1. Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your Armitron Men's 20/4952 Diamond Dial Bracelet Watch. Please read this manual thoroughly to ensure proper use and care of your timepiece.
Image 1: Front view of the Armitron 20/4952 watch, showcasing the black dial with gold-tone indices and a genuine diamond at the 12 o'clock position, set in a gold-tone stainless steel case and bracelet.
2. Setup
2.1 Unboxing and Initial Inspection
Upon receiving your watch, carefully remove it from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal and case back.
2.2 Bracelet Adjustment
The stainless steel bracelet may require adjustment to fit your wrist comfortably. This typically involves removing or adding links. It is recommended to have this procedure performed by a qualified jeweler or watch technician to prevent damage to the bracelet or watch.
Image 2: The Armitron 20/4952 watch worn on a wrist, demonstrating the fit of the gold-tone bracelet.
3. Operating Instructions
3.1 Setting the Time
- Locate the crown on the right side of the watch case.
- Gently pull the crown outwards to the time-setting position. You may feel a slight click.
- Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its original position against the watch case. Ensure it is fully seated to maintain water resistance.
Image 3: Side view of the watch, highlighting the crown used for time adjustment.
4. Maintenance
4.1 Cleaning Your Watch
To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For more thorough cleaning, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
4.2 Water Resistance
Your Armitron 20/4952 watch is water resistant to 50 meters (165 feet). This rating makes it suitable for short periods of recreational swimming. It is not suitable for diving, snorkeling, or prolonged water immersion. Always ensure the crown is fully pushed in before any contact with water.
4.3 Battery Replacement
The watch is powered by one LR44 battery (included). When the watch stops running, it indicates the battery needs replacement. Battery replacement should be performed by a professional watch technician to ensure proper sealing and maintain water resistance.
Image 4: Back view of the watch, showing the stainless steel case back where battery access is located.
5. Troubleshooting
- Watch Not Running: Ensure the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
- Inaccurate Time: Check if the crown is fully pushed in. If the issue persists, the watch may require servicing.
- Condensation Under Crystal: This indicates a loss of water resistance. Avoid further contact with water and seek professional servicing immediately.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 20/4952BKGP |
| Movement | Japanese Quartz |
| Case Material | Stainless Steel |
| Case Diameter | 42 mm |
| Dial Window Material | Mineral |
| Band Material | Stainless Steel |
| Water Resistance | 50 meters (165 feet) |
| Battery Type | 1 LR44 (included) |
| Special Feature | Genuine Diamond at 12 o'clock |
7. Safety Information
- Keep the watch away from strong magnetic fields, which can affect timekeeping accuracy.
- Avoid extreme temperature changes.
- Do not attempt to open the watch case or replace the battery yourself, as this may void any warranty and compromise water resistance.
- If you experience any skin irritation from wearing the watch, discontinue use and consult a medical professional.
