TAG Heuer WAU111D.FT6024 Men's Watch Instruction Manual

Introduction

This instruction manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your TAG Heuer WAU111D.FT6024 men's watch. Please read this manual carefully to ensure optimal performance and longevity of your timepiece.

The TAG Heuer WAU111D.FT6024 is a sophisticated chronograph watch featuring a quartz movement, water resistance up to 200 meters, and a durable black strap.

Setup

1. Setting the Time and Date

1. Pull out the crown (located on the right side of the watch case) to position 2.
2. Rotate the crown clockwise or counter-clockwise to set the desired time. Ensure the AM/PM is correctly set for the date change.
3. Pull out the crown further to position 3 to set the date. Rotate the crown to adjust the date.
4. Once the time and date are set, push the crown back in to position 1 to secure it and activate the watch movement.

Image: Front view of the TAG Heuer WAU111D.FT6024 watch, illustrating the dial, crown, and chronograph pushers for time and function adjustments.

2. Adjusting the Strap

The watch features a black rubber strap with a deployment clasp. To adjust the fit, locate the micro-adjustment holes on the clasp or consult a professional jeweler for strap length modification if necessary.

Operating the Chronograph

Your TAG Heuer WAU111D.FT6024 watch is equipped with a chronograph function for measuring elapsed time.

1. Start: Press the upper pusher (A) to start the chronograph. The central second hand will begin to move.
2. Stop: Press the upper pusher (A) again to stop the chronograph. The elapsed time can be read from the sub-dials and the central second hand.
3. Reset: After stopping, press the lower pusher (B) to reset the chronograph hands to their zero positions.
4. Intermediate Time (Split Time): While the chronograph is running, press the lower pusher (B) to measure an intermediate time without stopping the main timing. Press (B) again to catch up to the running time.

Maintenance

1. Cleaning

• Wipe the watch case and strap with a soft, damp cloth. For water-resistant models, a mild soap solution can be used, ensuring the crown is fully pushed in.
• Rinse thoroughly with fresh water and dry with a soft, lint-free cloth.
• Avoid using harsh chemicals, solvents, or abrasive materials.

2. Water Resistance

Your watch is water resistant to 200 meters (20 ATM). This rating is suitable for professional marine activity and serious surface water sports, but not for saturation diving.

• Always ensure the crown is fully pushed in before exposing the watch to water.
• Do not operate the crown or pushers while the watch is submerged in water.
• Water resistance is not a permanent characteristic and may decrease over time due to aging of gaskets or accidental shocks. It is recommended to have the water resistance checked annually by an authorized service center.

3. Battery Replacement

This watch is powered by a quartz battery. When the battery is depleted, the watch will stop or the second hand may jump in 4-second intervals (End-of-Life indicator). Battery replacement should be performed by an authorized TAG Heuer service center to ensure proper sealing and water resistance.

4. Storage

When not wearing your watch for extended periods, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.

Troubleshooting

• Watch not running: Check if the crown is fully pushed in. If the watch is quartz, the battery may need replacement.
• Incorrect time/date: Refer to the "Setting the Time and Date" section. Ensure the crown is fully pushed in after adjustment.
• Condensation under crystal: This may indicate a loss of water resistance. Immediately take the watch to an authorized service center.
• Chronograph hands not resetting to zero: This may require a calibration. Consult an authorized service center.

Specifications

Image: Rear view of the TAG Heuer WAU111D.FT6024 watch, displaying the engraved case back with water resistance and material details.

Warranty and Support

Your TAG Heuer watch is covered by a limited international warranty. Please refer to the warranty card provided with your purchase for specific terms, conditions, and duration.

For service, repairs, or further assistance, please contact an authorized TAG Heuer service center or visit the official TAG Heuer website for support information.

• Official Website: www.tagheuer.com
• Service Center Locator: Refer to the official website for the nearest authorized service center.