Introduction
This manual provides essential information for the safe and effective use of your UPBRIGHT AC/DC Adapter. This adapter is designed to provide power and charge 24V Lithium-Ion batteries found in various electric bikes and scooters, including specific Jetson Beam, Slate, and E-Kick Air models. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Indoor Use Only: This adapter is intended for indoor use in dry locations. Do not expose it to rain, moisture, or extreme temperatures.
- Proper Voltage: Ensure the wall outlet voltage matches the adapter's input voltage (100-240VAC).
- Avoid Overloading: Do not overload the power outlet.
- Cable Care: Do not place heavy objects on the power cord or allow it to be pinched or damaged. Inspect the cord regularly for any signs of wear or damage.
- Disconnect Safely: Always grasp the plug, not the cord, when disconnecting from the power outlet.
- No User Serviceable Parts: Do not attempt to open or repair the adapter. Refer all servicing to qualified personnel.
- Compatibility: Use this adapter only with compatible devices as specified. Using it with incompatible devices may cause damage or safety hazards.
Package Contents
Verify that all items are present in your package:
- UPBRIGHT AC/DC Adapter with Barrel Plug Tip
Image: The UPBRIGHT AC/DC Adapter, showing the main power brick with a standard US two-prong plug and the attached output cable terminating in a barrel connector. A close-up inset highlights the barrel connector tip.
Image: A visual representation of various international plug adapters (AU, EU, UK types) and a sample warranty certificate, indicating potential inclusions for international orders.
Setup
- Verify Compatibility: Before connecting, ensure your device (Jetson Beam, Slate, E-Kick Air electric bike or scooter) requires a 24V Lithium-Ion battery charger with a 29.4V output and a barrel plug tip. Refer to your device's original specifications.
- Connect to Device: Insert the barrel plug tip of the UPBRIGHT AC/DC Adapter firmly into the charging port of your electric bike or scooter.
- Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard 100-240VAC wall power outlet.
- Charging Indication: Observe your device's charging indicator (if available) to confirm that charging has begun.
Image: The UPBRIGHT AC/DC Adapter, highlighting the barrel connector at the end of the output cable, which connects to the device's charging port.
Operating
Once connected, the adapter will automatically begin charging the compatible 24V Lithium-Ion battery. The adapter is designed with safety features such as Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe charging.
- Charging Time: Charging time will vary depending on the battery capacity and its current charge level. Refer to your device's manual for typical charging durations.
- Disconnection: Once the device's battery is fully charged, disconnect the adapter from the wall outlet first, then from the device.
Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid wrapping the cable too tightly around the adapter.
- Inspection: Periodically inspect the adapter and its cables for any signs of damage, such as frayed wires, cracked casing, or bent pins. Discontinue use if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging. |
|
|
| Adapter feels hot during use. |
|
|
Specifications
| Brand | UPBRIGHT |
| Model Number | Jetson Beam Jbeam Power Supply (Compatible with JBEAM-BKB, JEKIK, JEKIK-BKW) |
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 29.4V DC |
| Connector Type | Barrel Connector |
| Compatible Devices | Jetson Beam, Slate, E-Kick Air Electric Bikes/Scooters (24V Lithium-Ion Battery) |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | 4 x 2 x 2 inches |
| Item Weight | 3.84 ounces |
| Certifications | CE, CCC, ROHS |
Warranty and Support
UPBRIGHT products are designed for reliability and performance. This product comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact UPBRIGHT customer support.
For technical assistance or support inquiries, please visit the official UPBRIGHT website or contact their customer service department. Keep your purchase receipt for warranty claims.
UPBRIGHT Store Link: Visit the UPBRIGHT Store on Amazon
