duxtop BT-M20B
Duxtop 1800W Portable Induction Cooktop
Model: BT-M20B
Introduction
The Duxtop 1800W Portable Induction Cooktop is a versatile and efficient countertop burner designed for various cooking needs. Utilizing induction technology, it provides rapid heating and precise temperature control, making cooking faster and more energy-efficient than traditional methods. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your new appliance.

Figure 1: Duxtop 1800W Portable Induction Cooktop
Setup
Unpacking and Placement
Carefully remove the cooktop from its packaging. Place the unit on a dry, stable, and level surface. Ensure adequate ventilation around the cooktop. Avoid placing the unit directly on steel surfaces to prevent interference with induction operation.
Power Connection
The Duxtop induction cooktop operates on a standard 120V/60Hz, 15 amp electrical outlet, common in North American homes. Ensure the power cord is securely plugged into a grounded outlet.
Cookware Compatibility
Induction cooktops require cookware with a magnetic bottom. To test compatibility, simply place a magnet on the bottom of your pot or pan. If the magnet sticks securely, the cookware is compatible. A minimum diameter of 5 inches is recommended for optimal performance.

Figure 2: Cookware Compatibility Test
Operating Instructions
Control Panel Overview
The cooktop features an intuitive digital control panel with an LED display for easy operation and viewing.

Figure 3: Easy Control Panel
Power and Temperature Settings
Choose from 15 preset power levels ranging from 200 to 1800 Watts, or 15 preset temperature settings from 140°F to 460°F. The cooktop boasts an 83% energy efficiency rating, ensuring quick heat-up and faster cooking times.

Figure 4: Adjustable Power and Temperature Settings
Digital Timer
The built-in count-down digital timer can be set for up to 170 minutes in 1-minute increments. The cooktop will automatically shut off once the timer expires.

Figure 5: Automatic 170 Minutes Timer
Safety Features
The cooktop includes several safety features:
- Auto-Pan Detection: The unit will automatically shut off after 60 seconds if no compatible cookware is detected or if the cookware is removed.
- Over-Heat Protection: Prevents overheating with a diagnostic error message system.
- Low and High Voltage Warning System: Alerts users to unstable power supply conditions.
Understanding Induction Technology
Induction cooking generates heat directly within the cookware itself through electromagnetic fields, rather than heating the cooktop surface. This process is highly energy-efficient and safer, as there is no open flame or hot heating element. Spills will not burn or stick to the cooktop surface, making cleanup easier.
Maintenance and Care
To ensure the longevity and optimal performance of your Duxtop induction cooktop, follow these simple cleaning guidelines:
- Cleaning the Cooktop Surface: With no open flame or hot cooking element, spills will not burn or stick to the cooktop surface. Simply wipe the oversized glass cooktop with a damp towel after each use.
- Cooling Before Handling: The cooktop surface may be hot after use due to contact with hot cookware. Always allow the unit to cool completely before handling or cleaning.
- General Cleaning: For stubborn stains, use a mild non-abrasive cleaner specifically designed for glass cooktops. Avoid harsh chemicals or abrasive scrubbing pads that could scratch the surface.
Troubleshooting
If you encounter any issues with your Duxtop induction cooktop, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| "Pot" Error Code Displayed | No cookware detected or incompatible cookware. | Ensure compatible cookware with a magnetic bottom is placed on the cooktop. The minimum diameter should be 5 inches. |
| Cooktop Shuts Off Unexpectedly | Overheating or unstable voltage. | Allow the unit to cool down. Check the power supply for low or high voltage warnings. Ensure proper ventilation. |
| Unit Does Not Turn On | No power or loose connection. | Verify the power cord is securely plugged into a working outlet. Check the circuit breaker. |
For issues not listed here or if problems persist, please contact Duxtop customer service for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BT-M20B |
| Color | Black |
| Material | Glass, Acrylonitrile Butadiene Styrene |
| Power Source | Induction |
| Wattage | 1800 watts |
| Voltage | 120 Volts |
| Heating Elements | 1 |
| Controls Type | Push Button |
| Product Dimensions | 12.7"D x 16.3"W x 3.8"H |
| Item Weight | 6.2 Pounds |
| UPC | 820103739092 |
Warranty and Support
For detailed warranty information, please refer to the official user manual provided with your product or visit the Duxtop website. If you have any questions, require technical support, or need assistance with your Duxtop induction cooktop, please contact customer service.
Official User Manual (PDF): Download Here
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.