1. Introduction
The Sigma Sport ROX 10.0 GPS is a versatile bike computer designed for cyclists seeking detailed performance data and navigation capabilities. It features a highly sensitive GPS receiver and ANT+ wireless transmission technology, making it compatible with various sensors for speed, cadence, power, and heart rate. This manual provides comprehensive instructions for setting up, operating, and maintaining your ROX 10.0 GPS device, ensuring you get the most out of its advanced functions, including route creation, dynamic elevation profiles, and data analysis with the DATA CENTER 3 software.
2. Package Contents
Before you begin, please ensure all items are present in your package:
- Sigma Sport ROX 10.0 GPS Device
- ANT+ Speed Transmitter
- ANT+ Cadence Transmitter
- ANT+ Heart Rate Transmitter
- Mounting Hardware for Speed and Cadence Sensors
- Heart Rate Chest Strap
- Micro USB Cable
- AC/DC Adapter (Charger)
- DATA CENTER 3 Mapping and Evaluation Software (usually via download or included media)
Image: Sigma Sport ROX 10.0 GPS Set showing the cadence, speed, and heart rate sensors neatly arranged in its product box.
Image: All components of the Sigma Sport ROX 10.0 GPS Set, including the main unit, sensors, cables, and mounting accessories, spread out on a white surface.
Image: A close-up view of the black AC/DC adapter (charger) with the Sigma logo, used for charging the ROX 10.0 GPS device.
3. Setup
3.1 Device Overview and Buttons
The ROX 10.0 GPS features a large display and is operated using six buttons. Familiarize yourself with their functions:
- START/LAP Button (Bottom Left): Initiates or records a lap during a training session.
- MODE Button (Bottom Right): Switches between different display views or menu options.
- Minus (-) Button (Bottom Center Left): Navigates down in menus or decreases values.
- Plus (+) Button (Bottom Center Right): Navigates up in menus or increases values.
- ENTER Button (Top Right): Confirms selections or zooms in on display values.
- BACK/STOP Button (Top Left): Returns to the previous menu or stops a training session.
3.2 Sensor Pairing (ANT+ Transmitters)
The ROX 10.0 GPS is compatible with ANT+ speed, cadence, power, and heart rate sensors. To ensure accurate data, pair your sensors with the device:
- Ensure your sensors (Speed, Cadence, Heart Rate) have fresh batteries and are active.
- Power on the ROX 10.0 GPS device.
- Navigate to the 'Settings' menu.
- Select 'Sensors' or 'ANT+ Pairing'.
- Choose the type of sensor you wish to pair (e.g., Speed, Cadence, Heart Rate).
- Follow the on-screen prompts to initiate the pairing process. The device will search for nearby active ANT+ sensors.
- Once detected, confirm the pairing.
Refer to the specific sensor's manual for detailed instructions on activating and positioning each sensor on your bike or body.
3.3 Mounting the Device and Sensors
Securely mount your ROX 10.0 GPS and its sensors for optimal performance:
- ROX 10.0 GPS Unit: Use the provided bike mount to attach the device to your handlebar or stem. Ensure it clicks securely into place.
- Speed Sensor: Mount the speed sensor on the front or rear fork, aligning it with the spoke magnet.
- Cadence Sensor: Attach the cadence sensor to the chainstay, aligning it with the crank magnet.
- Heart Rate Monitor: Wear the heart rate chest strap directly on your skin, just below your chest muscles, ensuring the electrodes are moistened for proper contact.
3.4 Charging the Device
The ROX 10.0 GPS has an integrated Li-ion rechargeable battery. To charge:
- Connect the micro USB cable to the charging port on the device.
- Connect the other end of the USB cable to the provided AC/DC adapter or a computer's USB port.
- The device will indicate charging status on its display.
- A full charge typically takes several hours. Disconnect once fully charged to preserve battery life.
4. Operation
4.1 Power On/Off
- To Power On: Press and hold the ENTER button for approximately 2-3 seconds. The main menu will appear.
- To Power Off: From the main menu, navigate to 'Settings' and select 'Power Off', or if in training mode, stop the session and then power off. The device will also automatically switch off if the exercise time stops for more than 5 minutes.
4.2 Main Menu Navigation
From the main menu, use the Plus (+) and Minus (-) buttons to scroll through options such as 'Training', 'Load Track', 'Memory', 'Status Info', 'Extras', and 'Settings'. Press ENTER to select an option.
4.3 Training Mode
Upon entering 'Training' mode, the device displays the classic Sigma bike computer view. The top line shows GPS signal strength and battery status. Below this, four current values are displayed: heart rate, altitude, cadence, and incline. The current speed is prominently displayed in the middle. The lower display area can be customized.
- Zooming Values: Press ENTER to zoom in and enlarge individual values for better readability.
- Customizing Lower Display: Use the Plus (+) or Minus (-) buttons to switch between 10 different functions defined in 'Favorites A' and 'Favorites B' (configured in 'Settings').
- Track View: Press the MODE button to switch to 'Track' view. This displays the satellite search signal, a loaded track, or the track already ridden. Use Plus (+) to zoom in and Minus (-) to zoom out.
- Altitude Profile: Press MODE again to switch to the 'Altitude' display area, showing a graphical view of the altitude profile. If a track is loaded, it shows the profile for the track and your current position. If no track is loaded, it shows the profile for the distance you have already ridden.
