Introduction
This manual provides comprehensive instructions for the Avital 7352L 2-Way 5-Button LCD Replacement Remote. This remote is designed to replace the original 2-way remote found in the Avital 5303L remote start with security system, offering enhanced vehicle security and convenience through its two-way communication and LCD display.
Key Features
- Avital 2-Way replacement remote with up to one and a half mile range. Comes with AAA battery installed.
- 5-Button remote control with premium LCD display.
- Provides visual and audible confirmation when commands are sent successfully.
- Priority icons map for simple and clear vehicle monitoring.
- Lock, unlock and start your vehicle remotely with the touch of a button.
What's in the Box
- Avital 7352L Remote
- Instruction Manual
- 1 AAA Battery (pre-installed)
Setup
Battery Installation
The Avital 7352L remote requires one AAA battery, which is typically included and pre-installed.
- Locate the battery compartment on the back of the remote.
- Open the compartment cover.
- Insert the AAA battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Remote Programming (Pairing)
This remote is a replacement and needs to be programmed to your vehicle's Avital security system (e.g., 5303L). The exact programming steps may vary slightly depending on your specific system and vehicle. Refer to your vehicle's security system manual for detailed programming instructions.
General Programming Tip: Many users have found success by temporarily removing the battery from the original key fob (if you have one) before attempting to program the new replacement remote. This can prevent the system from trying to reprogram the original fob instead of the new one.
If you encounter difficulties, it is recommended to consult a professional installer or refer to the official Avital support resources.
Operating Instructions
Remote Buttons
The Avital 7352L features 5 buttons, with the primary functions accessible via the two main buttons below the LCD screen.
- Lock Button (Padlock Icon): Press to lock your vehicle's doors and arm the security system.
- Unlock/Trunk Release Button (Open Padlock/Trunk Icon): Press to unlock your vehicle's doors and disarm the security system. A long press may activate the trunk release function, if configured.
- Other Buttons: The remote has additional side buttons for functions like remote start, auxiliary controls, and menu navigation. Refer to your main security system manual for specific functions assigned to these buttons.
LCD Display Interpretation
The premium LCD display provides visual feedback on your vehicle's status and remote commands.
| Icon/Display Element | Description |
|---|---|
| Time (e.g., AM 5:21) | Displays the current time. |
| Lock Icon | Indicates the vehicle's doors are locked and the security system is armed. |
| Signal Strength Bars | Shows the strength of the signal between the remote and the vehicle. More bars indicate a stronger connection. |
| Battery Icon | Displays the current battery level of the remote. Replace the AAA battery when the level is low. |
| Car Icon | A visual representation of the vehicle, often used in conjunction with other icons to show status (e.g., doors open, trunk open, remote start active). |
| Audible Confirmation | The remote provides beeps or vibrations to confirm successful command transmission. |
| Visual Confirmation | The LCD screen updates to reflect the status of the command (e.g., "Locked," "Unlocked," "Started"). |
Maintenance
Battery Replacement
When the battery icon on the LCD display indicates a low charge, it's time to replace the AAA battery.
- Open the battery compartment on the back of the remote.
- Remove the old AAA battery.
- Insert a new AAA battery, ensuring correct polarity.
- Close the compartment cover.
Note: Use only high-quality AAA alkaline batteries for optimal performance and longevity.
Care and Handling
- Avoid exposing the remote to extreme temperatures, direct sunlight, or moisture.
- Do not drop the remote or subject it to strong impacts.
- Clean the remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the remote away from strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding | Low or dead battery | Replace the AAA battery. |
| Remote not responding | Out of range | Move closer to the vehicle. The remote has up to a 1.5-mile range, but obstacles can reduce this. |
| Remote not responding | Not properly programmed | Re-program the remote to your vehicle's security system. Refer to the "Remote Programming" section or your main system manual. |
| LCD display is blank or dim | Low or dead battery | Replace the AAA battery. |
| Inconsistent operation | Interference | Move away from sources of strong radio interference (e.g., power lines, large metal structures). |
If problems persist after attempting these solutions, contact Avital customer support or a certified installer.
Specifications
- Model Number: 7352L
- Product Dimensions: 7.9 x 5.8 x 1 inches
- Item Weight: 4 ounces
- Battery Type: 1 AAA battery (included)
- Connectivity: Radio Frequency (RF) 2-Way Communication
- Color: Black
- Special Feature: Ergonomic design, LCD display
- Max Number of Supported Devices: 1 (per remote)
- Compatible Devices: Avital vehicle security and remote start systems (e.g., 5303L)
- Manufacturer: DIRECTED ELECTRONICS INC
Warranty and Support
For warranty information and technical support, please refer to the official Avital website or contact DIRECTED ELECTRONICS INC directly.
Avital Store: Visit the Avital Store on Amazon
Manufacturer: DIRECTED ELECTRONICS INC
Protection Plans: Additional protection plans may be available for purchase from your retailer. These plans are separate from the manufacturer's warranty and offer extended coverage.
