Introduction
This manual provides essential information for the proper use and maintenance of your Transcend 32GB Secure Digital High Capacity (SDHC) Flash Memory Card. Designed for reliable data storage, this Class 10 card is ideal for digital cameras, camcorders, and other compatible devices requiring high-speed data transfer.
Setup and Installation
- Check Compatibility: Ensure your device (e.g., digital camera, camcorder, card reader) supports SDHC memory cards. SDHC cards are not backward compatible with standard SD devices.
- Insert the Card: Locate the memory card slot on your device. With the card's gold contacts facing down (or as indicated by your device's manual), gently slide the Transcend SDHC card into the slot until it clicks into place. Do not force the card.
- Format the Card (Optional but Recommended): For optimal performance and to ensure compatibility with your specific device, it is recommended to format the card using your device's built-in formatting function. Refer to your device's user manual for instructions on how to format a memory card. Warning: Formatting will erase all data on the card. Back up any important files before formatting.
Operating Instructions
- Recording Data: Once installed and formatted, your device will automatically recognize the SDHC card as storage. You can now capture photos, record videos, or save other files directly to the card.
- Transferring Data to a Computer:
Using a Card Reader: Remove the SDHC card from your device and insert it into a compatible SDHC card reader connected to your computer. The card will appear as a removable drive. You can then drag and drop files to your computer.
Direct Device Connection: Connect your device (e.g., camera) directly to your computer using a USB cable. Follow your device's instructions for transferring files. The card will typically be accessible through the device's software or as a removable drive.
- Write Protection Switch: The Transcend SDHC card features a small write-protection switch on its side. Sliding this switch down (towards the "Lock" position) prevents new data from being written to the card and existing data from being deleted. Slide it up (towards the "Unlock" position) to enable writing and deleting.
Maintenance and Care
- Handle with Care: Avoid bending, dropping, or exposing the card to excessive force.
- Keep Clean: Do not touch the gold contacts. If necessary, gently clean the contacts with a soft, lint-free cloth.
- Storage: Store the card in its protective case when not in use to prevent dust, moisture, and static electricity damage. Avoid extreme temperatures and direct sunlight.
- Safe Removal: Always safely eject the card from your computer or device before physically removing it to prevent data corruption.
- Backup Data: Regularly back up important data from your memory card to another storage device (e.g., computer hard drive, cloud storage) to prevent data loss.
Troubleshooting
- Card Not Recognized:
- Ensure the card is fully inserted into the slot.
- Check if your device supports SDHC cards. Older devices may only support standard SD cards.
- Verify the write-protection switch is in the "Unlock" position if you are trying to write data.
- Try the card in another compatible device or card reader to rule out a device issue.
- If the card was previously used in another device, try formatting it in the current device (after backing up data).
- Slow Data Transfer:
- Ensure your card reader and USB port (if applicable) support high-speed data transfer (e.g., USB 3.0 for optimal speed).
- The card's speed (Class 10) indicates minimum write speed. Actual speeds can vary based on the host device and file types.
- Data Corruption or Errors:
- Always safely eject the card before removal.
- Avoid removing the card or powering off the device during data transfer or recording.
- If errors persist, try formatting the card. If issues continue, the card may be faulty.
Specifications
| Feature | Detail |
|---|---|
| Brand | Transcend |
| Model Name | Vivitar ViviCam X022 |
| Item Model Number | ViviCam X022-SD32GB |
| Flash Memory Type | SDHC (Secure Digital High Capacity) |
| Memory Storage Capacity | 32 GB |
| Speed Class | Class 10 |
| Hardware Interface | SDHC, Secure Digital Card |
| Compatible Devices | Camera (and other SDHC compatible devices) |
| Item Weight | 1.6 ounces |
| Color | Black |
Warranty and Support
For warranty information and technical support, please refer to the official Transcend website or contact their customer service directly. Keep your proof of purchase for warranty claims.
You can visit the Transcend Store on Amazon for more product information.