C2G Legrand Cat6 Shielded Ethernet Patch Cable Instruction Manual

1. Introduction

This manual provides essential information for the C2G Legrand Cat6 Shielded Ethernet Patch Cable, Model 00817. This cable is designed to protect high-speed networks from noise and electromagnetic interference, ensuring reliable connectivity for voice, data, and video distribution. It is suitable for bandwidth-intensive applications and is engineered to reduce impedance and structural return loss (SRL).

2. Product Overview

The C2G Cat6 Shielded Ethernet Patch Cable is a high-quality networking solution. Key features include:

• Cat6 Ethernet Cable: One (1) Black 10 Foot Network Patch Cable with RJ45 Male Connector.
• Versatile Use: Ideal for voice, data, and video distribution, handling bandwidth-intensive applications while drastically reducing impedance and structural return loss (SRL).
• Durable Construction: Features a copper braid and PVC jacket, designed to support 10 Gigabit data transmission from 10GBase-T ports and equipment such as network adapters, hubs, routers, and modems.
• High Quality Assurance: This snagless STP Ethernet cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements. Individual pairs are bonded to maintain twist-spacing up to the termination point, minimizing Near-End Crosstalk (NEXT) levels.
• C2G Brand Reliability: From Cables 2 Go, a trusted provider of connectivity solutions since 1984, now part of Legrand.

Figure 2.1: C2G Legrand Cat6 Shielded Ethernet Patch Cable, 10 Feet, Black. This image shows the cable coiled with both RJ45 connectors visible.

3. Setup

The C2G Cat6 Shielded Ethernet Patch Cable is designed for simple plug-and-play installation. Follow these steps to connect your devices:

1. Identify the Ethernet ports on the two devices you wish to connect (e.g., a router and a computer, or a modem and a network switch).
2. Carefully insert one end of the C2G Cat6 cable into the Ethernet port of the first device. Ensure the RJ45 connector clicks securely into place.
3. Insert the other end of the C2G Cat6 cable into the Ethernet port of the second device, ensuring it also clicks securely.
4. Verify that both connections are firm and that the cable is not kinked or excessively bent.

Figure 3.1: Close-up view of the C2G Legrand Cat6 RJ45 connector, highlighting the snagless boot and shielded design.

4. Operating Instructions

Once connected, the C2G Cat6 Shielded Ethernet Patch Cable operates automatically to facilitate network communication between your devices. No additional configuration is typically required for the cable itself.

• Ensure that both connected devices are powered on and configured for network access.
• The cable will transmit data at speeds up to 10 Gigabit, depending on the capabilities of your connected equipment and network infrastructure.
• The shielding helps maintain signal integrity and reduce interference, which is particularly beneficial in environments with high electromagnetic noise.

5. Maintenance

Proper care of your C2G Cat6 Shielded Ethernet Patch Cable will ensure its longevity and optimal performance:

• Avoid Sharp Bends: Do not bend the cable sharply, especially near the connectors, as this can damage the internal wires and shielding.
• Protect Connectors: Keep the RJ45 connectors clean and free from dust or debris. Avoid pulling the cable by the wire; always grasp the connector housing when plugging or unplugging.
• Temperature and Environment: Store and use the cable within its specified temperature rating (75°C). While rated for indoor/outdoor use, avoid prolonged exposure to extreme weather conditions unless specifically designed for such environments.
• Cleaning: If necessary, gently wipe the cable with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

6. Troubleshooting

If you experience network connectivity issues, consider the following troubleshooting steps:

• No Network Connection:
  • Ensure both ends of the cable are securely plugged into their respective ports.
  • Check if the network indicator lights on your devices (e.g., router, computer Ethernet port) are active.
  • Try using a different Ethernet port on your devices.
  • Test the cable with another known working device or replace it with a different Ethernet cable to rule out a cable fault.
• Slow Network Speed:
  • Verify that your network devices (router, modem, network card) support the desired speed (e.g., 10 Gigabit).
  • Ensure the cable is not damaged, kinked, or running near strong sources of electromagnetic interference.
  • Check for updated drivers for your network adapter.
• Intermittent Connection:
  • Inspect the RJ45 connectors for any bent pins or damage.
  • Ensure the cable is not being moved or disturbed frequently, which could loosen connections.
  • Consider if external interference sources are present and if the cable's shielding is effective in your environment.

If issues persist after these steps, consult the support resources listed in Section 8.

7. Specifications

8. Warranty Information

C2G products are designed for reliability and performance. For specific warranty details regarding your C2G Legrand Cat6 Shielded Ethernet Patch Cable (Model 00817), please refer to the official C2G website or contact their customer support. Warranty terms typically cover manufacturing defects and material flaws under normal use conditions.

9. Support

For further assistance, technical support, or to inquire about additional products, please visit the official C2G website or contact their customer service department. You can find contact information and FAQs on their website:

Visit C2G Official Website

When contacting support, please have your product model (00817) and purchase information readily available.