1. Safety Information
Please read all safety instructions carefully before using the Taylor Infrared Thermometer. Keep this manual for future reference.
- Do not point the thermometer directly at the sun or other strong light sources.
- Avoid direct eye exposure to the infrared beam.
- Keep the device away from water and excessive moisture.
- Do not attempt to disassemble or modify the thermometer.
- Store in a cool, dry place when not in use.
Battery Safety Warning: This image illustrates a general warning regarding button cell batteries, which can pose an ingestion hazard, especially to children. While this specific thermometer uses AA batteries, it is crucial to handle all batteries safely. Keep batteries out of reach of children and dispose of them properly according to local regulations.
Battery Precautions
- Use only the specified battery type (2 AA batteries).
- Ensure correct polarity when inserting batteries.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the device will not be used for an extended period.
2. Product Overview
The Taylor Infrared Thermometer is designed for safe, non-contact surface temperature measurement. It features a compact design with easy-to-use controls.
Product Components: This image displays the Taylor Infrared Thermometer unit, its protective rubber casing, and the included lanyard. The thermometer is white with a digital display, a 'SCAN' button, and a 'MODE' button.
Key Components
- Infrared Sensor: Located at the top, used for non-contact temperature detection.
- LCD Display: Shows temperature readings, unit of measurement, and other indicators.
- SCAN Button: Initiates a temperature measurement.
- MODE Button: Toggles between functions such as Fahrenheit/Celsius, Min/Max, and Lock.
- Battery Compartment: Located at the bottom/rear for battery insertion.
- Protective Rubber Casing: Provides durability and grip.
- Lanyard: For convenient carrying.
3. Package Contents
Verify that all items are present in your package:
- Taylor Infrared Thermometer Unit
- Protective Rubber Casing
- Lanyard
- 2 AA Batteries (included)
- Instruction Guide (this manual)
4. Setup
Battery Installation
The thermometer requires 2 AA batteries for operation.
- Locate the battery compartment cover on the bottom or rear of the thermometer.
- Slide or unclip the cover to open the compartment.
- Insert 2 AA batteries, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
- Replace the battery compartment cover securely.
Initial Power On
Once batteries are installed, the device should power on automatically or by pressing the SCAN button. The LCD display will illuminate.
5. Operating Instructions
Taking a Measurement
To measure surface temperature:
- Point the infrared sensor at the surface you wish to measure. Ensure the target is within the thermometer's field of view.
- Press and hold the SCAN button. The temperature reading will appear on the LCD display almost instantly (within one second).
- Release the SCAN button to hold the reading on the display.
Changing Temperature Units (Fahrenheit/Celsius)
To switch between Fahrenheit (°F) and Celsius (°C):
- With the thermometer powered on, press the MODE button. Each press will toggle the unit of measurement displayed on the screen.
Scan, Lock, Minimum/Maximum Temperature, and Auto Shut-off
- Scan: Press and hold the SCAN button to continuously scan and display the current temperature.
- Lock: Release the SCAN button to lock the last measured temperature on the display.
- Minimum/Maximum Temperature: The MODE button may allow cycling through minimum and maximum temperatures recorded during a scan, depending on the specific model's firmware. Refer to on-screen indicators.
- Auto Shut-off: The thermometer is equipped with an auto shut-off feature to conserve battery life. It will automatically turn off after a period of inactivity.
6. Maintenance
Cleaning
To clean the thermometer:
- Wipe the unit clean with a soft, damp cloth.
- Do not use abrasive cleaners or immerse the device in water.
- Keep the infrared lens clean and free of dust or debris for accurate readings.
Storage
When not in use, store the thermometer in its protective rubber casing in a cool, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display/Device won't turn on | Dead or incorrectly inserted batteries | Replace batteries with new AA batteries, ensuring correct polarity. |
| Inaccurate readings | Dirty sensor lens; Device not acclimated to ambient temperature; Target too far or too small | Clean the sensor lens; Allow device to acclimate for 20-30 minutes; Ensure target is within range and large enough. |
| Display shows "LO" or "HI" | Temperature is outside the measurement range | Ensure the target temperature is within -67 to 428 degrees Fahrenheit (-55 to 220 degrees Celsius). |
8. Specifications
- Model Number: 9527
- Measurement Range: -67 to 428 degrees Fahrenheit (-55 to 220 degrees Celsius)
- Response Time: 1 second
- Power Source: 2 AA batteries (included)
- Product Dimensions: 6.69 x 5.91 x 0.24 inches
- Weight: 2.4 ounces
- Material: Rubber (outer casing)
- Display Type: Digital
- Connectivity Technology: Infrared
9. Warranty and Support
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact Taylor customer service through their official website or the retailer where the product was purchased.
For more information, you may visit the Taylor Store on Amazon.
