ICC Joint Cover Instruction Manual

Product Overview

The ICC Joint Cover (Model ICC-ICRW11JCWH) is designed to provide a clean, secure, and aesthetically pleasing finish for raceway installations. This 3/4-inch white joint cover is suitable for managing Cat 5e, Cat 6, voice, and fiber cables, ensuring a professional appearance while protecting cable connections.

Key features include:

• Joint Cover Raceway Fitting
• 3/4 (.75) Size
• Adhesive Backing for Secure Placement
• Designed for Cat 5E, Cat 6, Voice, and Fiber Cable
• Vinyl Material, Paintable to Match Decor
• Can be Cut and Trimmed for Custom Applications
• Supplied in 10-piece packs

Setup and Installation

This section provides instructions for the proper installation of the ICC Joint Cover.

Preparation

• Ensure the raceway surface is clean, dry, and free of dust or debris.
• Measure the required length of the joint cover. The vinyl material can be cut and trimmed using standard cutting tools if a custom length is needed.

Application

1. Carefully peel off the protective backing from the adhesive strip on the joint cover.
2. Align the joint cover precisely over the raceway joint or desired area.
3. Press firmly along the entire length of the joint cover to ensure the adhesive makes full contact with the surface. Apply even pressure to secure a permanent bond.
4. For optimal adhesion, avoid repositioning the cover once applied.

Image: A single white ICC Joint Cover, showing its U-shaped profile and smooth finish. This component is designed to seamlessly cover raceway joints, providing a clean and finished appearance for cable management systems.

Operating Instructions

The ICC Joint Cover is a passive component designed for cable management and aesthetic finishing. It does not require active operation. Once installed, its function is to protect and conceal cable joints within a raceway system.

Maintenance

The joint cover requires minimal maintenance.

• Cleaning: Wipe the surface with a soft, damp cloth to remove dust or dirt. Avoid abrasive cleaners that may damage the vinyl finish.
• Painting: If desired, the vinyl material can be painted to match the surrounding decor. Ensure the surface is clean and dry before painting. Use paints suitable for vinyl or plastic surfaces.

Troubleshooting

If you encounter issues during or after installation, consider the following:

• Adhesive Not Sticking: Ensure the surface was thoroughly cleaned and dry before application. Dust, grease, or moisture can prevent proper adhesion. Re-clean the surface and apply a new joint cover if necessary, as the adhesive is designed for permanent placement.
• Improper Fit: Verify that the joint cover size (3/4 inch) matches your raceway system. The cover can be trimmed if minor adjustments are needed for length.
• Appearance Issues: If the cover appears uneven or misaligned, it may be due to improper initial placement. The adhesive provides a permanent bond, so careful alignment during the first application is crucial.

Specifications

Warranty Information

This ICC Joint Cover comes with a 30-Day Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for any warranty claims.

Support and Contact

For further assistance, technical support, or inquiries regarding the ICC Joint Cover, please visit the official ICC Store or contact their customer service.

Official ICC Store: ICC Store on Amazon