1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the BFT THALIA P BTL2 control panel. The THALIA P BTL2 is an advanced application control panel designed for managing one or two 24V swing gate operators.
It features a single-phase 230V power board and supports 24VDC operators with a maximum power of 240W per operator. Key functionalities include removable terminals for easy wiring, simplified programming via a dual-channel display, an integrated receiver, and an anti-crushing system based on D-Track technology. The panel also supports electronic opening and closing deceleration, and self-learning capabilities for optimal gate movement.
2. Product Overview
The BFT THALIA P BTL2 control panel is engineered for reliable and safe operation of swing gates. Its robust design and intelligent features ensure efficient gate automation.
Figure 1: Internal view of the BFT THALIA P BTL2 Control Panel. The image displays the grey enclosure with the front cover open, revealing the main circuit board, a large transformer, and various colored terminal blocks for electrical connections. Wires are neatly routed within the panel.
Key Features:
- Supports 1 or 2 swing gate operators (24VDC, 240W max per operator).
- Single-phase 230V power supply.
- Removable terminals for simplified wiring.
- Dual-channel display for easy programming.
- Integrated radio receiver.
- D-Track anti-crushing system for enhanced safety.
- Electronic deceleration for smooth opening and closing.
- Self-learning function for automatic parameter setting.
- Automatic locking and quick closing functions.
- Direct connection for electric lock and electromagnet.
3. Setup and Installation
Installation of the BFT THALIA P BTL2 control panel should only be performed by qualified personnel, adhering to all local electrical codes and safety regulations.
3.1. Safety Precautions
- Always disconnect main power before performing any installation or maintenance.
- Ensure proper grounding of the control panel and gate operators.
- Install safety devices such as photocells and safety edges as required by regulations.
- Do not modify the control panel or its components.
3.2. Mounting the Control Panel
- Select a suitable location near the gate, protected from direct weather exposure and easily accessible for maintenance.
- Mount the control panel securely to a vertical surface using appropriate fasteners. Ensure it is level.
3.3. Electrical Connections
Refer to the wiring diagram provided with the product for precise connections. Use the removable terminals for ease of wiring.
- Main Power Supply: Connect the 230V single-phase power supply to the designated terminals.
- Operator Connections: Connect the 24VDC gate operators to their respective terminals. Ensure correct polarity.
- Safety Devices: Connect photocells, safety edges, and emergency stop buttons to the appropriate safety inputs.
- Accessories: Connect any additional accessories such as flashing lights, keypads, or electric locks.
3.4. Initial Programming and Self-Learning
After all connections are made, power on the unit. Use the dual-channel display to navigate the programming menu. The self-learning function will automatically detect the gate's travel limits and set optimal operating parameters. Follow the on-screen prompts for this process.
4. Operating Instructions
The BFT THALIA P BTL2 control panel offers various modes of operation. Ensure the area around the gate is clear before activating any movement.
4.1. Standard Operation
- Remote Control: Press the assigned button on your remote control to open or close the gate. A second press during movement will stop the gate.
- Push-Button Control: If a wired push-button is installed, a momentary press will initiate gate movement (open/close/stop cycle).
4.2. Automatic Locking and Quick Closing
The panel can be configured for automatic locking after closing and quick closing, where the gate closes automatically after a set time or after passing a safety device.
4.3. Partial Direct Operation
This function allows for partial opening of the gate, typically for pedestrian access. Consult the programming menu for activation and adjustment.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your BFT THALIA P BTL2 control panel and gate system. Perform these checks periodically.
5.1. General Checks (Monthly)
- Power Disconnection: Always disconnect power before any physical inspection.
- Cleanliness: Keep the control panel enclosure clean and free from dust, debris, and insects.
- Wiring: Check all electrical connections for tightness and signs of wear or corrosion.
- Safety Devices: Test photocells and other safety devices to ensure they are functioning correctly.
- Gate Movement: Observe the gate's movement for any unusual noises, jerky motions, or obstructions.
5.2. Professional Inspection (Annually)
It is recommended to have a qualified technician inspect the entire gate automation system annually to ensure optimal performance and safety compliance.
6. Troubleshooting
This section provides solutions to common issues you might encounter with your BFT THALIA P BTL2 control panel. For complex problems, contact a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Gate does not move. | No power supply; Safety device activated; Remote control battery low; Motor fault. | Check power connection and circuit breaker; Inspect safety devices for obstructions or misalignment; Replace remote battery; Consult technician for motor issues. |
| Gate stops unexpectedly. | Obstruction detected by D-Track system; Safety device triggered; Overheating. | Remove any obstructions; Check and clean safety devices; Allow unit to cool down if overheated. |
| Remote control not working. | Battery dead; Remote not programmed; Signal interference. | Replace battery; Re-program remote control (refer to programming guide); Check for sources of interference. |
| Gate opens partially. | Partial opening function activated; Travel limits incorrectly set. | Check programming for partial opening settings; Re-run self-learning procedure to reset travel limits. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | THALIA P BTL2 |
| Product Model Number | BTL2 |
| Brand | BFT |
| Manufacturer | FIN.DEA S.P.A. BFT SPA |
| Power Supply | 230V Single-phase |
| Operator Output | 24VDC, 240W max per operator |
| Max Supported Devices | 2 (operators) |
| Product Weight | 5 kg |
8. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized BFT dealer. BFT products are designed for durability and performance.
For technical support, spare parts, or professional assistance, please contact your local BFT service center or visit the official BFT website. Ensure you have your product model number (BTL2) and serial number ready when seeking support.
