Power Stop 16-1585
Power Stop 16-1585 Z16 Evolution Rear Ceramic Brake Pads User Manual
Brand: Power Stop | Model: 16-1585
Product Overview
Professional technicians prefer Evolution ceramic pads for problem free installations and no come-backs. Power Stop brake pads are engineered for noise free braking with dual rubber backed shims that offer 6 times more noise reduction than plain steel shims. The pad surfaces are thermal scorched for fast break-in. Evolution pads feature a true ceramic formula that keeps wheels cleaner and won't wear-out the rotors. Power Stop pads have 20 percent more stopping power. The premium carbon-ceramic compound is made using OE positive mold technology, that assures a uniform friction density throughout the pad and this helps control noise and premature wear. Evolution pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots.
Image: Power Stop Z16 Evolution Ceramic Brake Pads, showing the product packaging and the brake pads themselves.
Setup and Installation
Installation of brake pads should be performed by a qualified technician. Ensure the vehicle is safely lifted and supported. Always refer to your vehicle's service manual for specific torque specifications and procedures.
- Inspect all brake components for wear or damage. Replace rotors if necessary.
- Clean caliper and mounting hardware thoroughly.
- Apply appropriate brake lubricant to caliper slide pins and contact points.
- Install new Power Stop Z16 Evolution Ceramic Brake Pads, ensuring proper fitment and orientation.
- Reassemble the brake system, tightening all fasteners to manufacturer specifications.
Image: A technician's hands carefully installing a new brake pad onto a vehicle's brake rotor and caliper assembly.
Image: A complete set of four Power Stop Z16 Evolution Ceramic Brake Pads, along with new brake hardware components.
Operating Instructions: Brake Pad Break-in Procedure
Proper break-in of new brake pads is crucial for optimal performance and longevity. This procedure ensures an even layer of friction material is deposited onto the rotors, preventing issues like judder and maximizing stopping power.
Video: Official Power Stop Brake Pad Break-in Procedure. This video demonstrates the recommended steps for properly bedding in your new brake pads and rotors.
Break-in Steps:
- Initial Stops (5 moderate to aggressive): From 40 mph, make 5 moderate to aggressive stops down to 10 mph in rapid succession. Do not let the brakes cool between stops. Do not come to a complete stop. If forced to stop, shift to neutral and take your foot off the brake, or allow the vehicle to roll slightly. This prevents imprinting the pad material onto the hot rotor, which can cause judder.
- Second Set of Stops (5 moderate): Immediately after the initial stops, make 5 moderate stops from 35 mph down to 5 mph in rapid succession. Again, do not let the brakes cool. You may notice a smell of resin as the brakes heat up; this is normal.
- Cooling Period: After completing the stops, drive the vehicle for at least 5 minutes at moderate speed without excessively heating the brakes and without coming to a complete stop. This allows the heated resin in the brake pads to cool and cure, ensuring an even transfer layer.
- Normal Operation: Once the brakes have cooled to standard operating temperature, you may use them normally. Never cool your brakes with water, as this can damage them.
Following this procedure will ensure optimal performance and longevity of your Power Stop Z16 Evolution Ceramic Brake Pads.
Maintenance
Regular maintenance is essential for the safe and efficient operation of your vehicle's braking system. Power Stop Z16 Evolution Ceramic Brake Pads are designed for durability and low dust, but periodic checks are still recommended.
- Regular Inspection: Inspect brake pads, rotors, and calipers at least once a year or every 12,000 miles, whichever comes first. Look for uneven wear, cracks, or excessive rust.
- Brake Fluid Check: Check brake fluid level and condition regularly. Consult your vehicle's manual for recommended fluid type and replacement intervals.
- Cleanliness: While Z16 Evolution pads are low-dust, occasional cleaning of wheels can help maintain their appearance.
- Professional Service: Any significant changes in brake performance (e.g., noise, vibration, reduced stopping power) should prompt immediate professional inspection.
Image: A visual comparison demonstrating the low-dust benefits of Power Stop brake pads, showing a wheel with significant brake dust versus a clean wheel.
Troubleshooting
If you experience any issues with your Power Stop Z16 Evolution Ceramic Brake Pads, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Squealing/Grinding Noise | Improper break-in, worn pads, missing shims, foreign object, worn rotors. | Re-perform break-in procedure, inspect pads for wear, check for proper shim installation, remove debris, inspect/replace rotors. |
| Vibration/Pulsation | Rotor run-out, uneven pad material transfer, warped rotors. | Ensure proper break-in, inspect rotors for warping or excessive run-out. Resurface or replace rotors if necessary. |
| Reduced Stopping Power | Improper break-in, air in brake lines, worn pads, contaminated pads. | Perform break-in procedure, bleed brake lines, inspect pads for wear, check for fluid leaks or contamination. |
If issues persist after attempting these solutions, consult a certified automotive technician.
Specifications
| Feature | Detail |
|---|---|
| Brand | Power Stop |
| Model Number | 16-1585 |
| Material | Ceramic |
| Auto Part Position | Rear |
| Vehicle Service Type | Car (Honda Pilot 2012-2015) |
| Specification Met | OEM |
| Item Weight | 2.56 pounds |
| Product Dimensions | 6.6 x 4.6 x 2 inches |
| Included Components | Brake Pads - OE |
Warranty Information
Specific warranty details for Power Stop 16-1585 Z16 Evolution Rear Ceramic Brake Pads are typically provided with the product packaging or can be found on the official Power Stop website. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your Power Stop Z16 Evolution Ceramic Brake Pads, please visit the official Power Stop website or contact their customer service department. Contact information can usually be found on the product packaging or their website.
Online Resources: Power Stop Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.