Introduction
This manual provides comprehensive instructions for the safe and efficient operation, assembly, and maintenance of your Lasko 18" Oscillating Pedestal Fan, Model 1827. Please read this manual thoroughly before use and retain it for future reference.
Image: The Lasko 18-inch Pedestal Fan effectively circulating air within a living space, demonstrating its cooling capability.
Important Safety Information
Your Lasko Pedestal Fan is designed with safety in mind. It is ETL listed and equipped with Lasko's safety fuse technology and a BLUE Plug for enhanced protection.
- Always plug the fan directly into a wall outlet. Never use with an extension cord.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area where it will not be tripped over.
- Unplug the fan from the outlet when not in use or when moving it.
- Do not insert fingers or foreign objects into any ventilation or exhaust opening.
Image: Close-up of the Lasko fan's Blue Plug, highlighting its integrated safety fuse technology.
Package Contents
Upon opening the package, ensure all components are present and undamaged. The Lasko Pedestal Fan typically includes the following:
- Fan Head Assembly (motor, blades, front and rear grilles)
- Adjustable Height Pole
- Round Base
- Base Screw/Nut
- User Manual
Image: All components of the Lasko Pedestal Fan laid out, ready for assembly.
Setup and Assembly
Assembly of the Lasko Pedestal Fan is straightforward and requires no tools. Follow these steps:
- Attach the adjustable height pole to the round base using the provided screw/nut. Ensure it is securely tightened.
- Secure the fan head assembly to the top of the adjustable pole.
- Ensure all connections are firm before plugging the fan into a power outlet.
Image: Illustration demonstrating the adjustable height feature of the fan's pole.
Operating Instructions
Your Lasko Pedestal Fan offers multiple settings for optimal comfort:
- Power On/Off: Use the rotary switch located on the fan head to turn the fan on or off.
- Speed Settings: Select from 3 energy-efficient speeds (1, 2, 3) using the rotary switch to adjust airflow intensity.
- Oscillation: To activate the 60-degree oscillation feature, press down the oscillation knob located on the top rear of the motor housing. Pull the knob up to stop oscillation.
- Adjustable Tilt: The fan head can be tilted up or down to direct airflow precisely where needed.
- Adjustable Height: The fan's height can be adjusted from 38" to 54.5" by loosening the collar on the pole, adjusting the height, and then tightening the collar.
Image: Visual representation of the fan's control panel and adjustable features.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan:
- Always unplug the fan before cleaning.
- Use a soft cloth to gently wipe the exterior surfaces of the fan.
- To clean the fan blades, carefully remove the front grille (refer to assembly instructions for reverse steps). Wipe blades with a damp cloth. Ensure blades are completely dry before reattaching the grille.
- Do not use abrasive cleaners or chemicals.
- The motor is permanently lubricated and requires no oiling.
Troubleshooting
If your fan is not operating as expected, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power to the unit; Safety fuse tripped. | Ensure fan is plugged into a working electrical outlet. Check household circuit breaker/fuse. If equipped with a BLUE Plug, check the fuse in the plug. |
| Airflow is weak | Fan speed setting is too low; Grilles or blades are dirty. | Increase fan speed. Clean fan grilles and blades as per maintenance instructions. |
| Fan is noisy | Loose parts; Fan not on a level surface. | Check for loose screws or components and tighten them. Place fan on a firm, level surface. |
Specifications
- Brand: Lasko
- Model Name: 1827
- Color: Black
- Electric Fan Design: Floor Fan
- Power Source: Corded Electric
- Product Dimensions: 20.5"D x 20.5"W x 54.5"H
- Room Type: Bedroom, Living Room, Home Office
- Special Features: Adjustable Height, Adjustable Tilt, 60-degree Oscillation
- Number of Speed Settings: 3
- Noise Level: 61.6 dB
- Wattage: 114 watts
- Number of Blades: 5
- Blade Length: 18 Inches
- Item Weight: 8.02 Pounds
- Indoor/Outdoor Usage: Indoor
- Assembly Required: Yes (No tools required)
- Cable Length: 6 Feet
- Control Method: Rotary Switch
Warranty and Support
Your Lasko Pedestal Fan is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in material or workmanship under normal use.
For warranty claims, technical support, or replacement parts, please contact Lasko Customer Service:
- Website: www.lasko.com
- Phone: Refer to Lasko's official website for current contact numbers.
Please have your model number (1827) and proof of purchase available when contacting support.
