parts-quick 2GB SD Memory Card User Manual

1. Introduction

This manual provides instructions for the proper use and care of your parts-quick 2GB SD Memory Card. This memory card is designed to expand the storage capacity of compatible digital cameras, including various Vivitar ViviCam models, allowing you to store photos and videos.

2. Setup and Installation

2.1 Compatibility

This 2GB SD Memory Card is compatible with the following Vivitar ViviCam models:

• Vivitar ViviCam 5110
• Vivitar ViviCam 5188
• Vivitar ViviCam 5199
• Vivitar ViviCam 5299
• Vivitar ViviCam 5355
• Vivitar ViviCam 6385u
• Vivitar ViviCam 7100s
• Vivitar ViviCam 7330
• Vivitar ViviCam 7388s
• Vivitar ViviCam 7399
• Vivitar ViviCam 7410
• Vivitar ViviCam 7500i
• Vivitar ViviCam 8300s
• Vivitar ViviCam 8325
• Vivitar ViviCam DVR-550
• Vivitar ViviCam DVR-560G
• Vivitar ViviCam T25
• Vivitar ViviCam X325

2.2 Inserting the SD Card

1. Ensure your Vivitar ViviCam camera is powered off before inserting or removing the memory card.
2. Locate the memory card slot on your camera. This is typically found on the side or bottom, often under a protective cover.
3. Orient the 2GB SD Memory Card with the metal contacts facing into the camera and the beveled corner aligned with the slot.
4. Gently push the card into the slot until it clicks into place. Do not force the card.
5. Close the protective cover, if applicable.

This image shows the 2GB SD Memory Card. Ensure proper orientation when inserting into your device.

3. Operating Instructions

3.1 Initializing the Card

After inserting the SD card, power on your Vivitar ViviCam. The camera may prompt you to format the new memory card. It is recommended to format the card within the camera for optimal performance and compatibility. Refer to your camera's user manual for specific formatting instructions.

3.2 Storing Data

Once formatted, the 2GB SD Memory Card will automatically be used by your camera to store photos and videos. The card's 2GB capacity provides ample space for a significant number of images and video clips, depending on your camera's resolution settings.

3.3 Data Transfer Speed

This is a Class 2 SD card, indicating a minimum write speed of 2MB/s. This speed is suitable for standard definition video recording and general photography with compatible cameras.

3.4 Removing the SD Card

1. Ensure your Vivitar ViviCam camera is powered off.
2. Open the memory card slot cover.
3. Gently push the SD card inward until it clicks, then release. The card should partially eject.
4. Carefully pull the card out of the slot.

4. Maintenance and Care

• Handle with Care: Avoid touching the metal contacts on the card to prevent damage or data corruption.
• Keep Dry: Protect the memory card from moisture and liquids.
• Temperature: Store the card in a cool, dry place, away from extreme temperatures.
• Cleaning: If necessary, gently wipe the card with a soft, dry, lint-free cloth. Do not use harsh chemicals.
• Static Electricity: Avoid exposing the card to static electricity, which can damage the internal components.

5. Troubleshooting

5.1 Card Not Recognized

• Ensure the card is fully inserted into the camera's memory card slot.
• Power off and then power on the camera.
• Remove the card, inspect the metal contacts for dirt or damage, and reinsert it.
• Try the card in another compatible device to determine if the issue is with the card or the camera.

5.2 Data Transfer Errors

• Ensure the card is securely connected to your computer or card reader.
• Avoid disconnecting the card during data transfer.
• If errors persist, try formatting the card (Note: This will erase all data on the card).

5.3 Slow Performance

• Ensure your camera settings are appropriate for a Class 2 card. High-resolution video or rapid burst photography may require faster cards.
• Periodically format the card to maintain optimal performance.

6. Specifications

7. Warranty and Support

This parts-quick 2GB SD Memory Card comes with a One Year Warranty provided by parts-quick. For technical assistance or warranty claims, please contact parts-quick directly. Toll-free technical support is available.

For further details regarding the warranty or to access technical support, please refer to the contact information provided with your purchase or visit the official parts-quick website.