Introduction
This manual provides instructions for the safe and effective use of the Amscan Multicolor Glitter Hair Spray Color. This product is designed for temporary hair coloring, offering a vibrant glitter effect for various occasions.
Setup
Before applying the glitter hair spray, ensure the following:
- Ventilation: Use the product in a well-ventilated area to avoid inhaling vapors.
- Hair Condition: Apply only to dry, styled hair. Do not use on wet, recently dyed, permed, fine, or light blond hair.
- Protection: Protect clothing, countertops, and other surfaces from overspray to prevent staining. You may place a towel around your neck and shoulders.
- Shake Well: Shake the can vigorously for several seconds before each use to ensure proper mixing of the glitter and color.
Operation
Follow these steps for applying the Amscan Multicolor Glitter Hair Spray:
- Prepare: Ensure hair is dry and styled as desired. Protect surrounding areas and clothing.
- Shake: Shake the can well before spraying.
- Position: Hold the can approximately 12 to 18 inches (30 to 45 cm) away from your hair.
- Spray: Press the nozzle and spray evenly over the desired sections of hair. Apply in short bursts for controlled coverage.
- Build Coverage: For a more intense glitter effect, allow the first layer to dry slightly before applying additional layers.
- Drying: The spray dries quickly.

Image: Back of the Amscan Multicolor Glitter Hair Spray can, displaying detailed usage instructions and safety warnings in English, Spanish, and French. This provides essential information for proper application and handling.
Maintenance
This temporary hair color is designed for easy removal and requires minimal maintenance:
- Removal: The glitter hair spray can be easily removed with shampoo and water. Wash hair thoroughly until all glitter is gone.
- Storage: Store the can in a cool, dry place, away from direct sunlight and temperatures exceeding 50°C/120°F.
- Nozzle Care: If the nozzle becomes clogged, rinse it with warm water.
Troubleshooting
- Problem: Glitter is not spraying evenly or nozzle is clogged.
Solution: Shake the can more vigorously before use. If the nozzle is clogged, remove it and rinse thoroughly with warm water. Ensure the can is at room temperature. - Problem: Glitter is not visible enough.
Solution: Apply additional layers, allowing each layer to dry slightly before applying the next, to build up the glitter intensity. Ensure you are holding the can at the recommended distance (12-18 inches). - Problem: Glitter is getting on clothes or surfaces.
Solution: Ensure you are using the product in a well-ventilated area and have adequately protected surrounding surfaces and clothing with towels or coverings. - Problem: Hair feels stiff or sticky.
Solution: You may be applying too much product at once or holding the can too close. Try applying lighter, more even coats from the recommended distance.
Specifications
| Brand | Amscan |
| Model Number | Amscan Multicolor Glitter Hairspray |
| Product Dimensions | 3.6 x 11 x 6.6 inches |
| Item Weight | 4.66 ounces |
| Unit Count | 3.0 Ounce (85g) |
| Color | Multicolor Glitter |
| Item Form | Aerosol Spray |
| Hair Color Permanence | Temporary |
| Material Features | Hypoallergenic |
| Recommended Age | 4 - 12 years |
| UPC | 048419855149 |
| ASIN | B00HHGGKV8 |
Safety Warnings
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USE.
- Contents Under Pressure: Do not puncture, burn, or incinerate the container.
- Flammable: Do not use near flames, pilot lights, or any object that sparks.
- Ventilation: Use only in a well-ventilated area.
- Temperature: Do not store at temperatures exceeding 50°C (120°F). Do not expose to heat or direct sunlight.
- Keep Out of Reach of Children: This product is not a toy.
- Avoid Contact: Do not spray into eyes, nose, or mouth. Causes eye irritation. In case of contact with eyes, flush immediately with plenty of water. If irritation persists, seek medical attention.
- Inhalation Hazard: Deliberately inhaling vapor can be harmful or fatal. Avoid excessive spraying.
- Skin Contact: Avoid prolonged contact with skin. If irritation occurs, wash with soap and water.
- Staining: Excessive spraying may cause temporary staining on surfaces or clothing.
Support and Contact Information
For product support, inquiries, or further assistance, please contact Amscan directly.
- Manufacturer: Amscan Inc.
- Website: www.amscan.com
- Address (USA): AMSCAN INC., Elmsford, NY 10523 USA
- Address (UK): AMSCAN INT. LTD, Milton Keynes, MK10 0DA, UK
- Address (Germany): Amscan Europe GmbH, Dettinger Str. 148, D-73230 Kirchheim/Teck, Germany
- Address (Mexico): Amscan de Mexico, S.A. de C.V., El Salto, Jalisco 45690 Mexico