4.4 Starting, Stopping, and Saving a Training Session
- To Start: From the 'Training' menu, press the START/LAP button. The device will begin recording your session. If speed is detected before pressing START, a reminder "Speed detected! press START!" will appear.
- To Stop: During a training session, press the BACK/STOP button. The exercise time will pause.
- To Save and Reset: After stopping, press and hold the BACK/STOP button. This will save the details of your training session and reset the trip data.
- To Continue Recording: If the device has powered off automatically, switch it back on, select 'Training' mode, and press the START/LAP button to resume recording the current session.
4.5 Auto-Pause Function
If the auto-pause function is activated (can be toggled in the Short Menu), the recording will automatically pause if no speed is detected (e.g., when you stop at a traffic light). Recording resumes automatically when speed is detected again.
4.6 Short Menu
While in the 'Training' menu, you can access the Short Menu by simultaneously pressing the BACK/STOP and ENTER buttons. This menu allows you to configure various settings quickly:
- Altitude: Calibrate the current altitude.
- Favorites A/B: Switch between or configure your preferred display views.
- Load Track: Load a track that has either been ridden previously or saved on the device.
- Track Settings: Adjust settings related to track navigation.
- Target Zone Alarm: Toggle the target zone alarm on or off.
- Auto Pause: Toggle the auto-pause function on or off.
- Bike Selection: Select the current training bike.
- Calibrate Compass: Calibrate the integrated digital 3-axis compass.
Press the BACK/STOP button to exit the Short Menu.
Official Product Video: Sigma Sport ROX 10.0 GPS Functions Overview
Video: This video provides a detailed explanation of the Sigma Sport ROX 10.0 GPS functions, including button operations, menu navigation, and various display modes for training data, track, and altitude profiles. It demonstrates how to start, pause, and save training sessions, and access the short menu for quick settings adjustments.
5. Data Management with DATA CENTER 3
The Sigma Sport ROX 10.0 GPS is designed to work seamlessly with the DATA CENTER 3 mapping and evaluation software. This software allows you to:
- Create, Modify, and Save Routes: Plan your rides in advance and upload them to your device for navigation.
- Analyze Training Data: Review detailed statistics from your training sessions, including speed, distance, altitude, heart rate, cadence, and power.
- Manage Device Settings: Configure various settings on your ROX 10.0 GPS from your computer.
- Export Data: Export your training data in various formats for use with other platforms or for archiving.
Connect your device to your computer using the micro USB cable to synchronize data with DATA CENTER 3. Refer to the DATA CENTER 3 software manual for detailed instructions on its features and usage.
6. Specifications
| Item Package Dimensions L x W x H | 9 x 5.6 x 2.7 inches |
| Package Weight | 13.6 ounces |
| Item Dimensions L x W x H | 6.5 x 5.75 x 2 inches |
| Item Weight | 0.85 Pounds |
| Brand Name | Sigma |
| Color | White |
| Number of Items | 1 |
| Manufacturer | Sigma |
| Part Number | 40-1685-WHI-NON |
| Sport Type | Cycling |
| Screen Size | 1.7 Inches |
| Connectivity Technology | ANT |
| Map Type | North America |
| Battery Life | 13 Hours |
| Mounting Type | Wrist Mount (Note: Primarily bike mount, but can be adapted) |
| Display Type | LCD |
| Human Interface Input | Buttons |
| Control Method | Buttons |
7. Troubleshooting
- Device Not Powering On: Ensure the battery is charged. Connect to the charger and try again.
- Sensors Not Connecting:
- Check sensor batteries.
- Ensure sensors are properly mounted and aligned with magnets (if applicable).
- Re-initiate the pairing process from the 'Settings' menu on the ROX 10.0 GPS.
- Ensure no other ANT+ devices are interfering.
- GPS Signal Loss:
- Ensure you are in an open area with a clear view of the sky.
- Avoid areas with tall buildings or dense tree cover.
- Allow the device sufficient time to acquire a signal upon startup.
- Inaccurate Data:
- Verify sensor calibration and settings in the device menu and DATA CENTER 3.
- Ensure wheel circumference is correctly entered if using a speed sensor.
- Calibrate the compass and altitude as needed, especially before starting a new ride in a different location.
- Software Issues (DATA CENTER 3):
- Ensure you have the latest version of DATA CENTER 3 installed.
- Check for device firmware updates via DATA CENTER 3.
- Consult the DATA CENTER 3 help documentation or Sigma Sport support.
8. Maintenance
- Cleaning: Wipe the device and sensors with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: For long-term storage, charge the battery to approximately 50% to prolong its lifespan. Recharge periodically if stored for extended periods.
- Firmware Updates: Regularly check for and install firmware updates via DATA CENTER 3 to ensure optimal performance and access to new features.
9. Warranty & Support
Sigma Sport products are designed for durability and performance. For warranty information, please refer to the documentation included with your product or visit the official Sigma Sport website. For technical support, product registration, or further assistance, please visit:
- Sigma Sport Website: www.sigma-rox.com
- YouTube Channel for Tutorials: Search for "SIGMA Elektro" on YouTube for video tutorials on the ROX 10.0 GPS and other Sigma products.
Sigma Sport is committed to providing quality products and outstanding customer service.
