1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your TRIXIE Natura 55806 Bird Feeder with Stand. Please read these instructions carefully before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.
2. Safety Information
- Ensure all parts are securely fastened during assembly to prevent instability.
- Place the bird feeder on a level, stable surface to prevent tipping.
- Regularly inspect the feeder for any damage or loose components. Repair or replace as necessary.
- Keep small children and pets away from the assembly area to avoid injury.
- Do not climb on or hang from the bird feeder.
3. Package Contents
Please verify that all components are present before beginning assembly:
- Bird Feeder House (1 unit)
- Main Stand Pole (1 unit)
- Stand Legs (3 units)
- Assembly Hardware (screws, bolts, nuts - quantity as required)
- Instruction Manual (this document)
4. Assembly Instructions
Follow these steps to assemble your TRIXIE Natura Bird Feeder:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
- Assemble Stand Legs: Attach the three stand legs to the base of the main stand pole using the provided hardware. Ensure they are securely fastened and form a stable tripod base.
- Attach Feeder House to Pole: Carefully place the bird feeder house onto the top of the main stand pole. Secure it using the designated screws or bolts, ensuring it is centered and stable.
- Final Check: Once assembled, gently shake the feeder to confirm all connections are tight and the structure is stable.
Figure 1: Fully assembled TRIXIE Natura 55806 Bird Feeder with Stand. This image displays the feeder with its red wooden stand and a red and white roof, filled with birdseed. The dimensions are approximately 46 x 22 x 44 cm for the feeder house, with a total height of 1.15 m including the stand.
5. Usage Guidelines
- Placement: Position the feeder in a quiet, sheltered location, away from strong winds and predators. Ensure it is easily accessible for refilling and cleaning.
- Filling: Lift the roof or access panel to fill the feeder tray with appropriate birdseed. The large landing area allows multiple birds to feed comfortably.
- Birdseed Type: Use high-quality birdseed suitable for local bird species. Avoid using moldy or spoiled food.
6. Care and Maintenance
Regular maintenance will extend the life of your bird feeder and ensure a healthy environment for birds:
- Cleaning: Clean the feeder regularly (at least once a month, more often during wet weather or high usage) to prevent the spread of disease. Remove old seed, scrub the feeder with a mild soap and water solution, rinse thoroughly, and allow it to dry completely before refilling.
- Wood Care: The feeder is made from glazed pine and treated with a special varnish for winter and weather protection. Periodically check the wood for signs of wear or damage. Reapply a non-toxic, weather-resistant wood sealant if necessary to maintain its protective properties.
- Roofing Felt: Inspect the mineral surface roofing felt for any damage or lifting. Ensure it remains intact to provide adequate protection from rain and snow.
7. Troubleshooting
- Feeder Tipping: Ensure the stand is placed on a firm, level surface. If the ground is soft, consider anchoring the legs or placing heavy stones on the leg bases for added stability.
- Food Getting Wet: Verify the roof is properly positioned and intact. The roof overhang is designed to protect the food. If heavy rain or wind causes issues, consider relocating the feeder to a more sheltered spot.
- Pests: If squirrels or other pests are an issue, consider adding a baffle to the stand pole below the feeder house.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | TRIXIE |
| Model Number | 4011905558066 |
| Product Dimensions (Feeder House) | 46 x 22 x 44 cm |
| Total Height (with Stand) | 1.15 m |
| Item Weight | 1 Kilogram |
| Material | Glazed Pine Wood, Mineral Surface Roofing Felt |
| Color | Multicoloured (Red/White) |
| Mounting Type | Pole holder |
9. Warranty and Customer Support
For information regarding warranty coverage or if you require assistance with your TRIXIE Natura Bird Feeder, please contact your retailer or the official TRIXIE customer support channels. Please have your model number (55806) and purchase details available when contacting support.
For more information about TRIXIE products, visit the official TRIXIE website: www.trixie.de
