parts-quick 2GB DDR2 PC2-6400 800MHz DIMM RAM Instruction Manual

1. Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your parts-quick 2GB DDR2 PC2-6400 800MHz DIMM RAM module. This memory module is designed to enhance the performance of compatible systems, specifically the ASUS P5 Motherboard P5GC-MX 1333. Please read this manual thoroughly before installation to ensure proper functionality and system stability.

2. Product Overview

The parts-quick 2GB DDR2 PC2-6400 800MHz DIMM RAM is a high-quality memory module designed for desktop computers. It features a 240-pin form factor and operates at 1.8V. This Non-ECC Unbuffered DIMM is built to meet industry standards for reliability and performance.

Key Features:

• Capacity: 2GB
• Form Factor: 240-pin DIMM
• Speed: DDR2 PC2-6400 800MHz
• Voltage: 1.8V
• Type: Non-ECC Unbuffered
• Environmental Compliance: Halogen Free, ROHS compliant

Image 1: The parts-quick 2GB DDR2 PC2-6400 800MHz DIMM RAM module. This image displays the green circuit board with black memory chips and a white label indicating the brand and specifications.

3. Setup and Installation

Installing RAM requires careful handling to prevent damage to the module or your motherboard. Always ensure your computer is powered off and unplugged before beginning the installation process.

Safety Precautions:

• Power Off: Completely shut down your computer and unplug it from the power outlet.
• Grounding: Discharge any static electricity by touching a grounded metal object (e.g., the metal casing of your computer) before handling components.
• Handle Carefully: Hold the RAM module by its edges, avoiding contact with the gold connectors or the chips.

Installation Steps:

1. Open Computer Case: Remove the side panel of your computer case to access the motherboard.
2. Locate DIMM Slots: Identify the DDR2 DIMM slots on your ASUS P5 Motherboard P5GC-MX 1333. These are typically long slots with clips on either end. Consult your motherboard manual for exact slot locations if unsure.
3. Open Clips: Gently push the clips at both ends of the DIMM slot outwards to open them.
4. Align RAM Module: Align the notch on the bottom edge of the RAM module with the corresponding key in the DIMM slot. Ensure the module is oriented correctly.
5. Insert RAM: Place the RAM module into the slot and press down firmly and evenly on both ends until the clips snap into place, securing the module. Do not force the module if it does not fit easily; re-check alignment.
6. Close Case: Once the RAM is securely installed, replace the computer case side panel.
7. Power On: Plug in your computer and power it on. The system should automatically detect the new memory.

4. Operating Considerations

Once installed, the RAM module operates automatically with your system. No specific software or drivers are required for its basic function. The system BIOS will detect the installed memory capacity and speed.

Compatibility:

This parts-quick 2GB DDR2 PC2-6400 800MHz DIMM RAM is specifically tested and compatible with the ASUS P5 Motherboard P5GC-MX 1333. While it may work with other DDR2 compatible systems, optimal performance and stability are guaranteed with the specified motherboard.

BIOS Settings:

In most cases, the motherboard's BIOS will automatically configure the RAM settings. If you encounter issues or wish to verify settings, you can access the BIOS/UEFI setup during boot-up (typically by pressing DEL, F2, or F10). Refer to your motherboard's manual for specific BIOS navigation.

5. Maintenance

RAM modules generally require minimal maintenance. However, proper handling and environmental conditions are important for longevity.

• Dust Control: Keep your computer's interior clean and free of dust to ensure proper airflow and prevent overheating of components, including RAM.
• Environmental Conditions: Operate your computer in a stable environment, avoiding extreme temperatures or humidity.
• Handling: If you need to remove or re-install the RAM, follow the safety precautions outlined in the "Setup and Installation" section. Avoid touching the gold contacts.

6. Troubleshooting

If you experience issues after installing the RAM, consider the following troubleshooting steps:

• No Display/Boot Issues:
  • Ensure the RAM module is fully seated in its slot and the clips are locked.
  • Try re-seating the module.
  • If multiple modules are installed, try booting with only the new module, or try the new module in a different slot.
  • Verify that your motherboard supports DDR2 memory and the specific speed (800MHz) and capacity (2GB) of this module.
• System Instability/Crashes:
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic or MemTest86) to check for errors.
  • Ensure your motherboard's BIOS is updated to the latest version, as this can improve memory compatibility.
• Incorrect Memory Reported:
  • Check your system's BIOS/UEFI settings to confirm the detected memory.
  • Ensure your operating system is 64-bit to fully utilize more than 4GB of RAM (if you have multiple modules).
• Still Experiencing Issues? Contact parts-quick technical support for further assistance.

7. Specifications

8. Warranty and Support

This parts-quick memory module is backed by a Lifetime Warranty, ensuring long-term reliability and peace of mind. In the event of any issues or for technical assistance, please contact parts-quick customer support.

Contact Information:

• Technical Support: Toll-Free support is available. Please refer to the parts-quick website or product packaging for current contact details.
• Website: www.parts-quick.com (Example link, actual link not provided in data)