Maxell 190560

Maxell EB-95 Stereo Earbuds User Manual

Model: 190560

Introduction

This manual provides essential information for the proper use and care of your Maxell EB-95 Stereo Earbuds. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Maxell EB-95 Stereo Earbuds with 3.5mm L-plug connector

Image: Maxell EB-95 Stereo Earbuds, showing the black earbud units and the angled 3.5mm audio jack. The Maxell logo is visible on one of the earbud stems.

Product Overview

The Maxell EB-95 Stereo Earbuds are designed for use with a variety of portable audio devices. They feature a lightweight, plastic design for comfortable, extended use and deliver dynamic sound reproduction.

Key Features:

  • Connectivity: Wired, 3.5mm Silver-Plated L-Plug connector.
  • Design: Lightweight plastic earbud design.
  • Compatibility: Ideal for smartphones, tablets, laptops, MP3 players, CD players, and other portable stereo devices.
  • Audio: Dynamic sound reproduction.

Setup

Setting up your Maxell EB-95 earbuds is straightforward:

  1. Unpack: Carefully remove the earbuds from their packaging.
  2. Identify Connector: Locate the 3.5mm L-Plug connector at the end of the earbud cable.
  3. Connect to Device: Insert the 3.5mm L-Plug connector firmly into the audio jack of your desired device (e.g., smartphone, tablet, laptop, MP3 player). Ensure the connection is secure.
  4. Position Earbuds: Place the left earbud (marked 'L') into your left ear and the right earbud (marked 'R') into your right ear. Adjust for a comfortable fit.

Operating Instructions

Once connected, your Maxell EB-95 earbuds are ready for use:

  • Audio Playback: Begin playing audio from your connected device. The sound will be routed through the earbuds.
  • Volume Control: Adjust the volume directly on your connected audio device. The EB-95 earbuds do not feature inline volume controls.
  • Disconnection: To disconnect, gently pull the 3.5mm L-Plug connector straight out from your device's audio jack. Avoid pulling on the cable itself to prevent damage.

Note: Prolonged listening at high volumes can cause hearing damage. It is recommended to listen at moderate volume levels.

Maintenance and Care

Proper maintenance will extend the life of your earbuds:

  • Cleaning: Gently wipe the earbuds with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use, store the earbuds in a clean, dry place, away from extreme temperatures and direct sunlight. Avoid tangling the cable.
  • Handling: Always grasp the plug when connecting or disconnecting from a device. Avoid bending or sharply creasing the cable.
  • Moisture: Keep the earbuds away from water and excessive moisture. They are not waterproof.

Troubleshooting

If you encounter issues with your Maxell EB-95 earbuds, refer to the following common solutions:

ProblemPossible CauseSolution
No sound from earbuds.
  • Cable not fully inserted.
  • Device volume too low or muted.
  • Incorrect audio output selected on device.
  • Damaged cable or connector.
  • Ensure the 3.5mm plug is fully inserted into the device's audio jack.
  • Increase the volume on your device. Check if the device is muted.
  • Verify that the audio output setting on your device is set to headphones/external speakers.
  • Try the earbuds with another device. If the problem persists, the earbuds may be damaged.
Sound is distorted or crackling.
  • Loose connection.
  • Audio source quality is poor.
  • Damaged cable or earbud driver.
  • Re-insert the 3.5mm plug firmly.
  • Try a different audio file or source.
  • Inspect the cable for visible damage. If damaged, replacement may be necessary.
Sound only from one earbud.
  • Partial plug insertion.
  • Device audio balance settings.
  • Damaged earbud or cable.
  • Ensure the 3.5mm plug is fully inserted.
  • Check your device's audio settings for balance control and ensure it's centered.
  • Try with another device. If the issue persists, one earbud or its wiring may be damaged.

Specifications

FeatureDetail
Model NameEB-95
Model Number190560
BrandMaxell
Connectivity TechnologyWired
Headphones Jack3.5 mm Jack (L-Plug)
Earpiece ShapeBud
MaterialPlastic
ColorBlack
Frequency Range20Hz-23kHz
Item Weight18.14 g (0.64 ounces)
UPC025215190247

Warranty and Support

For warranty information or technical support regarding your Maxell EB-95 Stereo Earbuds, please refer to the official Maxell website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Maxell Official Website: www.maxell.com

Please note that warranty terms and support availability may vary by region.

© 2023 Maxell. All rights reserved.

This manual is for informational purposes only. Maxell reserves the right to make changes to product specifications without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.