Product Overview
The Creative Sound Blaster Audigy Rx is an advanced sound card designed to elevate your audio experience from basic motherboard sound to immersive cinematic surround sound. Featuring an advanced chipset that processes the legendary EAX reverb engine, it delivers superb 7.1 multi-channel audio with a Signal-to-Noise Ratio (SNR) of 106dB. The included Sound Blaster Audigy Rx Control Panel software provides comprehensive control over all aspects of your sound card, including EAX Studio for hardware-accelerated environmental effects in music, movies, games, and voice communications.
Key Features:
- Advanced chipset for powerful enhanced audio with EAX reverb engine.
- Immersive 7.1 multi-channel audio for games, movies, and music.
- 106dB SNR for high-quality audio.
- 600-ohm headphone amplifier for studio-grade monitoring.
- High-quality 24-bit 192 kHz stereo direct playback.
- Dual microphone inputs for clear voice capture and recording.
Installation and Setup
This section guides you through the physical installation of your Creative Sound Blaster Audigy Rx PCIe sound card into your computer system.
Physical Installation:
Ensure your computer is powered off and unplugged. Open your computer case and locate an available PCIe x1 slot on your motherboard. Gently insert the sound card into the slot until it is firmly seated. Secure the card with a screw to the case.
This image displays the Creative Sound Blaster Audigy Rx sound card, highlighting its compact design and the array of audio input/output jacks, including line-in, mic-in, front, rear, center/subwoofer, and side outputs, along with the PCIe connector for motherboard integration.
Driver Installation:
After physical installation, power on your computer. Insert the provided Installation CD (if applicable) or download the latest drivers from the official Creative website. Follow the on-screen instructions to complete the driver installation. This step is crucial for the sound card to function correctly and unlock its full features.
For detailed instructions, please refer to the official Installation Manual (PDF) or User Manual (PDF).
Product Overview Video:
This video provides a detailed overview of the Creative Sound Blaster Audigy Rx sound card, showcasing its design, various ports, and demonstrating the straightforward PCIe installation process. It highlights the card's compact form factor and connectivity options for enhanced audio.
Operating Your Sound Card
Audio Output Configuration:
The Sound Blaster Audigy Rx supports up to 7.1 multi-channel speaker output. Connect your speakers or headphones to the appropriate color-coded jacks on the sound card's rear panel. Use the Creative Sound Blaster Audigy Rx Control Panel software to configure your speaker setup (stereo, 5.1, 7.1) and optimize audio output.
Microphone and Line-In Usage:
Utilize the dual microphone inputs for clear voice capture, ideal for gaming, streaming, or recording. The line-in input allows connection of external audio sources. Adjust input levels and apply effects through the control panel software.
Headphone Amplifier:
The integrated 600-ohm headphone amplifier provides powerful and clear audio for demanding studio headphones. Connect your headphones to the dedicated headphone jack for an immersive listening experience.
EAX Effects and Software Customization:
Leverage the hardware-accelerated EAX (Environmental Audio eXtensions) effects for enhanced audio realism in games, movies, and music. The Sound Blaster Audigy Rx Control Panel and EAX Studio software offer extensive customization options, including equalizer settings, CMSS (Creative Multi Speaker Surround) for upmixing stereo content, and various environmental effects.
Maintenance
To ensure optimal performance and longevity of your Sound Blaster Audigy Rx sound card, keep your computer's interior clean and free of dust. Regularly update drivers from the official Creative website to benefit from performance improvements and bug fixes. Avoid exposing the card to extreme temperatures or humidity.
Troubleshooting
| Issue | Possible Solution |
|---|---|
| No Sound Output | Check speaker/headphone connections. Ensure correct audio output device is selected in your operating system's sound settings. Verify driver installation. If using analog jacks, ensure 'Audigy Analog/Digital Output Jack' is set to ON in the mixer control. |
| Distorted Audio | Reduce volume levels. Check for updated drivers. Adjust equalizer settings in the Sound Blaster Control Panel. Ensure speakers/headphones are properly connected and not damaged. |
| Microphone Not Working | Ensure microphone is correctly plugged into the mic-in jack. Check microphone privacy settings in your operating system. Adjust microphone input levels in the Sound Blaster Control Panel. |
| Card Not Detected by System | Ensure the card is firmly seated in the PCIe slot. Try a different PCIe slot if available. Check your motherboard's BIOS settings to ensure PCIe slots are enabled. |
Specifications
- Brand: Creative
- Series: 70SB155000001
- Item model number: 70SB155000001
- Hardware Platform: Headphones, PC, Speakers
- Item Weight: 4.2 ounces
- Product Dimensions: 5.71 x 4.72 x 0.71 inches
- Item Dimensions LxWxH: 5.71 x 4.72 x 0.71 inches
- Number of Processors: 1
- Computer Memory Type: DDR3 SDRAM
- Manufacturer: Creative
- ASIN: B00EO6X7PG
- Is Discontinued By Manufacturer: No
- Date First Available: August 20, 2013
- Customer Reviews: 4.2 out of 5 stars (2,615 ratings)
- Best Sellers Rank: #2 in Computer Internal Sound Cards
- Compatible Devices: Personal Computer
- Hardware Interface: PCIE x 1, PCI Express x1
- Audio Output Mode: 7.1
- Platform: Windows Vista, Windows XP, Windows 8, Windows 7, Windows 10
What's in the Box
- Sound Blaster Audigy Rx
- Quick Start leaflet
- Installation CD
Warranty and Support
For warranty information and technical support, please visit the official Creative website or contact Creative customer service. Keep your proof of purchase for warranty claims.
You can also visit the Creative Store on Amazon for more product information and resources.
