrent: Provides a barrier against birds and small animals that might otherwise nest or cause damage to exposed components.

Image: The product packaging, illustrating the cover's features and its suitability for 15-27 ton log splitters.

Maintenance

To ensure the longevity and effectiveness of your storage cover, regular maintenance is recommended:

• Cleaning: Periodically wipe down the cover with a damp cloth to remove dirt and dust. For more stubborn stains, use mild soap and water, then rinse thoroughly.
• Drying: Allow the cover to air dry completely before folding and storing it, especially if it has been wet. This prevents mold and mildew growth.
• Inspection: Regularly inspect the cover for any signs of wear, tears, or damage. Promptly repair small tears to prevent them from enlarging and compromising the cover's protective capabilities.
• Storage: When not in use, store the cover in a cool, dry place away from direct sunlight to preserve its material integrity.

Troubleshooting

Here are some common issues and their solutions:

• Cover does not fit snugly: Ensure the drawstring is pulled tight and secured. Verify that your log splitter falls within the 15-27 ton range for which this cover is designed.
• Water pooling on cover: Ensure the log splitter is positioned on level ground. Adjust the cover to minimize flat areas where water can collect.
• Cover appears damaged after strong winds: Ensure the drawstring was pulled tight during installation. High winds can stress covers if not properly secured. Inspect for tears and repair as needed.
• Fading or material degradation: While weather-resistant, prolonged exposure to extreme UV can cause some material degradation over many years. Regular cleaning and proper storage when not in use can extend its life.

Specifications

Warranty

This Champion Weather-Resistant Storage Cover is backed by a 1-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

Image: The back of the product packaging, clearly indicating the 1-year limited warranty and other product details.

Support

For technical assistance, warranty inquiries, or general support regarding your Champion product, please contact Champion Power Equipment directly:

• Phone: 1-877-338-0599
• Website: www.championpowerequipment.com

Please have your model number (90054) and proof of purchase ready when contacting support.